Skip to the content
123

L7912

OSENExtended

0℃~+125℃@(Tj) 1 1.2A 12V 200uV 2V@(1A) 35V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
osen/L7912
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220ST
Pins
3
In stock
4 at JLCPCB (C22378643)
Used on
38 open-source boards

Overview

The L7912 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by OSEN in a TO-220ST package with 3 pins. 0℃~+125℃@(Tj) 1 1.2A 12V 200uV 2V@(1A) 35V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:L7912, from KiCad's library) and its footprint (EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-L-1, from EasyEDA), ready for a KiCad board. 4 are in stock at JLCPCB (part C22378643). 38 open-source boards in 32 repositories on GitHub use it.

Symbol

1GND2VI3VO
Regulator_Linear:L7912From KiCad's library

Footprint

123
EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-L-1From EasyEDA

Pinout

3
The pins of the L7912
PinNameType
1GNDPower in
2VIPower in
3VOPower out

Open-source boards using it

38See all 38
  • 2 layers140 × 75 mmAWG, the printed circuit board in 3D

    AWG

    F6ITU/AWG

    poor man's function generator

    81 parts14
  • 2 layers107.9 × 44.5 mmPSU, the printed circuit board in 3D

    PSU

    JacobParent7/Eurorack-PSU

    This repository has the KiCAD design files for a simple +12/-12V Eurorack PSU PCB that does not require a center tapped transformer. It also includes the BOM and CPL to order directly from a PCB Fab such as JLC PCB

    22 parts1
  • 2 layers100 × 40 mmPSU linear reg, the printed circuit board in 3D

    PSU linear reg

    matterwaves/PSU_linear_reg

    26 parts1
  • 2 layers100 × 100 mm2018-03-05-StateVariable2, the printed circuit board in 3D

    2018-03-05-StateVariable2

    promesoft/Kicad-BiquadFilter

    Manually variable stereo filter (BP, HP, LP) in two sections

    125 parts1
  • 2 layers130 × 100 mmAudiovisualiser, the printed circuit board in 3D

    Audiovisualiser

    alimleahat/analog-audio-visualizer-pcb

    Three-band analog audio visualizer built in KiCad for ELEC2101, with PCB files, assembly photos, and bench measurements.

    69 parts
  • 2 layers193 × 160 mmDac circ, the printed circuit board in 3D

    Dac circ

    b3dag/r2r-DAC

    149 parts
  • 2 layers350 × 50 mmPSU, the printed circuit board in 3D

    PSU

    carl-becker/fusion-core

    DIY analog modular synth

    174 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L7912?

Yes. The symbol is Regulator_Linear:L7912 and the footprint EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-L-1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L7912?

TO-220ST, with 3 pins. Its footprint is drawn on this page.

Where is the L7912 datasheet?

OSEN publishes it: the Datasheet link on this page opens it.

Where can I order the L7912?

JLCPCB lists it as part C22378643, with 4 in stock; the sellers' links on this page open their listings.

What can replace the L7912?

Parts like it in the library: the L7812CV-DG by STMicroelectronics, the L7912CV-DG by STMicroelectronics, the L7812CV by STMicroelectronics and the CJ7812 by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L7912?

38 boards in 32 repositories on GitHub; the most starred are listed on this page, with their KiCad files.