
Raise right asym
Dygmalab/raise-right-asym
Licensed under CERN-OHL and distributed as is without any additional warranty or documentation.

The Hall Effect board allows for contactless homing on the X and Y axis on a Voron 2.When hall sensor reaches close to magnet it produces a voltage. The circuit then compares that with a reference voltage.
HallEffectXY Endstop is an open-source printed circuit board by th0mpy, from the th0mpy/Voron-Hall_Effect_Endstop repository on GitHub. It is a 2-layer board of 56 × 20 mm with 28 parts on 14 nets, routed with 111 tracks and 18 vias.
It is built around the SS39ET and LM393. Its parts include 8 capacitors, 7 resistors, 4 ICs, 3 diodes and 1 connector.
XY Endstop
Hall effect endstop board for X and Y axes
The Hall Effect board allows for contactless homing on the X and Y axis on a Voron 2.When hall sensor reaches close to magnet it produces a voltage. The circuit then compares that with a reference voltage. The comparator flips based on threshold set using the trim pots. Please follow following procedure to setup Hall Effect Board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1.00K | HallEffect_XY:R_0805_2012Metric | R1, R3, R5, R9, R10 |
| 5 | 1uF | HallEffect_XY:C_0805_2012Metric | C3, C4, C5, C6, C7 |
| 3 | LED_0805 | HallEffect_XY:LED_0805_2012Metric | D1, D2, D3 |
| 2 | 0.1uF | HallEffect_XY:C_0805_2012Metric | C1, C2 |
| 2 | 10.0K | HallEffect_XY:CT6EP103 | VR1, VR2 |
| 2 | 10.0k | HallEffect_XY:R_0805_2012Metric | R2, R4 |
| 2 | SS39ET | HallEffect_XY:SOT-23 | U1, U2 |
| 1 | 10uF | HallEffect_XY:C_0805_2012Metric | C8 |
| 1 | AP2127K-3.3 | HallEffect_XY:SOT-23-5 | U4 |
| 1 | CONN_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | LM393 | HallEffect_XY:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LOGO | TRA_KiCad_Footprints:VoronLogo_6pt5mm_silkScreen | G*** |
The 26 most common of 28 parts.

Dygmalab/raise-right-asym
Licensed under CERN-OHL and distributed as is without any additional warranty or documentation.


lazerfox74/magnetone
pressure sensitive midi controller with magnetic keys and rgb leds. Running on an STM32F411

moraszk/space-noise-o-meter
Students from Ferenc Mora College for Advanced Studies developed a payload for the MRC-100 satellite. These are the sources of it.

gamaPhy/Freedom
Design files of our hall effect sensor analog keypads



It measures 56 × 20 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the SS39ET and LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the th0mpy/Voron-Hall_Effect_Endstop repository on GitHub, at the commit this page was made from: the board is KiCad/HallEffectXY-Endstop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask th0mpy before reusing the design.