Skip to the content
2 layers10.7 × 45.5 mmAnavi traffic lights, the printed circuit board in 3D

Simple add-on board with red, yellow and green LEDs for Raspberry Pi and Arduino

Size
10.7 × 45.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
7
Pads
17
Tracks, vias
16, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
3 Jun 2018
Updated
3 Jun 2018

Overview

Anavi traffic lights is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-traffic-lights repository on GitHub. It is a 2-layer board of 10.7 × 45.5 mm with 9 parts on 7 nets, routed with 16 tracks and 0 vias.

Its parts include 3 resistors, 3 diodes and 1 connector.

README

README.md

anavi-traffic-lights

Simple add-on board with red, yellow and green LEDs for Raspberry Pi and Arduino

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

9
QtyValueFootprintReferences
3LEDLEDs:LED_D5.0mmD1, D2, D3
3RResistors_SMD:R_0805R1, R2, R3
1CONN_01X04Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mmJ1
1LOGOlogo:anavi-logoG***

The 8 most common of 9 parts.

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Anavi traffic lights PCB?

It measures 10.7 × 45.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi traffic lights use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi traffic lights KiCad files?

From the AnaviTechnology/anavi-traffic-lights repository on GitHub, at the commit this page was made from: the board is anavi-traffic-lights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi traffic lights design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.