Skip to the content
2 layers74.6 × 94.5 mmE1 power dist 2s, the printed circuit board in 3D

E1 power dist 2s

Telfair8632/sr71-6002

Twin-engine 600 mm RC Blackbird: parametric FreeCAD CAD, a 14-level Pico 2 firmware verification ladder, and a complete QA-evidenced digital build package

Size
74.6 × 94.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
50
Pads
143
Tracks, vias
529, 162
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Oct 2026
Updated
7 Nov 2026

Overview

E1 power dist 2s is an open-source printed circuit board by Telfair8632, from the Telfair8632/sr71-600 repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.6 × 94.5 mm with 41 parts on 50 nets, routed with 529 tracks and 162 vias.

It is built around the SN74AHCT125N, SN74LVC1G17DBV and 2N3904BU, with the XT30(2+2)PB-M.G.B among its other parts. Its parts include 18 resistors, 13 connectors, 7 capacitors, 2 ICs and 1 transistor. It belongs with the robots and motor control boards and the RP2040 and RP2350 boards of this library.

Main components

4

README

README.md

SR71-600 — A Twin-Engine 600 mm RC Blackbird

A fully independent engineering project: the complete digital build package, firmware, and verification records for a twin-engine radio-controlled aircraft modeled on the SR-71.

As a fully independent engineering project, I am designing and building a twin-engine radio-controlled aircraft modeled on the SR-71, with a 590 mm airframe and a 190.7 g mass budget. I completed the full digital design phase myself: a parametric CAD model, an engineering report with assembly documentation, full-scale manufacturing templates, a costed procurement plan, and automated design-verification checks. I then established a staged verification program for the flight controller, a Raspberry Pi Pico 2 microcontroller, progressing through fourteen defined debug levels. My level-three firmware—heartbeat indication, USB logging, and watchdog recovery—passed a 30-minute automated endurance test, and my level-four inertial-measurement firmware validated the MPU-6050 sensor, logging 200 Hz data for ten continuous minutes without a dropped sample. Next, I will construct motor mounts and a thrust-test bench, calibrate weight and balance, and complete ground checks before a supervised first flight. This project demonstrates my capacity for self-directed learning, systematic execution, and safety-conscious engineering practice.

This repository is the V1.0-P0 digital trial-production release. It is not a flight-certified design.

Status Snapshot

AreaStateEvidence
Parametric CAD modelDone (P0)cad/, qa/cad_checks.json
Engineering report & assembly manualDonedocs/engineering_report.md / .pdf
Manufacturing templates (14 laser-cut DXF, 8 printed STL, 1:1 print sheets)Donecut/, print/, docs/cutting_templates_1to1.pdf
Circuit design (E1)Donedocs/circuit_design.md, electronics/
Firmware level 3 — minimal firmware, 30-min soak + watchdogPASS (2026-10-07)data/test_records.csv row PICO0, firmware/scripts/soak_level3_*.log
Firmware level 4 — MPU-6050 IMU @ 200 Hz, 10-min logPASS (2026-10-13, 1 known issue)data/test_records.csv row IMU0, firmware/scripts/imu_10min.csv
Firmware level 6 — four-channel 50 Hz PWMCompiled (2026-10-19), verification pendingfirmware/level6_pwm/, docs/debug_log_2026-10-19.md
E1 power-distribution PCB (v2 board)Designed, verified, ordered 2026-10-21 (JLC, 5 boards)pcb/e1_power_dist_2s/, docs/log_2026-10-21_e1_pcb.md
Physical build & flight testIn progress — control-board soldering started (milestone B: 5 V/GND buses + capacitors soldered, photo review pending)docs/debug_log_2026-10-19.md, ROADMAP.md

Repository Layout

text
cad/                FreeCAD source model (.FCStd) and STEP export
config/             design.json — the parametric design entry point
cut/                14 laser-cutting DXF templates (foam sheets)
print/              8 3D-printed parts (motor saddles, fin saddles, control horns)
docs/               engineering report, assembly instructions, circuit design,
                    staged debug procedure, debug logs, assessments, learning path
electronics/        wiring diagram (SVG) and netlist (CSV), revision E1
pcb/                E1 power-distribution PCB (v2): KiCad sources, fabrication
                    release package (Gerbers, CPL, BOM), board render
firmware/           Pico 2 (RP2350) firmware: level3_minimal, level4_imu, level6_pwm,
                    bus_doctor, plus the automated acceptance scripts and raw test logs
data/               BOM, procurement budget, test records, measurement records,
                    analysis outputs (JSON) consumed by the generators
src/                Python generators that build the CAD, drawings, PDFs, DXFs,
                    and the offline 3D viewer from config/design.json
qa/                 recorded verification evidence (CAD checks, document checks,
                    viewer checks, run logs)
references/         source links for the reference documents used during design
ROADMAP.md          phase plan, firmware ladder status, next actions, v2 gate
build.ps1           one-command regeneration of the digital package

Start here:

  • Open model_preview.html in a browser — an offline interactive 3D view (drag to rotate; top/side/internal views).
  • Read docs/engineering_report.md — design, calculations, assembly, wiring, testing, and budget.
  • docs/assembly_dimensions.pdf and docs/cutting_templates_1to1.pdf — dimensioned drawings and 1:1 print templates.
  • docs/debug_procedure.md — the 14-level staged verification program.
  • docs/debug_log_2026-10-13.md, docs/debug_log_2026-10-19.md, and docs/log_2026-10-21_e1_pcb.md — troubleshooting retrospective, board bring-up log, and the PCB design/order log.

