Skip to the content
2 layers27.9 × 62.4 mmF1 car, the printed circuit board in 3D

esp32 f1 car

Size
27.9 × 62.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
19
Pads
42
Tracks, vias
62, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Feb 2024
Updated
9 Feb 2025

Overview

F1 car is an open-source printed circuit board by tommasoclini, from the tommasoclini/esp32_f1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 62.4 mm with 2 parts on 19 nets, routed with 62 tracks and 0 vias.

It is built around the ESP32-C3-DEVKITC-02. Its parts include 1 IC and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

esp32_f1

Una mini formula 1 controllata con telecomando e ricevente a 4 canali, con controllo elettronico fatto da esp32-c3

Parts

2
QtyValueFootprintReferences
1Conn_01x12_PinConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_HorizontalJ4
1ESP32-C3-DevKitC-02PCM_Espressif:ESP32-C3-DevKitC-02U1

Similar boards

  • 2 layers121.5 × 60.5 mmRemote, the printed circuit board in 3D

    Remote

    ElektroJonas/DIY-Quadcopter

    This repository contains the control algorithm for a quadcopter drone on an ESP32 as well as electrical schematics and a pcb design.

    24 parts82
  • 2 layers52.2 × 43.6 mmPCB ESP32-C3-DevKitC-02, the printed circuit board in 3D

    PCB ESP32-C3-DevKitC-02

    vives-project-xp/EOMarkers

    Develop small standalone boxes that light up when someone approaches them. The boxes can be fitted with a plexi with Electronics-ICT and a direction indication via an arrow.

    10 parts3
  • 2 layers98.9 × 44.1 mmShuttle Tracker Node, the printed circuit board in 3D

    Shuttle Tracker Node

    wtg/Shuttle-Tracker-Node

    Resources, schematics, and other information for Shuttle Tracker Node

    27 parts3
  • 2 layers49.2 × 40.2 mmPcb 1 new, the printed circuit board in 3D

    Pcb 1 new

    Haridharan-D/eSim_PCB_Design_Project_Files

    Battery-powered ESP32 air quality monitor with a soft power latch, MCP16251 boost converter, and ADS1115 ADC — implemented and simulated in eSim.

    20 partsGPL-3.0
  • 2 layers49.3 × 66.5 mmHeishamon lr pdc, the printed circuit board in 3D

    Heishamon lr pdc

    lrodorigo/heishamon-lr-aquarea-board

    A simple alternative hardware implementation for the great HeishaMon board for communicating with Panasonic heatpumps

    30 parts
  • 2 layers63.3 × 45.5 mmSd bt streamer, the printed circuit board in 3D

    Sd bt streamer

    pluggee/G3X_SD_BT

    SD card streamer

    7 partsGPL-3.0
  • 2 layers121.5 × 60.5 mmRemote, the printed circuit board in 3D

    Remote

    Siggeaxe/DIY_Quadcopter

    Cool Quadcopter UAV built from scratch!

    26 parts
  • 2 layers100 × 80 mmKnock knock esp32, the printed circuit board in 3D

    Knock knock esp32

    Universumgames/knock-knock-esp32

    A knock pattern recognition with esp32

    26 partsCC-BY-4.0

Questions

How big is the F1 car PCB?

It measures 27.9 × 62.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the F1 car use?

2 parts, built around the ESP32-C3-DEVKITC-02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the F1 car KiCad files?

From the tommasoclini/esp32_f1 repository on GitHub, at the commit this page was made from: the board is schematic/kicad/f1_car/f1_car.kicad_pcb and its schematic schematic/kicad/f1_car/f1_car.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the F1 car design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).