Skip to the content
12345678

BUF634AID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 175uV/℃ 20nV/√Hz@1kHz 210MHz 250mA 250nA 3.75V/ns 36mV 8.5mA ESD protection SOIC-8 Operational Amplifier ROHS

Part id
ti/BUF634AID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
13,865 at JLCPCB (C2058426)
Used on
3 open-source boards

Overview

The BUF634AID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 1 175uV/℃ 20nV/√Hz@1kHz 210MHz 250mA 250nA 3.75V/ns 36mV 8.5mA ESD protection SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Buffer:BUF634AxD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 13,865 are in stock at JLCPCB (part C2058426). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1BW3VIN4V-67V+
Amplifier_Buffer:BUF634AxDFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

14
Supply, absolute maximum
40 V · V+ – V–, absolute maximum total supply · p. 4
Works from
-40 °C · minimum operating ambient temperature · p. 4
Works up to
125 °C · maximum operating ambient temperature · p. 4
Junction, hottest
150 °C · maximum junction temperature · p. 4
Takes working
8.5 mA · typical quiescent current, wide-bandwidth mode, IO = 0 mA · p. 5
Takes working
1.5 mA · typical quiescent current, low-quiescent current mode, IO = 0 · p. 6
Takes at most
12 mA · maximum quiescent supply current, wide-bandwidth mode, IO = 0 mA · p. 5
Gives
250 mA · typical continuous output current magnitude, ±250 mA · p. 5
Current limit
375 mA · typical short-circuit current magnitude, wide-bandwidth mode · p. 5
Current limit
350 mA · typical short-circuit current magnitude, low-quiescent current mode · p. 6
Edge
1.3 ns · typical rise and fall time, wide-bandwidth mode, VO = 200-mV step · p. 5
Junction to air (D (SOIC))
122.9 K/W · junction-to-ambient thermal resistance · p. 4
Junction to case (D (SOIC))
55.2 K/W · junction-to-case top thermal resistance · p. 4
Junction to board (D (SOIC))
68.4 K/W · junction-to-board thermal resistance · p. 4

What it is and has

5
Bandwidth
Pin-selected, 35 MHz to 210 MHz · p. 1
Output current
250 mA · p. 1
Slew rate
3750 V/µs · p. 1
Protection
Internal output current limit · p. 1
Protection
Thermal shutdown · p. 1