Design Baseline

  • Envelope 590 mm long (including propeller thickness), 420 mm span, 190 mm motor axis spacing; belly landing.
  • Two micro brushless motors (EX1103 KV11000) driving 2-inch normal/reverse propellers on a 2S battery.
  • Mass budget 190.7 g, including a 20 g unallocated reserve and 16 g removable steel ballast; final ballast is set by measured CG.
  • First-order CG window from the full chine projection: 292.2–298.6 mm from the nose (not an aerodynamically validated result).
  • First-round procurement budget CNY 3420 with CNY 1580 held back for rework and spares; not live pricing.

Reproducing the Build

Requirements: FreeCAD 1.1.3 (its bundled Python 3.11) and a Python 3.12 with ezdxf, shapely, reportlab, pymupdf (or a tools/pydeps folder next to this repo, which the scripts pick up automatically).

powershell
powershell -ExecutionPolicy Bypass -File build.ps1

The design entry points are config/design.json and src/build_cad.py. The FCStd spreadsheet is a readable parameter list; not every solid is driven by it in real time. The scripts contain explicit modeling stations — if you change overall proportions, revise them together and re-run all checks. STLs are at local origins; STEP/FCStd use whole-aircraft coordinates. Equipment in the CAD is envelope geometry; the appearance prototype is not a strict scale replica.

Rebuilds preserve the measured columns in data/bom.csv and all user records in data/test_records.csv.

Firmware rebuild instructions (Pico SDK toolchain): see firmware/README.md.

Safety and Limitations

  • This is a digital trial-production release: hole positions and flight parameters are not measured-and-released values.
  • Blank test records must never be treated as passed; propeller-disc geometry is illustrative, not a manufacturable propeller.
  • The parachute bay is reserved space only — there is no parachute recovery system.
  • Propellers stay off for debug levels 0–7; powered tests only on a fixed bench, never with people in the propeller plane.
  • First flights are conducted by an experienced pilot, at a field with confirmed permission, clearance, and people segregation.

License

MIT — see LICENSE. Third-party reference documents (receiver and motor manuals) used during design are not redistributed in this repository; see references/sources.json for their origins.

Parts

41
QtyValueFootprintReferences
1010kR_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7, R8, R9, R10, R11, R12, R13, R14, R15, R16
4100nFC_Disc_D5.0mm_W2.5mm_P2.50mmC3, C5, C6, C7
4220RR_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4, R5, R6
34k7R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R17, R18
2470uFCP_Radial_D8.0mm_P3.50mmC1, C2
110uFCP_Radial_D5.0mm_P2.50mmC4
11kR_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
12N3904BUTO-92_InlineQ1
1C19268029CONN-TH_XT30PB-MJ1
1ESC-LPinHeader_1x02_P2.54mm_VerticalJ8
1ESC-L_PWRTerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ2
1ESC-RPinHeader_1x02_P2.54mm_VerticalJ9
1ESC-R_PWRTerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ3
1IMUPinHeader_1x05_P2.54mm_VerticalJ11
1PICO_LPinSocket_1x20_P2.54mm_VerticalJ12
1PICO_RPinSocket_1x20_P2.54mm_VerticalJ13
1RP1PinHeader_1x04_P2.54mm_VerticalJ10
1S-LPinHeader_1x03_P2.54mm_VerticalJ6
1S-RPinHeader_1x03_P2.54mm_VerticalJ7
1SN74AHCT125NPDIP-14_L19.3-W6.4-P2.54-LS7.6-BLU1
1SN74LVC1G17DBPinSocket_1x05_P2.54mm_VerticalU2
1UBEC_INTerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ4
1UBEC_OUTTerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ5

Similar boards

  • 2 layers38.1 × 24.1 mmCharging interlock rev a, the printed circuit board in 3D

    Charging interlock rev a

    dsorensen228/sherman

    Desktop robot project with C++ personality and display runtimes, Python hardware services, Pico 2 firmware, and PCB and enclosure design.

    17 parts1
  • 4 layers207 × 78.7 mmRpihw, the printed circuit board in 3D

    Rpihw

    quorten/rpihw

    Raspberry Pi SPI devices board design

    101 partsUnlicense
  • 2 layers125.2 × 61.9 mmPDP-8-Serial IC, the printed circuit board in 3D

    PDP-8-Serial IC

    sierrafoxtrot/PDP-8_Serial_AIO

    A W070 compatible serial interface for the original DEC PDP-8

    61 partsCERN-OHL-W-2.0
  • 4 layers71.8 × 70.7 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ishaansalian/dash-motor-controller

    Motor control PCB for the Dash humanoid robot project.

    79 parts
  • 6 layers72 × 69.5 mmDashMotor48V, the printed circuit board in 3D

    DashMotor48V

    ShangqunYu/Dash48V

    48v version motor controller board

    108 parts
  • 2 layers69 × 13 mmAdaptor, the printed circuit board in 3D

    Adaptor

    williamhaarhoff/foc8313

    Highly compact field oriented controller based on the DRV8313 IC

    22 parts9

Questions

How big is the E1 power dist 2s PCB?

It measures 74.6 × 94.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the E1 power dist 2s use?

41 parts, built around the SN74AHCT125N, SN74LVC1G17DBV, 2N3904BU and XT30(2+2)PB-M.G.B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the E1 power dist 2s KiCad files?

From the Telfair8632/sr71-600 repository on GitHub, at the commit this page was made from: the board is pcb/e1_power_dist_2s/kicad/e1_power_dist_2s.kicad_pcb and its schematic pcb/e1_power_dist_2s/kicad/e1_power_dist_2s.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the E1 power dist 2s design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).