Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers30.4 × 52.6 mmMBus ESP Adapter, the printed circuit board in 3D

    MBus ESP Adapter

    tomasmcguinness/matter-esp32-mbus-adapter

    An ESP32-C6 adapter board for wired M-Bus (EN 13757) meters, with firmware examples that expose meter readings to a Matter fabric over Thread.

    42 parts2
  • 2 layersDmxduino, the printed circuit board in 3D

    Dmxduino

    TomatoPi/5FX-SeedFX

    Programable Guitar Pedal Using Eletrosmith Daisy Seed

    127 parts2
  • 4 layers90 × 65 mmM1s fpga playground, the printed circuit board in 3D

    M1s fpga playground

    tomek-szczesny/m1s-fpga-playground

    An add-on board with FPGA for ODROID M1S.

    188 parts2GPL-3.0
  • 2 layers50.8 × 22.9 mmFeather wing pmod, the printed circuit board in 3D

    Feather wing pmod

    TomKeddie/prj-pmod-feather

    Feather plate allow pmod usage

    13 parts2Unlicense
  • 2 layers76.6 × 30.1 mmEsp32s3mini cc1101, the printed circuit board in 3D

    Esp32s3mini cc1101

    tomkooij/e07-900m10s-esp32s3zero

    Adapter board for e07-900m10s cc1101 and esp32s3 zero module

    13 parts2
  • 2 layers27.9 × 62.4 mmF1 car, the printed circuit board in 3D

    F1 car

    tommasoclini/esp32_f1

    esp32 f1 car

    2 parts2MIT
  • 2 layers69.7 × 40 mm5v to bipolar15v PSU, the printed circuit board in 3D

    5v to bipolar15v PSU

    tommassey/5v_to_bipolar15v_PSU

    Small SMPS to provide ~200mA of +15v/-15v from a single 5v-12v DC supply

    59 parts2
  • 4 layers123.8 × 362.3 mmMidi controller, the printed circuit board in 3D

    Midi controller

    Tommie1236/midi-controller

    lighting focused midi controller

    516 parts2CERN-OHL-W-2.0
  • 2 layers90 × 120 mmNXPCupPlatine, the printed circuit board in 3D

    NXPCupPlatine

    Tomsei/NXPCup-2025

    Code for the NXP-Cup 2025

    55 parts2
  • 2 layers56.8 × 65.5 mmTriangle, the printed circuit board in 3D

    Triangle

    tomverbeure/ball

    LED bal

    65 parts2
  • 4 layers75.9 × 25 mm100base T1-100base TX Media Converter, the printed circuit board in 3D

    100base T1-100base TX Media Converter

    tomy983/100base-T1-100base-TX-Media-Converter

    PCB designet to convert automotive ethernet 100base-T1 to 100base-TX ethernet

    70 parts2MIT
  • 2 layers42.5 × 47.5 mmUSB MicroSD CardReader, the printed circuit board in 3D

    USB MicroSD CardReader

    Tonikiller10000/USB-MicroSD_CardReader

    USB MicroSD Card Reader

    40 parts2
  • 2 layers137.7 × 56.4 mmDivergence meter logic, the printed circuit board in 3D

    Divergence meter logic

    toohka42/Divergence-Meter

    Itron Divergence meter based on Steins;Gate anime series

    73 parts2MIT
  • 2 layers77.7 × 49.9 mmTMC2660 Test, the printed circuit board in 3D

    TMC2660 Test

    TopherMan/TMC2660_TestBoard

    Board to test out Trinamic's TMC2660 stepper driver chip.

    71 parts2GPL-3.0
  • 2 layers38 × 23 mmRS485 Converter, the printed circuit board in 3D

    RS485 Converter

    Toratarou0/Mayudama_RCJ

    RCJ Rescue Maze 2026用 GCS

    10 parts2
  • 2 layers98 × 85 mmCapstone, the printed circuit board in 3D

    Capstone

    torrefic/15A-Motor-Driver

    This H-Bridge PCB uses the Allegro "A4957: Full Bridge MOSFET Driver" as a gate driver for 4 N-MOSFETs. The board is rated for 15A without heatsinks on the MOSFETs, but can sink larger currents depending on the size of…

    37 parts2
  • 2 layers134.3 × 77.7 mmMoteur pap, the printed circuit board in 3D

    Moteur pap

    Totof34/Bobineuse_V3

    The project describes a stand-alone coil winder

    66 parts2
  • 2 layers85.3 × 87.7 mmFourkey, the printed circuit board in 3D

    Fourkey

    trepmal/fourkey

    23 parts2
  • 2 layers225 × 115 mmSQ80 Hardware Programmer, the printed circuit board in 3D

    SQ80 Hardware Programmer

    trevorj71/SQ-80-Parameter-Programmer

    The PG-80 Crosswave Parameter Programmer enables a customized, 32-pot programming workflow for the Ensoniq SQ-80 and ESQ-1, includes a toggle feature to enbale/disable Hidden Waves and a shftt function that extends the…

    59 parts2CC0-1.0
  • 2 layers68.6 × 53.3 mmBeadsEe, the printed circuit board in 3D

    BeadsEe

    trihome/setoros_BeadsEE

    [瀬戸内ROS勉強会] アイロンビーズセッター エンド・エフェクタ関連ソース

    121 parts2MIT
  • 4 layers304.5 × 217.2 mmLatest Full Backplane, the printed circuit board in 3D

    Latest Full Backplane

    Trilobyte-CPU/8-bit-computer

    A DIY 8-bit computer built mostly with discrete logic chips

    478 parts2
  • 2 layers120 × 60 mmMacropad Pico, the printed circuit board in 3D

    Macropad Pico

    TrojanPinata/Macropad-Pico

    A Pico powered 12-key macropad

    32 parts2