
BUF634AIDDA
Texas InstrumentsExtended
-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 175uV/℃ 20nV/√Hz@1kHz 210MHz 250mA 250nA 3.75V/ns 36mV 8.5mA ESD protection SOIC-8 Operational Amplifier ROHS
- Part id
- ti/BUF634AIDDA
- Category
- Operational Amplifier
- Package
- SOIC-8
- Pins
- 9
- In stock
- 129 at JLCPCB (C2864582)
- Used on
- 1 open-source board
Overview
The BUF634AIDDA is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 1 175uV/℃ 20nV/√Hz@1kHz 210MHz 250mA 250nA 3.75V/ns 36mV 8.5mA ESD protection SOIC-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Buffer:BUF634AxD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 129 are in stock at JLCPCB (part C2864582). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
16- Supply, least
- 2.25 V · V+, V–, recommended operating rail magnitude min, dual supply · p. 4
- Supply, most
- 18 V · V+, V–, recommended operating rail magnitude max, dual supply · p. 4
- Supply, absolute maximum
- 40 V · VS = (V+) – (V–), absolute max · p. 4
- Works from
- -40 °C · Ambient temperature min · p. 4
- Works up to
- 125 °C · Ambient temperature max, limited by thermal resistance and junction temperature · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 8.5 mA · Quiescent supply current typical, wide-bandwidth mode, IO = 0 mA · p. 5
- Takes working
- 1.5 mA · Quiescent supply current typical, low-quiescent current mode, IO = 0 · p. 6
- Gives
- 250 mA · Continuous output current typical magnitude, source or sink · p. 5
- Current limit
- 375 mA · Short-circuit current typical magnitude, wide-bandwidth mode · p. 5
- Current limit
- 350 mA · Short-circuit current typical magnitude, low-quiescent current mode · p. 6
- Edge
- 1.3 ns · Rise and fall time typical, wide-bandwidth mode, VO = 200-mV step · p. 5
- Edge
- 4 ns · Rise and fall time typical, low-quiescent current mode, VO = 200-mV step · p. 6
- Junction to air (DDA (HSOIC))
- 41.3 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DDA (HSOIC))
- 57.1 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (DDA (HSOIC))
- 17 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
3- Buffer
- Unity-gain, open-loop buffer · p. 3
- Bandwidth
- 35–210 MHz, adjustable · p. 3
- Slew rate
- 3750 V/µs · p. 3
Specifications
74| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VS = (V+) – (V–) | Over operating free-air temperature range; maximum total supply 40 V, equivalent to ±20 V | max 40 V | 4 |
| Operating ambient temperature TA | min -40 · max 125 °C | 4 | |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±3000 V rating | max 3000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101; ±1000 V rating | max 1000 V | 4 |
| Supply voltage VS = (V+) – (V–) | Dual supply; entries printed as ±2.25, ±15 nominal, ±18 V; typ field represents NOM | min 2.25 · typ 15 · max 18 V | 4 |
| Ambient temperature TA | Maximum limited by RΘJA and TJ,Max for safe operation; typ field represents NOM | min -40 · typ 25 · max 125 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | BUF634A, DDA (HSOIC), 8 PINS | typ 41.3 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | BUF634A, DDA (HSOIC), 8 PINS | typ 57.1 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | BUF634A, DDA (HSOIC), 8 PINS | typ 17 °C/W | 4 |
| Junction-to-top characterization parameter ΨJT | BUF634A, DDA (HSOIC), 8 PINS | typ 4.6 °C/W | 4 |
| Junction-to-board characterization parameter ΨJB | BUF634A, DDA (HSOIC), 8 PINS | typ 17 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | BUF634A, DDA (HSOIC), 8 PINS | typ 5.3 °C/W | 4 |
| Bandwidth, –3 dB BW | TA = 25°C, VS = ±15 V, BW connected to V–; RL = 1 kΩ | typ 210 MHz | 5 |
| Bandwidth, –3 dB BW | TA = 25°C, VS = ±15 V, BW connected to V–; RL = 100 Ω | typ 200 MHz | 5 |
| Bandwidth for 0.1-dB flatness | TA = 25°C, VS = ±15 V, BW connected to V–; VO = 10 mVPP, RL = 100 Ω, RS = 50 Ω | typ 50 MHz | 5 |
| Slew rate SR | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 4000 V/us | typ 3750 V/us | 5 |
| Rise and fall time | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 200-mV step | typ 1.3 ns | 5 |
| Settling time to 0.1% | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 2500 V/us | typ 90 ns | 5 |
| Settling time to 1% | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 2500 V/us | typ 20 ns | 5 |
| Voltage noise en | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; f = 1 kHz | typ 3.4 nV/√Hz | 5 |
