
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers90 × 100 mm

- 6 layers64 × 45.5 mm

- 4 layers100 × 65 mm

DIYDSPv0.8
TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452
264 parts2GPL-3.0 - 2 layers173 × 139 mm

- 4 layers115 × 76.3 mm

- 2 layers70 × 65 mm

Digital Voltmeter
tejasgolhar2/Digital-Voltmeter
The mini-project which aims to measure the voltage precisely. The voltmeter uses ICL7107 Analog to Digital Converter Microprocessor
31 parts2 - 4 layers97.8 × 51.4 mm

BREAKOUT ATF1508AS
teknoman117/BREAKOUT-ATF1508AS
Breakout and programming board for the PLCC84 versions of the Atmel ATF1504AS and ATF1508AS
23 parts2 - 4 layers57 × 83.6 mm

M68K BUS VOLTAGE CONVERTER
teknoman117/M68K-BUS-VOLTAGE-CONVERTER
A breakout board for the MC68010 which converts the 5V bus to a 3.3V bus you can connect to an FPGA
24 parts2 - 2 layers30 × 100 mm

Moskill
telagod/moskill
MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp
95 parts2 - 2 layers47.1 × 50 mm

TD XPAH hAT
teledatics/TD-XPAH_hAT_template
Kicad 6.x TD-XPAH hAT daughterboard template
6 parts2Apache-2.0 - 2 layers74.6 × 94.5 mm

E1 power dist 2s
Telfair8632/sr71-600
Twin-engine 600 mm RC Blackbird: parametric FreeCAD CAD, a 14-level Pico 2 firmware verification ladder, and a complete QA-evidenced digital build package
41 parts2MIT - 2 layers36 × 25 mm

Mgm210l sensor
temonuv/dormouse
🐭 Dormouse — a coin-cell (CR2032) Zigbee 3.0 temperature + humidity sensor on the Silicon Labs MGM210L (EFR32MG21). Firmware + KiCad hardware + Home Assistant integration.
9 parts2MIT - 2 layers190 × 87.4 mm

Control PCB
TendoPain18/minesweeper-competition-robot-pcb
KiCad-designed Control and Power PCBs for a minesweeper competition robot, featuring an Arduino Mega, motor drivers, IMUs, and an automatic safe-shutdown circuit.
122 parts2 - 4 layers53.5 × 20 mm

- 2 layers65 × 30 mm

WRO-2025-Future Engineers Canada
teostefan/WRO-2025-Future-Engineers-Canada
Main repository for the joint uOttawa-CarletonU team competing in the WRO Future Engineers 2025 competition.
36 parts2 - 2 layers175 × 86 mm

- 2 layers50.8 × 58.4 mm

Protoboard double
tessel/protoboard-module
Design files in KiCad for a DIY hardware module for Tessel.
26 parts2 - 2 layers65 × 56 mm

- 2 layers73.7 × 44.5 mm

Nekonekomimimimi
tetra-mix/nekonekomimimimi
VRChat 内の接触イベントを OSC で受信し、XIAO ESP32C3 が頭部のモーターを PWM で駆動します。PWM のデューティ比で振動の強弱を、6 個のモーターの個別制御で「位置」を表現します。
37 parts2 - 2 layers56 × 20 mm

HallEffectXY Endstop
th0mpy/Voron-Hall_Effect_Endstop
The Hall Effect board allows for contactless homing on the X and Y axis on a Voron 2.When hall sensor reaches close to magnet it produces a voltage. The circuit then compares that with a reference voltage.
28 parts2 - 2 layers138.4 × 51.4 mm

- 2 layers50 × 50 mm

- 2 layers28 × 30.7 mm

- 2 layers173.8 × 173.8 mm
