
DIYDSPv0.7
TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

Audio Signal Processor based on ESP32-S3 and ADAU1452
DIYDSPv0.8 is an open-source printed circuit board by TechWizMichael, from the TechWizMichael/MCL-DSP8x8 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 65 mm with 264 parts on 250 nets, routed with 1,501 tracks and 316 vias.
It is built around the AMS1117-1.2. Its parts include 113 capacitors, 85 resistors, 27 ICs, 14 connectors and 10 diodes.
Audio Signal Processor based on ESP32-S3 and ADAU1452.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 100k | Resistor_SMD:R_0402_1005Metric | R22, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42, R43, R46 +29 |
| 42 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C12, C14, C15, C19, C22, C23, C24, C27, C33, C36, C105, C106, C114, C115, C116 +26 |
| 27 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C13, C18, C20, C21, C25, C26, C28, C42, C101, C102, C108, C109, C112, C113 +11 |
| 20 | 1u | Capacitor_SMD:C_0402_1005Metric | C30, C31, C45, C46, C54, C55, C56, C57, C69, C70, C71, C72, C79, C80, C81, C82 +4 |
| 17 | 100 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R14, R19, R20, R25, R74, R81 +1 |
| 17 | ~ | Custom:TLV9062IDR | U8, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U24, U25 +1 |
| 10 | 1k | Resistor_SMD:R_0402_1005Metric | R15, R18, R28, R29, R44, R45, R56, R57, R70, R71 |
| 9 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J6, J7, J8, J9, J10, J11, J12, J13 |
| 7 | 22u | Capacitor_SMD:C_0805_2012Metric | C50, C78, C95, C103, C104, C110, C111 |
| 6 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2, TP4, TP5, TP6, TP7, TP8 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R12, R13, R21, R26, R27 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C16, C17, C34, C35 |
| 4 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C2, C4, C9, C10 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R23, R24, R84, R85 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D7, D8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 220u | Custom:RVT1V221M0810 | C83, C100, C107 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4, J14 |
| 3 | ~ | Custom:TS110916043 | SW1, SW2, SW3 |
| 3 | ~ | Custom:CUS08F30,H3F | D3, D4, D5 |
| 2 | 0.2 | Resistor_SMD:R_2512_6332Metric | R82, R83 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | ~ | Custom:GT-USB-7010ASV | U7, U26 |
| 2 | ~ | Custom:SGM2039A-3.3XXEV8G_TR | U23, U27 |
| 2 | ~ | Custom:AK4619VN | U2, U3 |
| 2 | ~ | Custom:DDZ5V6CSF-7 | D9, D10 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 12.288MHz | Custom:S47SMD12.288M20PF20R30B3 | X1 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C32 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C43 |
| 1 | ADAU1452 | Custom:ADAU1452WBCPZ-RL | U1 |
| 1 | AMS1117-1.2 | Custom:AMS1117-1.2 | U4 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | TP1 |
| 1 | ~ | Custom:ESP32-S3-WROOM-1U-N8 | U5 |
| 1 | ~ | Custom:ADM811TARTZ-REEL7 | U6 |
| 1 | ~ | Custom:SMF20CA | D6 |

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452

TechWizMichael/MCL-DSP8x8
Audio Signal Processor based on ESP32-S3 and ADAU1452


eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers



knewter/kvm-board
An open-source KVM-over-IP device built with a Milk-V Duo S (RISC-V) and ESP32-S3. Remotely control any computer's keyboard, video, and mouse over your network — at the hardware level, independent of the target's OS.

Ne-Se-Chete/CableUndefined-Embedded
AI-powered intelligent breadboard that digitally routes circuit connections using an STM32-controlled multiplexer matrix
It measures 100 × 65 mm and has 4 copper layers, 1.6 mm thick.
264 parts, built around the AMS1117-1.2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TechWizMichael/MCL-DSP8x8 repository on GitHub, at the commit this page was made from: the board is PCB/DIYDSPv0.8/DIYDSPv0.8.kicad_pcb and its schematic PCB/DIYDSPv0.7/DIYDSPv0.7.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).