Skip to the content
12345678

OPA551UA

Texas InstrumentsExtended

-30V~-4V、4V~30V -40℃~+125℃ 1 102dB 14nV/√Hz@1kHz 15V/us 1mV 200mA 20pA 3MHz 3pA 7mA 7uV/℃ Built-in compensation SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA551UA
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
66 at JLCPCB (C2878170)
Used on
9 open-source boards

Overview

The OPA551UA is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -30V~-4V、4V~30V -40℃~+125℃ 1 102dB 14nV/√Hz@1kHz 15V/us 1mV 200mA 20pA 3MHz 3pA 7mA 7uV/℃ Built-in compensation SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA551U, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 66 are in stock at JLCPCB (part C2878170). 9 open-source boards in 5 repositories on GitHub use it.

Symbol

1V-2-3+67V+8Flag
Amplifier_Operational:OPA551UFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA551UA
PinNameType
1V-Power in
2-Input
3+Input
4V-Passive
5V-Passive
6—Output
7V+Power in
8FlagOutput

Open-source boards using it

9See all 9
  • 2 layers154.1 × 77.3 mmPneuRev1, the printed circuit board in 3D

    PneuRev1

    AndrewHauck/RDT

    Missouri S&T Rocket Design Team Github Repository

    76 parts4
  • 2 layers110 × 70 mmTR Switch, the printed circuit board in 3D

    TR Switch

    menkueclab/TR-Switch

    T/R Switch with LNA for low-field MRI

    85 parts4
  • 4 layers97.5 × 69.8 mmCurrSense 1B, the printed circuit board in 3D

    CurrSense 1B

    ut-ras/rm_electrical-supercap

    57 parts1
  • 2 layers91.4 × 91.4 mmPhd slave, the printed circuit board in 3D

    Phd slave

    IOGS-LEnsE-platforms/labworks

    22 parts
  • 2 layers63 × 95.3 mmPhd slave, the printed circuit board in 3D

    Phd slave

    IOGS-LEnsE-platforms/labworks

    20 parts
  • 6 layers160 × 100 mmCH Card, the printed circuit board in 3D

    CH Card

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    192 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA551UA?

Yes. The symbol is Amplifier_Operational:OPA551U and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA551UA?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA551UA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA551UA?

JLCPCB lists it as part C2878170, with 66 in stock; the sellers' links on this page open their listings.

What can replace the OPA551UA?

Parts like it in the library: the BUF634AID by Texas Instruments, the OPA551UA/2K5 by Texas Instruments, the OPA552UA/2K5 by Texas Instruments and the OPA892D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA551UA?

9 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.