Skip to the content
2 layers295 × 80 mmFront panel.processor, the printed circuit board in 3D

Front panel.processor

lynchaj/duodyne15

Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

Size
295 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
123
Pads
271
Tracks, vias
1,117, 98
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Mar 2023
Updated
27 Jul 2025

Overview

Front panel.processor is an open-source printed circuit board by lynchaj, from the lynchaj/duodyne repository on GitHub. It is a 2-layer board of 295 × 80 mm with 40 parts on 123 nets, routed with 1,117 tracks and 98 vias.

It is built around the 74LS240DC and ESP32-S3-DEVKITC-1-N8. Its parts include 12 switches, 9 diodes, 5 ICs, 5 connectors and 3 resistors. It belongs with the retro computing and games boards and the ESP32 boards of this library.

Main components

2

README

README.md

duodyne

  • duodyne is a hobbyist retrocomputer system comprised of modules on a system bus. It is specifically designed to run RomWBW, however, provides support for multiple processor architectures and has a flexible and expandable system bus.

  • The system bus is designed to support multiple vintage or retro computer processor architectures such as those from Intel, Zilog, Motorola, Mostek, etc. The Z80 is the primary CPU used to develop the initial round of peripherals.

  • Duodyne borrows heavily from previous computer systems. The form factor is similar to S-100 and VME. The bus is electrically is derived from ECB with many extensions to support other processor architectures and improved power distribution. There are multiple pins for 5V and ground. +12V and -12V are supported. 3.3V and other values can be derived on board using voltage regulators.

  • The plan for the system is to have balance between functionality and complexity. A single function per board has good distribution and easy expansion but leads to many boards and a large backplane which can lead to electrical and signal distribution issues. However, full integration into a single board computer reduces complexity somewhat but can make expansion difficult.

  • Duoodyne's bus based approach with a generous board form factor allows for a blend of integration and distribution of two or more functions per board leading to a smaller overall backplane yet retaining flexibility for easy expansion.

  • The duodyne core system is defined as an 4-slot or 8-slot backplane, a Z80 or other processor (currently, Z80, 65C816, and TMS9995 are supported), and a ROMRAM board. The ROMRAM memory board assumes an 8-bit data bus so CPU's with larger data busses may require dedicated memory boards. The Z80 processor includes a debugging serial port for console access. The boot ROM is included on the ROMRAM board.

Parts

40
QtyValueFootprintReferences
11SW_SPDTSW_Toggle_Blue_wSlots:SW_Toggle_Blue_wSlotsSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12
9LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9
4MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
210KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2~Custom:HV-LVU3, U4
1470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6
1470Resistor_THT:R_Array_SIP9RN1
174LS240Package_DIP:DIP-20_W7.62mmU1
1ESP32-S3-DevKitCCustom:ESP32S3Devkit3UniversalU2
1FPANELConnector_IDC:IDC-Header_2x20_P2.54mm_HorizontalJ1
1LP2950-3.3_TO92Package_TO_SOT_THT:TO-92_InlineU5
1MICRO SD CARDConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ3
1Micro_SD_CardConnector_Card:SD_Hirose_DM1AA_SF_PEJ82J5
1SSD1306SSD1306:128x64OLEDBrd1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW9
1TTL SERIALConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1TTL Serial to WiFi EnableConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ4

More from lynchaj/duodyne

12
  • 2 layers160 × 200 mmRetro programmer, the printed circuit board in 3D

    Retro programmer

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    209 parts15
  • 2 layers235 × 160 mmTemplate.prototyping, the printed circuit board in 3D

    Template.prototyping

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    194 parts15
  • 2 layers235 × 160 mmInput output.Media, the printed circuit board in 3D

    Input output.Media

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    191 parts15
  • 2 layers235 × 160 mmInput output.Media, the printed circuit board in 3D

    Input output.Media

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    188 parts15
  • 2 layers200 × 160 mmSAB80535-Dev Board, the printed circuit board in 3D

    SAB80535-Dev Board

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    187 parts15
  • 2 layers235 × 160 mmInput output.Voice, the printed circuit board in 3D

    Input output.Voice

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    176 parts15
  • 2 layers235 × 160 mmInput output.Multi, the printed circuit board in 3D

    Input output.Multi

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    167 parts15
  • 2 layers235 × 160 mmInput output.GDC, the printed circuit board in 3D

    Input output.GDC

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    159 parts15
  • 2 layers235 × 160 mmInput output.Multi, the printed circuit board in 3D

    Input output.Multi

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    159 parts15
  • 2 layers235 × 160 mmMemory.ROMRAM, the printed circuit board in 3D

    Memory.ROMRAM

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    150 parts15
  • 2 layers235 × 160 mmMemory.ROMRAM, the printed circuit board in 3D

    Memory.ROMRAM

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    143 parts15
  • 2 layers235 × 160 mmInput output.SelfHost, the printed circuit board in 3D

    Input output.SelfHost

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    139 parts15

Similar boards

  • 2 layers295 × 80 mmFront panel.processor, the printed circuit board in 3D

    Front panel.processor

    danwerner21/duodyne_frontpanel_alt

    Alternate Duodyne Compatible Front Panel

    34 parts
  • 2 layers99.1 × 99.1 mmRC1802 CPU, the printed circuit board in 3D

    RC1802 CPU

    tebl/RC1802-Cosmac-ELF

    With the RC6502-project for making an Apple 1 replica done I wanted to do something different, so I started designing a simple version of the RCA 1802-based Cosmac ELF instead.

    54 parts31GPL-3.0
  • 2 layers100 × 100 mmALU1, the printed circuit board in 3D

    ALU1

    Left-Hand/74-gate-computer

    An logic gate computer made of 74 gates

    75 parts19
  • 2 layers220 × 173.3 mmSF-7017, the printed circuit board in 3D

    SF-7017

    fabiodl/sf7000

    Most of the work was done by Andrea Ottaviani https://github.com/aotta

    68 parts10GPL-3.0
  • 2 layers232.8 × 204.2 mmTIM-011B, the printed circuit board in 3D

    TIM-011B

    Board-Folk/TIM011B

    TIM-011 B Replica Board

    162 parts8
  • 2 layers364 × 203 mmCPU6S, the printed circuit board in 3D

    CPU6S

    Meisaka/CenMiniCom

    Centurion Minicomputer Schematics

    240 parts8
  • 2 layers149 × 167 mmMSX 4Slot Expander, the printed circuit board in 3D

    MSX 4Slot Expander

    LVina/MSX4SlotExpander

    MSX 4 Slots Expander Cartridge

    78 parts4GPL-3.0
  • 2 layers309.9 × 50.8 mmAcorn AIV SCSI Adapter, the printed circuit board in 3D

    Acorn AIV SCSI Adapter

    Domesday86/Acorn-AIV-SCSI-Adapter-Card

    A reproduction of the original Acorn AIV SCSI Adapter Card in KiCAD (as used in the BBC Domesday System)

    44 parts3CC-BY-SA-4.0

Questions

How big is the Front panel.processor PCB?

It measures 295 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Front panel.processor use?

40 parts, built around the 74LS240DC and ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Front panel.processor KiCad files?

From the lynchaj/duodyne repository on GitHub, at the commit this page was made from: the board is 13 front-panel.processor ALT/hardware/front-panel.processor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Front panel.processor design in my own project?

Its repository states no licence, so its author keeps all rights: ask lynchaj before reusing the design.