| Current noise in | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; f = 100 kHz | typ 0.85 pA/√Hz | 5 |
| 2nd-harmonic distortion HD2 | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 2 VPP, f = 20 kHz | typ -77 dBc | 5 |
| 2nd-harmonic distortion HD2 | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 10 VPP, f = 20 kHz | typ -69 dBc | 5 |
| 3rd-harmonic distortion HD3 | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 2 VPP, f = 20 kHz | typ -77 dBc | 5 |
| 3rd-harmonic distortion HD3 | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VO = 10 VPP, f = 20 kHz | typ -56 dBc | 5 |
| Input offset voltage VOS | TA = 25℃, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply | typ 36 · max 65 mV | 5 |
| Input offset voltage drift(1) | TA = –40℃ to 125℃, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; based on characterization of 35 devices | typ 175 uV/℃ | 5 |
| Input bias current IB | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; VIN = 0 V | typ 0.25 · max 2 uA | 5 |
| Gain G | TA = 25°C, VS = ±15 V, BW connected to V–; VO = ±10 V, RL = 1 kΩ | min 0.95 · typ 0.99 V/V | 5 |
| Gain G | TA = 25°C, VS = ±15 V, BW connected to V–; VO = ±10 V, RL = 100 Ω | min 0.93 · typ 0.95 V/V | 5 |
| Gain G | TA = 25°C, VS = ±15 V, BW connected to V–; VO = ±10 V, RL = 67 Ω | min 0.91 · typ 0.93 V/V | 5 |
| Linear input voltage range | TA = 25°C, VS = ±15 V, BW connected to V–; RL = 1 kΩ, IB < 10 uA | min -13 · max 13 V | 5 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; IO = ±10 mA | typ 1.6 · max 1.8 V | 5 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; IO = ±100 mA | typ 2 · max 2.2 V | 5 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; IO = ±150 mA | typ 2.2 · max 2.5 V | 5 |
| Current output, continuous IO | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; typical value printed as ±250 | typ 250 mA | 5 |
| Short-circuit current ISC | TA = 25°C, VS = ±15 V, BW connected to V–; values printed as ±375 typical, ±550 maximum | typ 375 · max 550 mA | 5 |
| Output impedance ZO | TA = 25°C, VS = ±15 V, BW connected to V–, RL = 100 Ω to mid-supply; DC, IO = 10 mA | typ 5 Ω | 5 |
| Operating voltage range VS | Dual supply; values printed as ±2.25 minimum, ±18 maximum; BW connected to V– | min 2.25 · max 18 V | 5 |
| Quiescent current IQ | TA = 25°C, VS = ±15 V, BW connected to V–; IO = 0 mA | typ 8.5 · max 12 mA | 5 |
| Power-supply rejection ratio PSRR | TA = 25°C, BW connected to V–, RL = 100 Ω to mid-supply; VS = ±2.25 V to ±18 V | min 64 · typ 75 dB | 5 |
| Thermal shutdown temperature | VS = ±15 V, BW connected to V– | typ 180 ℃ | 5 |
| Bandwidth, –3 dB BW | TA = 25°C, VS = ±15 V, BW left open; RL = 1 kΩ | typ 35 MHz | 6 |
| Bandwidth, –3 dB BW | TA = 25°C, VS = ±15 V, BW left open; RL = 100 Ω | typ 31 MHz | 6 |
| Bandwidth for 0.1-dB flatness | TA = 25°C, VS = ±15 V, BW left open; VO = 10 mVPP, RL = 100 Ω, RS = 50 Ω | typ 2.3 MHz | 6 |
| Slew rate SR | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 4000 V/us | typ 3750 V/us | 6 |
| Rise and fall time | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 200-mV step | typ 4 ns | 6 |
| Settling time to 0.1% | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 2500 V/us | typ 400 ns | 6 |
| Settling time to 1% | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 20-V step, VIN-SR = 2500 V/us | typ 90 ns | 6 |
| Voltage noise en | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; f = 1 kHz | typ 8.1 nV/√Hz | 6 |
| Current noise in | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; f = 10 kHz | typ 0.3 pA/√Hz | 6 |
| 2nd-harmonic distortion HD2 | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 2 VPP, f = 20 kHz | typ -54 dBc | 6 |
| 2nd-harmonic distortion HD2 | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 10 VPP, f = 20 kHz | typ -65 dBc | 6 |
| 3rd-harmonic distortion HD3 | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 2 VPP, f = 20 kHz | typ -40 dBc | 6 |
| 3rd-harmonic distortion HD3 | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VO = 10 VPP, f = 20 kHz | typ -44 dBc | 6 |
| Input offset voltage VOS | TA = 25℃, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply | typ 36 · max 65 mV | 6 |
| Input offset voltage drift(1) | TA = –40℃ to 125℃, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; based on characterization of 35 devices | typ 175 uV/℃ | 6 |
