Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers65.3 × 32.8 mmAnavi miracle emitter, the printed circuit board in 3D

    Anavi miracle emitter

    AnaviTechnology/anavi-miracle-emitter

    USB-C WS2812B WiFi controller

    19 parts4
  • 2 layers10.7 × 45.5 mmAnavi traffic lights, the printed circuit board in 3D

    Anavi traffic lights

    AnaviTechnology/anavi-traffic-lights

    Simple add-on board with red, yellow and green LEDs for Raspberry Pi and Arduino

    9 parts4
  • 4 layers457.1 × 308 mmOlivetti M20 L1, the printed circuit board in 3D

    Olivetti M20 L1

    anchorz/Olivetti_M20_L1_schematics

    412 parts4MIT
  • 2 layers228.6 × 109.2 mmPk88, the printed circuit board in 3D

    Pk88

    and3rson/pk88

    Single-board computer based on KM1810VM88 CPU (Ukrainian clone of Intel 8088).

    59 parts4MIT
  • 2 layers144.8 × 94 mmToggle65, the printed circuit board in 3D

    Toggle65

    AndersBNielsen/Toggle6502

    122 parts4
  • 2 layers154.1 × 77.3 mmPneuRev1, the printed circuit board in 3D

    PneuRev1

    AndrewHauck/RDT

    Missouri S&T Rocket Design Team Github Repository

    76 parts4
  • 2 layers19.9 × 41.5 mmKBPY, the printed circuit board in 3D

    KBPY

    andywarburton/KBPY

    a tiny mechanical key switch tester powered by Adafruit QTPY or Seeeduino XIAO (also works great as a single key macropod)

    5 parts4GPL-3.0
  • 2 layers43.2 × 44.5 mmUmic, the printed circuit board in 3D

    Umic

    anfractuosity/wavecatcher

    Wavecatcher - simple board for acoustic cryptanalysis

    34 parts4
  • 2 layers145.4 × 70 mmLab64 vday musicbox, the printed circuit board in 3D

    Lab64 vday musicbox

    angelinakrinos/lab64_vday

    🚀 Enjoy your Valentine's Day Music Box! 🎶❤️

    16 parts4
  • 2 layers56 × 47 mmAgriot sensor, the printed circuit board in 3D

    Agriot sensor

    AngelJMC/agriot-sensor-node

    Open Source hardware/software platform for the rapid and low-cost development of LoRaWAN sensor nodes

    30 parts4GPL-3.0
  • 2 layers95.6 × 95.5 mmPanel, the printed circuit board in 3D

    Panel

    ansemjo/pi2co-usb

    USB to I2C bridge using an Atmel AVR ATtiny85V and even more tiny than I2C-Tiny-USB.

    492 parts4GPL-2.0
  • 2 layersGb board, the printed circuit board in 3D

    Gb board

    anthonydotmoe/vgmplayer

    (Unfinished) Hardware YM2151 VGM Player using RP2040

    37 parts4
  • 4 layers152.9 × 45 mmDdr4-spd breakout, the printed circuit board in 3D

    Ddr4-spd breakout

    antmicro/ddr4-spd-breakout-board

    This repository contains open hardware design files for an experimental breakout board which allows reading the Serial Presence Detect (SPD) data from a 288-pin, JEDEC-compliant DDR4 DIMM module.

    66 parts4Apache-2.0
  • 4 layers394 × 110 mmGpu cluster backplane, the printed circuit board in 3D

    Gpu cluster backplane

    antmicro/gpu-cluster-backplane

    This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

    616 parts4Apache-2.0
  • 4 layers150 × 50 mmIct baseboard, the printed circuit board in 3D

    Ict baseboard

    antmicro/ict-baseboard

    PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host

    277 parts4Apache-2.0
  • 4 layers39.5 × 96.3 mmJetson orin baseboard storage expansion, the printed circuit board in 3D

    Jetson orin baseboard storage expansion

    antmicro/job-storage-expansion

    This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.

    110 parts4Apache-2.0
  • 6 layers28.1 × 10.7 mmQomu board, the printed circuit board in 3D

    Qomu board

    antmicro/qomu-dev-board

    This repository contains open hardware design files for the Qomu development board based on the QuickLogic EOS S3 Sensor Processing Platform . The design files were created by Antmicro in cooperation with QuickLogic .

    69 parts4CC-BY-SA-4.0
  • 2 layers66 × 56.5 mmRaspberry Pi 2m TX, the printed circuit board in 3D

    Raspberry Pi 2m TX

    antonjan/Bacar_Raspberry_tx

    This project is to share the Bacar Raspberry Transmitter 2m Transmitter

    32 parts4
  • 6 layers50 × 75 mmSandflat, the printed circuit board in 3D

    Sandflat

    apfaudio/sandflat

    Lower-cost DSP experimentation host for the SoldierCrab ECP5 SoM

    113 parts4CERN-OHL-S-2.0
  • 6 layers89.4 × 69 mmPi hat, the printed circuit board in 3D

    Pi hat

    ApotheoTech/APT-V01-FMC

    GPIO FMC card, Schematics and PCB

    132 parts4
  • 2 layers46.5 × 70.1 mmLed ring v1, the printed circuit board in 3D

    Led ring v1

    Arcadia-Science/arcadia-phenotypeomat-protocol

    phenotype-o-mat

    22 parts4MIT
  • 2 layers76.2 × 50.8 mmCuterunner-32-64, the printed circuit board in 3D

    Cuterunner-32-64

    ArcaneNibble/cuterunner

    CoolRunner-II Dev Board

    49 parts40BSD
  • 2 layers119 × 27 mmPuya spinner, the printed circuit board in 3D

    Puya spinner

    ArcaneNibble/puya-spinner

    Puya PY32 deliberately-overengineered fidget spinner

    52 parts40BSD