
Prusa lcd reader
the-ress/prusa-lcd-reader
Connects to Prusa MK3S or similar and sends LCD contents to Home Assistant.

Dmx box is an open-source printed circuit board by the-ress, from the the-ress/dmx-box repository on GitHub. It is a 2-layer board of 138.4 × 51.4 mm with 47 parts on 67 nets, routed with 366 tracks and 92 vias.
It is built around the CH340C, ESP32-WROOM-32U and BCR108. Its parts include 13 resistors, 9 capacitors, 6 diodes, 6 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5, C6, C7 |
| 6 | 330 | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R11, R12, R13 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R6, R7 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C3, C8 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 20K | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | BCR108 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1 uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | ARTNET IN LED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | DMX IN LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | DMX OUT LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | U3 |
| 1 | FLASH | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | PWR LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SN75176AD_In | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SN75176AD_Out | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SW RESET | Tereza_custom:SW_Push_TD-03XA-T | SW2 |
| 1 | SW ZERO | Tereza_custom:SW_Push_TD-03XA-T | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J5 |
| 1 | WIFI AP LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | WIFI CLIENT LED | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | XLR3_In | Connector_Audio:Jack_XLR_Neutrik_NC3MAH_Horizontal | J3 |
| 1 | XLR3_Out | Connector_Audio:Jack_XLR_Neutrik_NC3FAH2_Horizontal | J1 |
| 1 | XLR5_In | Connector_Audio:Jack_XLR_Neutrik_NC5MAH_Horizontal | J4 |
| 1 | XLR5_Out | Connector_Audio:Jack_XLR_Neutrik_NC5FAH_Horizontal | J2 |

the-ress/prusa-lcd-reader
Connects to Prusa MK3S or similar and sends LCD contents to Home Assistant.


SK21/YieldFlo
YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…


lansalot/AOG_Dev
Like AgOpenGPS but not. This version is constantly under development.

Mini-Touch/cursor-oled
Cursor Displayer: ESP32 HP20030-D status panel (PCB + Code)


It measures 138.4 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the CH340C, ESP32-WROOM-32U and BCR108. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the the-ress/dmx-box repository on GitHub, at the commit this page was made from: the board is pcb/dmx-box.kicad_pcb and its schematic pcb/dmx-box.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask the-ress before reusing the design.