Skip to the content
4 layers42 × 42 mmFarfadet stepper driver TMC5130, the printed circuit board in 3D

Farfadet stepper driver TMC5130

tommag/Farfadet_hardware2

KiCad EDA files for Farfadet modular motor system

Size
42 × 42 mm
Copper layers
4
Thickness
1.6 mm
Parts
73
Nets
57
Pads
296
Tracks, vias
1,013, 195
Pours
17
Routed
Yes
KiCad
KiCad 4
Created
18 May 2018
Updated
20 Jun 2018

Overview

Farfadet stepper driver TMC5130 is an open-source printed circuit board by tommag, from the tommag/Farfadet_hardware repository on GitHub. It is a 4-layer board of 42 × 42 mm with 73 parts on 57 nets, routed with 1,013 tracks and 195 vias.

It is built around the TMC5130A-TA, DS2431P+T&R and MIC5365-3.3YD5-TR, with the NCV4264-2ST50, TS3A24159DGSR-TP and D5V0L2B3W among its other parts. Its parts include 20 capacitors, 18 resistors, 9 connectors, 5 ICs and 5 diodes. It belongs with the robots and motor control boards of this library.

Main components

6

README

README.md

Farfadet Hardware

This repo contains KiCad EDA files for the Farfadet modular motor system.

You can check some info on the project here : https://hackaday.io/project/45995-farfadet

Each folder here contains a different hardware project. There is a schematic export in PDF format for each project. You can find the gerber files in the gerber directories. The Bill of Materials and component placement files are in the production directories.

License

This project is Open Source Hardware, licensed under the Creative Commons BY-SA 4.0 license. You can find the full license text here : https://creativecommons.org/licenses/by-sa/4.0/

Parts

73
QtyValueFootprintReferences
60.1uF, 16VCapacitors_SMD:C_0603C2, C4, C5, C10, C15, C16
610kResistors_SMD:R_0603R1, R6, R7, R9, R15, R18
6Fiducial_very_small_moderntom_kicad_lib:Fiducial_very_small_modernFID1, FID2, FID3, FID4, FID5, FID6
40RResistors_SMD:R_0603R8, R10, R13, R16
4470pF, 100VCapacitors_SMD:C_0603C18, C19, C20, C21
4Conn_01x03Connectors_Molex:Molex_PicoBlade_53261-0371_03x1.25mm_AngledJ1, J2, J11, J13
4Mount_HoleMounting_Holes:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
30.1uF, 50VCapacitors_SMD:C_0603C3, C11, C14
20R12 0.5WResistors_SMD:R_1206R4, R5
24.7kResistors_SMD:R_0603R12, R14
24.7uF, 10VCapacitors_SMD:C_0805C7, C8
2D5V0L2B3WTO_SOT_Packages_SMD:SOT-323_SC-70D2, D3
2DNPCapacitors_SMD:C_0603C17, C22
2DNPResistors_SMD:R_0603R11, R17
11.1A, 60VFuse_Holders_and_Fuses:Fuse_SMD2920F1
110RResistors_SMD:R_0603R2
110kPotentiometers:Potentiometer_Trimmer-EVM3ERV1
110uF, 10VCapacitors_SMD:C_0805C6
12.2kResistors_SMD:R_0603R3
1220uF, 50VCapacitors_SMD:CP_Elec_8x10.5C1
122nF, 63VCapacitors_SMD:C_0603C9
12A, 50VDiodes_SMD:D_SMAD1
1BARREL_JACKtom_kicad_lib:JACK_ALIMJ3
1Conn_01x04Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4polJ12
1Conn_02x05_Odd_EvenPin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMDJ6
1Conn_02x10_Odd_EvenPin_Headers:Pin_Header_Straight_2x10_Pitch1.27mm_SMDJ5
1DS2431P+Ttom_kicad_lib:TSOC-6_4x3.8mm_Pitch1.27mmU4
1GreenLEDs:LED_0603D6
1Heatsinktom_kicad_lib:Heatsink_Adhesive_10x10mmHS1
1Jumper_NC_Smalltom_kicad_lib:Solder_Jumper_2_connJP2
1Jumper_NO_Smalltom_kicad_lib:Solder_Jumper_2_openJP3
1MIC5365-3.3YD5TO_SOT_Packages_SMD:SOT-23-5U3
1NCV4264-2ST50TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2U2
1RedLEDs:LED_0603D7
1TEST_1PMeasurement_Points:Measurement_Point_Round-TH_SmallJ7
1TMC5130Atom_kicad_lib:TQFP-48-1EP_7x7mm_Pitch0.5mmU5
1TS3A24159DGSRHousings_SSOP:TSSOP-10_3x3mm_Pitch0.5mmU1

The 72 most common of 73 parts.

More from tommag/Farfadet_hardware

4

Similar boards

  • 2 layers73 × 55 mmDede, the printed circuit board in 3D

    Dede

    ELDAD-hub/Arduino-Uno-PCB

    Arduino Uno REV3 schematic, PCB layout, component analysis and PCB routing guide using Kicad

    47 parts
  • 4 layers100 × 114.9 mmDome center pcb, the printed circuit board in 3D

    Dome center pcb

    daveismith/r2-warpcore-center

    97 parts
  • 2 layers16.5 × 16.5 mmLaptopSupplySpoofer, the printed circuit board in 3D

    LaptopSupplySpoofer

    eldonjakee08/DS2431_1WIRE_EEPROM_DRIVER

    DS2431 1-Wire EEPROM IC driver (STM32F4) for Dell Laptop Supply Spoofer

    3 parts
  • 2 layers33 × 33 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    37 parts33
  • 4 layers99 × 99 mmPrntrBoardV1, the printed circuit board in 3D

    PrntrBoardV1

    ghent360/PrntrBoard

    3D Printer controller board using STM32 NUCLEO-F446 kit TMC2130/2660/2209 drivers

    238 parts24
  • 4 layers80 × 107 mmCentral control board, the printed circuit board in 3D

    Central control board

    EverydayDynamics/bjr

    A Ball Juggling Robot's repository

    99 parts20
  • 2 layers70.9 × 60.8 mmAMFOC01, the printed circuit board in 3D

    AMFOC01

    AstroMeters/AMFOC01

    Open-source USB-C precize motorized telescope focuser with PC and manual control support.

    116 parts3GPL-3.0
  • 2 layers40 × 40 mmPrism pcb, the printed circuit board in 3D

    Prism pcb

    janelia-kicad/prism-pcb

    PCB for each prism in the Voigts Lab honeycomb maze.

    46 parts

Questions

How big is the Farfadet stepper driver TMC5130 PCB?

It measures 42 × 42 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Farfadet stepper driver TMC5130 use?

73 parts, built around the TMC5130A-TA, DS2431P+T&R, MIC5365-3.3YD5-TR and NCV4264-2ST50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Farfadet stepper driver TMC5130 KiCad files?

From the tommag/Farfadet_hardware repository on GitHub, at the commit this page was made from: the board is Farfadet_stepper_driver_TMC5130/Farfadet_stepper_driver_TMC5130.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Farfadet stepper driver TMC5130 design in my own project?

Its repository states no licence, so its author keeps all rights: ask tommag before reusing the design.