2 layers39 × 39 mm
Transmitter
will127534/CSI-2-FourLane-HDMI-Extender
A simple MIPI CSI-2 extender with 4-lane support through HDMI cable
18 parts15MIT
6 layers89.4 × 69 mm
Pi hat
ApotheoTech/APT-V01-FMC4GPIO FMC card, Schematics and PCB
- Size
- 89.4 × 69 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 224
- Pads
- 930
- Tracks, vias
- 1,639, 355
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Dec 2023
- Updated
- 22 Dec 2023
Overview
Pi hat is an open-source printed circuit board by ApotheoTech, from the ApotheoTech/APT-V01-FMC repository on GitHub. It is a 6-layer board of 89.4 × 69 mm with 132 parts on 224 nets, routed with 1,639 tracks and 355 vias.
It is built around the USB3310C-CP, TPSM82902SISR and TXS0108ERGYR, with the SI52131-A11AGM, APT1608SGC and SSQ-106-02-G-D-RA among its other parts. Its parts include 52 resistors, 45 capacitors, 12 ICs, 5 connectors and 3 diodes.
Main components
9
USB3310C-CP
QFN-24(4x4)-40℃~+85℃ 1.6V~2V、3V~3.6V、3.1V~5.5V 10mA 480Mbps Transceiver USB 2.0 QFN-24(4x4) USB Converters ROHSMicrochip TechnologyUSB Converters
TPSM82902SISR
LDFN-10-EP(2.8x3)-40℃~+125℃@(TJ) 1 1MHz、2.5MHz 2A 3V~17V 4uA 600mV~5.5V Adjustable Buck Buck Built-in Yes LDFN-10-EP(2.8x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TXS0108ERGYR
VQFN-20-EP(3.7x4.7)-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 8 Auto Direction Detection Bidirectional Push-Pull、Open-drain VQFN-20-EP(3.7x4.7) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
SI52131-A11AGM
QFN-24-EP(4x4)Programmable clock output QFN-24-EP(4x4) Application Specific Clock/Timing ROHSSilicon LabsApplication Specific Clock/Timing
APT1608SGC
0603-40℃~+85℃ 12mcd 150° 2.2V 20mA 565nm 568nm 62.5mW Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
SSQ-106-02-G-D-RA
弯插,P=2.54mm-55℃~+125℃ 12P 2 2.54mm 2.54mm 4.95mm Gold Right Angle 弯插,P=2.54mm Female Headers ROHSSamtecFemale Headers
ASP-134604-01
SMD,P=1.27mm1.27mm 160P 4 Copper alloy Gold Surface Mount,Vertical SMD,P=1.27mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
ECS-2016MV-240-BN-TR3
SMD2016-4P-40℃~+85℃ 1.8V~3.3V 24MHz 7mA ±50ppm SMD2016-4P Crystal Oscillators ROHSECSCrystal Oscillators
TSW-120-23-G-D-LL
插件,P=2.54mm-55℃~+125℃ 2 2.54mm 2.54mm 40P Black Gold Phosphor bronze Through Hole 插件,P=2.54mm Pin Headers ROHSSamtecPin Headers
README
README.mdAPT-V01-FMC
CopyRight 2023 ApotheoTech
Description
The GPIO board is made mostly for enabling GPIO access to any FMC card connector. It has a Raspberry Pi hat compliant connector, and two PMODs that can be used by PMODs that require two adjacent connectors.
It also has an M.2 Key E connector with a ULPI USB 2.0 interface and 1 PCIe TX and RX connection to support Wifi and Bluetooth.
Example Designs
Navigate up to the repository under example designs (TBD link).