| Input bias current IB | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; VIN = 0 V | typ 0.03 · max 0.25 uA | 6 |
| Gain G | TA = 25°C, VS = ±15 V, BW left open; VO = ±10 V, RL = 1 kΩ | min 0.95 · typ 0.99 V/V | 6 |
| Gain G | TA = 25°C, VS = ±15 V, BW left open; VO = ±10 V, RL = 100 Ω | min 0.93 · typ 0.95 V/V | 6 |
| Gain G | TA = 25°C, VS = ±15 V, BW left open; VO = ±10 V, RL = 67 Ω | min 0.91 · typ 0.93 V/V | 6 |
| Linear input voltage range | TA = 25°C, VS = ±15 V, BW left open; RL = 1 kΩ, IB < 10 uA | min -13 · max 13 V | 6 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; IO = ±10 mA | typ 1.6 · max 1.8 V | 6 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; IO = ±100 mA | typ 2 · max 2.2 V | 6 |
| Output headroom to supplies | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; IO = ±150 mA | typ 2.2 · max 2.5 V | 6 |
| Current output, continuous IO | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; typical value printed as ±250 | typ 250 mA | 6 |
| Short-circuit current ISC | TA = 25°C, VS = ±15 V, BW left open; values printed as ±350 typical, ±550 maximum | typ 350 · max 550 mA | 6 |
| Output impedance ZO | TA = 25°C, VS = ±15 V, BW left open, RL = 100 Ω to mid-supply; DC, IO = 10 mA | typ 7 Ω | 6 |
| Operating voltage range VS | Dual supply; values printed as ±2.25 minimum, ±18 maximum; BW left open | min 2.25 · max 18 V | 6 |
| Quiescent current IQ | TA = 25°C, VS = ±15 V, BW left open; IO = 0 | typ 1.5 · max 2.3 mA | 6 |
| Power-supply rejection ratio PSRR | TA = 25°C, BW left open, RL = 100 Ω to mid-supply; VS = ±2.25 V to ±18 V | min 64 · typ 80 dB | 6 |
| Thermal shutdown temperature | VS = ±15 V, BW left open | typ 180 ℃ | 6 |
Pins, by the datasheet
9- 1 BW
- Bandwidth adjust: connect to V– for wide-BW mode or leave floating for low-IQ mode. · p. 3
- 2 NC
- No internal connection. · p. 3
- 3 VIN
- Input. · p. 3
- 4 V–
- Negative power supply. · p. 3
- 5 NC
- No internal connection. · p. 3
- 6 VO
- Output. · p. 3
- 7 V+
- Positive power supply. · p. 3
- 8 NC
- No internal connection. · p. 3
- Thermal Pad Thermal Pad
- Backside thermal pad; connect to V– and a heat-spreading plane for low thermal impedance. Footnote also permits leaving it unused with higher thermal impedance. · p. 3
Open-source boards using it
1- 4 layers100 × 100 mm

Parts like it
8BUF634AID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 175uV/℃ 20nV/√Hz@1kHz 210MHz 250mA 250nA 3.75V/ns 36mV 8.5mA ESD protection SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAD8532ARZ-REEL7
SOIC-8-40℃~+85℃ 2 2.7V~6V 20uV/℃ 250mA 25mV 25pA 3MHz 45dB 45nV/√Hz@1kHz 5V/us 5pA 750uA Overvoltage protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational AmplifierLMH6654MAX
SOIC-8-40℃~+85℃ -6V~-2.5V、2.5V~6V 1 12uA 1uA 200MHz 200V/us 280mA 34mV 4.5mA 4.5nV/√Hz@0.1MHz 6uV/℃ 90dB SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV4110ID
SOIC-8-40℃~+125℃ 1 1.5V/us 2.5V~9V 2.7MHz 25pA 3.5mV 320mA 3uV/℃ 500pA 55nV/√Hz@100Hz 68dB 700uA Enable/shutdown function Rail-to-rail output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAD8017ARZ-REEL7
SOIC-8-2.2V~6V -40℃~+85℃ 1.6V/ns 1.9nV/√Hz@10kHz 160MHz 2 270mA 3mV 45uA 5V~12V 63dB 7mA ESD protection SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational AmplifierAD8532AR
SOIC-8-40℃~+85℃ 1pA 2 2.7V~6V 20uV/℃ 250mA 30mV 3MHz 45nV/√Hz@1kHz 47dB 5V/us 5pA 750uA Overvoltage protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational AmplifierLMH6655MAX
SOIC-8-40℃~+85℃ -6V~-2.5V、2.5V~6V 1mV 2 200V/us 260MHz 280mA 300nA 4.5mA 4.5nV/√Hz@0.1MHz 5uA 6uV/℃ 90dB SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierBUF634U
SOIC-8-18V~18V -40℃~+85℃ 1 1.5mA 100uV/℃ 180MHz 250mA 2V/ns 30mV 4nV/√Hz 500nA SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the BUF634AIDDA?
Yes. The symbol is Amplifier_Buffer:BUF634AxD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BUF634AIDDA?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the BUF634AIDDA datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the BUF634AIDDA?
JLCPCB lists it as part C2864582, with 129 in stock; the sellers' links on this page open their listings.
What can replace the BUF634AIDDA?
Parts like it in the library: the BUF634AID by Texas Instruments, the AD8532ARZ-REEL7 by Analog Devices, the LMH6654MAX by Texas Instruments and the TLV4110ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BUF634AIDDA?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.