Specifications

60
ParameterConditionsAs printedPage
Supply voltage VS = (V+) – (V–)Total supply voltage; equivalent to ±20 Vmax 40 V4
Operating ambient temperature TAmin -40 · max 125 °C4
Junction temperature TJmax 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±3000 Vmax 3000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V4
Supply voltage VS = (V+) – (V–)Symmetric supply rail magnitudes, ± valuesmin 2.25 · typ 15 · max 18 V4
Ambient temperature TALimited by RΘJA and TJ,Max for safe operationmin -40 · typ 25 · max 125 °C4
Junction-to-ambient thermal resistance RθJAD (SOIC), 8 PINStyp 122.9 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)D (SOIC), 8 PINStyp 55.2 °C/W4
Junction-to-board thermal resistance RθJBD (SOIC), 8 PINStyp 68.4 °C/W4
Junction-to-top characterization parameter ΨJTD (SOIC), 8 PINStyp 12.1 °C/W4
Junction-to-board characterization parameter ΨJBD (SOIC), 8 PINStyp 67.2 °C/W4
Bandwidth, –3 dB BWRL = 1 kΩtyp 210 MHz5
Bandwidth, –3 dB BWRL = 100 Ωtyp 200 MHz5
Bandwidth for 0.1-dB flatnessVO = 10 mVPP, RL = 100 Ω, RS = 50 Ωtyp 50 MHz5
Slew rate SRVO = 20-V step, VIN-SR = 4000 V/ustyp 3750 V/us5
Rise and fall timeVO = 200-mV steptyp 1.3 ns5
Settling time to 0.1%VO = 20-V step, VIN-SR = 2500 V/ustyp 90 ns5
Settling time to 1%VO = 20-V step, VIN-SR = 2500 V/ustyp 20 ns5
Voltage noise enf = 1 kHztyp 3.4 nV/√Hz5
Current noise inf = 100 kHztyp 0.85 pA/√Hz5
2nd-harmonic distortion HD2VO = 2 VPP, f = 20 kHztyp -77 dBc5
2nd-harmonic distortion HD2VO = 10 VPP, f = 20 kHztyp -69 dBc5
3rd-harmonic distortion HD3VO = 2 VPP, f = 20 kHztyp -77 dBc5
3rd-harmonic distortion HD3VO = 10 VPP, f = 20 kHztyp -56 dBc5
Input offset voltage VOSTA = 25℃typ 36 · max 65 mV5
Input offset voltage drift(1)TA = –40℃ to 125℃typ 175 uV/℃5
Input bias current IBVIN = 0 Vtyp 0.25 · max 2 uA5
Gain GVO = ±10 V, RL = 1 kΩmin 0.95 · typ 0.99 V/V5
Gain GVO = ±10 V, RL = 100 Ωmin 0.93 · typ 0.95 V/V5
Gain GVO = ±10 V, RL = 67 Ωmin 0.91 · typ 0.93 V/V5
Linear input voltage rangeRL = 1 kΩ, IB < 10 uAmin -13 · max 13 V5
Output headroom to suppliesIO = ±10 mAtyp 1.6 · max 1.8 V5
Output headroom to suppliesIO = ±100 mAtyp 2 · max 2.2 V5
Output headroom to suppliesIO = ±150 mAtyp 2.2 · max 2.5 V5
Current output, continuous IO± current magnitudetyp 250 mA5
Short-circuit current ISC± current magnitudestyp 375 · max 550 mA5
Output impedance ZODC, IO = 10 mAtyp 5 Ω5
Operating voltage range VSSymmetric supply rail magnitudes, ± valuesmin 2.25 · max 18 V5
Quiescent current IQIO = 0 mAtyp 8.5 · max 12 mA5
Power-supply rejection ratio PSRRVS = ±2.25 V to ±18 Vmin 64 · typ 75 dB5
Thermal shutdown temperaturetyp 180 ℃5
Bandwidth, –3 dB BWRL = 1 kΩtyp 35 MHz6
Bandwidth, –3 dB BWRL = 100 Ωtyp 31 MHz6
Bandwidth for 0.1-dB flatnessVO = 10 mVPP, RL = 100 Ω, RS = 50 Ωtyp 2.3 MHz6
Rise and fall timeVO = 200-mV steptyp 4 ns6
Settling time to 0.1%VO = 20-V step, VIN-SR = 2500 V/ustyp 400 ns6
Settling time to 1%VO = 20-V step, VIN-SR = 2500 V/ustyp 90 ns6
Voltage noise enf = 1 kHztyp 8.1 nV/√Hz6
Current noise inf = 10 kHztyp 0.3 pA/√Hz6
2nd-harmonic distortion HD2VO = 2 VPP, f = 20 kHztyp -54 dBc6
2nd-harmonic distortion HD2VO = 10 VPP, f = 20 kHztyp -65 dBc6
3rd-harmonic distortion HD3VO = 2 VPP, f = 20 kHztyp -40 dBc6
3rd-harmonic distortion HD3VO = 10 VPP, f = 20 kHztyp -44 dBc6
Input bias current IBVIN = 0 Vtyp 0.03 · max 0.25 uA6
Short-circuit current ISC± current magnitudestyp 350 · max 550 mA6
Output impedance ZODC, IO = 10 mAtyp 7 Ω6
Quiescent current IQIO = 0typ 1.5 · max 2.3 mA6
Power-supply rejection ratio PSRRVS = ±2.25 V to ±18 Vmin 64 · typ 80 dB6

Pins, by the datasheet

8
1 BW
Bandwidth adjust pin; connect to V– for wide-BW mode or leave floating for low-IQ mode. · p. 3
2 NC
No internal connection. · p. 3
3 VIN
Input. · p. 3
4 V–
Negative power supply. · p. 3
5 NC
No internal connection. · p. 3
6 VO
Output. · p. 3
7 V+
Positive power supply. · p. 3
8 NC
No internal connection. · p. 3

Open-source boards using it

3
  • 4 layers60 × 81 mmMYSTAT, the printed circuit board in 3D

    MYSTAT

    matthew-yates/MYSTAT

    Open source potentiostat/galvanostat hardware design files and required software.

    93 parts9GPL-3.0
  • 4 layers62.8 × 172 mmIntensity pi, the printed circuit board in 3D

    Intensity pi

    JQIamo/PI_wt_hold_for_laser_intensity_lock

    PI controller with integrator hold control for laser intensity lock.

    127 parts1
  • 4 layers152.4 × 101.6 mmBasic pid, the printed circuit board in 3D

    Basic pid

    JQIamo/teach-me-a-pid

    Simplified schematic of a PID controller

    126 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BUF634AID?

Yes. The symbol is Amplifier_Buffer:BUF634AxD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BUF634AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the BUF634AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the BUF634AID?

JLCPCB lists it as part C2058426, with 13,865 in stock; the sellers' links on this page open their listings.

What can replace the BUF634AID?

Parts like it in the library: the BUF634AIDDA by Texas Instruments, the AD8532ARZ-REEL7 by Analog Devices, the LMH6654MAX by Texas Instruments and the TLV4110ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BUF634AID?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.