Projected Use Cases
Mostly Debugging and providing Wifi accesses to PetaLinux builds
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C17, C18, C19, C20, C21, C22, C23, C25, C26, C27, C28, C29, C30 +16 |
| 24 | 4.7K | Resistor_SMD:R_0402_1005Metric | R1, R13, R15, R16, R19, R20, R21, R22, R23, R24, R25, R33, R37, R38, R39, R44 +8 |
| 9 | 0 | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R7, R8, R9, R10, R17, R18 |
| 7 | DNP | Resistor_SMD:R_0402_1005Metric | R3, R11, R12, R14, R36, R50, R54 |
| 7 | TXS0108ERGYR | apotheotech_lib:TI_VQFN_RGY0020A | U3, U5, U6, U7, U8, U9, U10 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R26, R29, R30, R31, R32 |
| 5 | TestPoint | apotheotech_lib:TestPoint | TP1, TP2, TP3, TP4, TP5 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C14, C16 |
| 2 | 14pF | Capacitor_SMD:C_0402_1005Metric | C5, C9 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C15 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R27, R28 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C43, C44 |
| 2 | APT1608SGC | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | Mounting Hole FMC | apotheotech_lib:MountingHole_2.7mm_M2.5_Pad_2.9mm | H1, H2 |
| 2 | SSQ-106-02-G-D-RA | apotheotech_lib:PMOD | J4, J5 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C45 |
| 1 | 2199119-4 | apotheotech_lib:2199119-4 | J2 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 40.2k | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 76.8k | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | 8.06k | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 9774015151R | apotheotech_lib:9774015151R | H3 |
| 1 | ASP-134604-01 | apotheotech_lib:ASP13460401 | J1 |
| 1 | C_2u2_0402 | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | DCK0006A_N | apotheotech_lib:SN74AXC1T45DCKR | U1 |
| 1 | ECS-2016MV-240-BN-TR3 | apotheotech_lib:ECS-2016MV | Y2 |
| 1 | GRN LED | apotheotech_lib:D_0402_1005Metric | D1 |
| 1 | R_10k_0402 | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | SOP65P640X120-8N | apotheotech_lib:M24C64-DRDW8TP_K | IC1 |
| 1 | SYM_ESD_Small | apotheotech_lib:ApotheoTech_Sym | SYM1 |
| 1 | SYM_ESD_Small | Symbol:CE-Logo_8.5x6mm_SilkScreen | SYM4 |
| 1 | SYM_ESD_Small | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | SYM2 |
| 1 | SYM_ESD_Small | Symbol:ESD-Logo_6.6x6mm_SilkScreen | SYM3 |
| 1 | SYM_ESD_Small | apotheotech_lib:UKCA_Logo_8_5mm | SYM5 |
| 1 | Si52131-A11A | apotheotech_lib:Si52131_QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U2 |
| 1 | TPSM82902SISR | apotheotech_lib:TPSM82902SISR | U11 |
| 1 | TSW-120-23-G-D | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | USB3310C-CP | apotheotech_lib:Microchip_QFN24_4X4 | U4 |
Similar boards
- 4 layers74.3 × 148.8 mm
SeniorDesign
mikemederos/STM32_PCB
STM32F103C8-based PCB used to calculate 3-phase AC impedance to aid in detection of high-impedance faults.
139 parts - 6 layers
- 2 layers52 × 90 mm
- 6 layers86.4 × 54.6 mm
BeagleBone Black.unrouted
The-OpenROAD-Project-Attic/SA-PCB
Annealing-based PCB placement tool
275 parts44BSD-3-Clause - 6 layers42.2 × 61.4 mm
Dap proto board full
tsar-boomba/dap-proto-board-full
The culmination of all of my learning during the Spring '26 semester. All the way from making a simple dev board for the TAD5212 DAC, to making a RP2350 board, and now this. Everything combined on one 6-layer board.
102 parts1 - 4 layers49 × 40 mm
Blackmagic
aeremin/firefly_zephyr
Firmware (Zephyr RTOS / nRF Connect SDK, with Pigweed libraries), custom boards and KiCad hardware projects for a few small nRF52-based devices.
63 parts - 4 layers58 × 104 mm
Questions
How big is the Pi hat PCB?
It measures 89.4 × 69 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Pi hat use?
132 parts, built around the USB3310C-CP, TPSM82902SISR, TXS0108ERGYR and SI52131-A11AGM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pi hat KiCad files?
From the ApotheoTech/APT-V01-FMC repository on GitHub, at the commit this page was made from: the board is pi_hat.kicad_pcb and its schematic FMC_Conn.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pi hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask ApotheoTech before reusing the design.