
Psc daughter brd
NSLS2/zupsc-hw
Zynq UltraScale Power Supply Controller hardware

STM32F103C8-based PCB used to calculate 3-phase AC impedance to aid in detection of high-impedance faults.
SeniorDesign is an open-source printed circuit board by mikemederos, from the mikemederos/STM32_PCB repository on GitHub. It is a 4-layer board of 74.3 × 148.8 mm with 139 parts on 119 nets, routed with 762 tracks and 181 vias.
It is built around the OPA277P, TPSM82902SISR and CD4051BE, with the L7912 and SMAJ12CA among its other parts. Its parts include 66 capacitors, 27 resistors, 21 ICs, 12 diodes and 3 transistors. It belongs with the STM32 boards of this library.
STM32F103C8-based PCB used to calculate 3-phase AC impedance to aid in detection of high-impedance faults.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C11, C12, C13, C14, C20, C22, C24, C25, C26, C27, C28, C29, C30, C31, C32 +15 |
| 23 | 10uf | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17, C18, C38, C39, C40, C41, C42, C43, C44, C45, C46, C47, C48, C49 +7 |
| 11 | OPA277P | OPA277P:DIP794W45P254L959H508Q8 | U7, U8, U10, U11, U12, U13, U14, U15, U18, U19, U20 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R8, R9, R10, R16, R17, R22, R24 |
| 6 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 6 | SMAJ12CA | Diode_SMD:D_SMA | D7, D8, D9, D10, D11, D12 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R5, R7, R15 |
| 4 | 282836-7 | 282836_7:282836-7_TYC | U1, U4, U9, U21 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R23 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R25, R26, R27 |
| 3 | 100u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C66 |
| 3 | 1k5 | Resistor_SMD:R_0603_1608Metric | R18, R19, R20 |
| 3 | 2N2222 | 2N2222:TO127P584H533-3 | Q1, Q2, Q3 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C21, C23 |
| 2 | 10u | Capacitor_SMD:CP_Elec_4x5.4 | C1, C7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C52, C53 |
| 2 | CD4051B | CD4051BM96:D16 | U6, U17 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C51 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 157k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1nf | Capacitor_SMD:C_0603_1608Metric | Css1 |
| 1 | 22uf | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 249k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 270k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 40.2k | Resistor_SMD:R_0603_1608Metric | Rmode1 |
| 1 | L7912 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U16 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TPSM82902SISR | footprints:uSIP11_SIS_TEX | U5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |

NSLS2/zupsc-hw
Zynq UltraScale Power Supply Controller hardware


will127534/CSI-2-FourLane-HDMI-Extender
A simple MIPI CSI-2 extender with 4-lane support through HDMI cable



Operationorange01/Flyback-Driver
driver for high voltage flyback transformer

thejamesrhodes/IMU-Quantisation-research-project
Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.

binaryBeachLLC/tradewind
Tradewind TW-1: solar LoRaWAN field sensor. KiCad 9 board, CadQuery enclosure, RUI3 firmware, simulations, test data, report and datasheet.
It measures 74.3 × 148.8 mm and has 4 copper layers, 1.6 mm thick.
139 parts, built around the OPA277P, TPSM82902SISR, CD4051BE and L7912. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mikemederos/STM32_PCB repository on GitHub, at the commit this page was made from: the board is SeniorDesign.kicad_pcb and its schematic SeniorDesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mikemederos before reusing the design.