2 layers
2 layers
Dmxduino
TomatoPi/5FX-SeedFX2Programable Guitar Pedal Using Eletrosmith Daisy Seed
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 94
- Pads
- 328
- Tracks, vias
- 392, 32
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2021
- Updated
- 7 Dec 2021
Overview
Dmxduino is an open-source printed circuit board by TomatoPi, from the TomatoPi/5FX-SeedFX repository on GitHub. It is a 2-layer board with 127 parts on 94 nets, routed with 392 tracks and 32 vias.
It is built around the LM324. Its parts include 64 resistors, 22 connectors, 16 capacitors, 9 ICs and 9 transistors. It belongs with the audio and music boards of this library.
Main components
1README
README.md5FX-SeedFX
Author
DAGO Esaïe dago.esaie@protonmail.com
Description
Program for DaisySeed used as Guitar Multi-Effect in 5FX-Environment
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 8k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R12, R13, R15, R17, R18, R26, R27, R28, R29, R30, R31, R32, R33, R34 +8 |
| 16 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R7, R8, R9, R16, R19, R20, R21, R22, R41, R42, R43, R44, R45, R46 |
| 9 | 2N2219 | Package_TO_SOT_THT:TO-92 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 8 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R49, R50, R51, R52, R53, R54, R55, R56 |
| 8 | 33n | Capacitor_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C5, C6, C7, C9, C10, C11, C12, C13 |
| 8 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R57, R58, R59, R60, R61, R62, R63, R64 |
| 8 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J8, J9, J10, J11, J14 |
| 8 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J15, J16, J17, J18, J19, J20 |
| 4 | 20k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV2, RV4, RV5, RV6 |
| 4 | 470p | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C8, C14, C15, C16 |
| 4 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11, R23, R24, R25 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U3, U6, U7, U8 |
| 3 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10, R14, R47 |
| 3 | LM324 | Package_DIP:DIP-14_W7.62mm | U1, U5, U9 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1, RV3 |
| 2 | 220p | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C2, C4 |
| 2 | 22n | Capacitor_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C1, C3 |
| 2 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2, U4 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R48 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10_Female | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J25 |
More from TomatoPi/5FX-SeedFX
1Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm
- 2 layers231.1 × 106.7 mm
- 4 layers82.6 × 82.6 mm
- 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers292.1 × 88.3 mm
Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69
Questions
What parts does the Dmxduino use?
127 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dmxduino KiCad files?
From the TomatoPi/5FX-SeedFX repository on GitHub, at the commit this page was made from: the board is hardware/dmxduino/dmxduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dmxduino design in my own project?
Its repository states no licence, so its author keeps all rights: ask TomatoPi before reusing the design.