2 layers124.9 × 69.6 mm
2 layers154.1 × 77.3 mm
PneuRev1
AndrewHauck/RDT4Missouri S&T Rocket Design Team Github Repository
- Size
- 154.1 × 77.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 81
- Pads
- 246
- Tracks, vias
- 675, 125
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2018
- Updated
- 21 Dec 2020
Overview
PneuRev1 is an open-source printed circuit board by AndrewHauck, from the AndrewHauck/RDT repository on GitHub. It is a 2-layer board of 154.1 × 77.3 mm with 76 parts on 81 nets, routed with 675 tracks and 125 vias.
It is built around the OPA551UA. Its parts include 40 resistors, 13 capacitors, 13 ICs, 3 connectors and 1 diode.
Main components
1README
README.mdMissouri S&T Rocket Design
This is the official repository of the Missouri Rocket Design Team. The purpose of this repository is to allow collaboration on PCB development and software development
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 1k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R11, R12, R13, R14, R15, R16, R20, R21, R22, R23, R24, R25, R29, R30 +10 |
| 13 | 1uF | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 13 | 4k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8, R9, R10, R17, R18, R19, R26, R27, R28, R35, R36, R37, R40 |
| 13 | OPA551 | Housings_DIP:DIP-8_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13 |
| 2 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | TP1, TP2 |
| 1 | 3k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | BATT_IN | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | J2 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
| 1 | PNEU | Pin_Headers:Pin_Header_Straight_1x13_Pitch2.00mm | J3 |
| 1 | SIG_IN | Pin_Headers:Pin_Header_Straight_1x13_Pitch2.00mm | J1 |
The 72 most common of 76 parts.
More from AndrewHauck/RDT
3- 2 layers78.2 × 49.5 mm
- 2 layers
Similar boards
- 2 layers110 × 70 mm
- 2 layers
- 2 layers98.4 × 107.3 mm
- 6 layers160 × 100 mm
CH Card
scular-HCC/DualLaserPDHDriver
Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference
192 parts - 2 layers48 × 107 mm
- 2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers77 × 97 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
76 parts1kGPL-3.0 - 2 layers137.9 × 92.7 mm
ErgoTravel
jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox
76 parts284MIT
Questions
How big is the PneuRev1 PCB?
It measures 154.1 × 77.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PneuRev1 use?
76 parts, built around the OPA551UA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PneuRev1 KiCad files?
From the AndrewHauck/RDT repository on GitHub, at the commit this page was made from: the board is PCB files/Pneumatic control/PneuRev1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PneuRev1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndrewHauck before reusing the design.