

This repository has the KiCAD design files for a simple +12/-12V Eurorack PSU PCB that does not require a center tapped transformer. It also includes the BOM and CPL to order directly from a PCB Fab such as JLC PCB
- Size
- 107.9 × 44.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 6
- Pads
- 42
- Tracks, vias
- 57, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Oct 2023
- Updated
- 17 Jun 2024
Overview
PSU is an open-source printed circuit board by JacobParent7, from the JacobParent7/Eurorack-PSU repository on GitHub. It is a 2-layer board of 107.9 × 44.5 mm with 22 parts on 6 nets, routed with 57 tracks and 2 vias.
It is built around the L7912, L7812 and MJ-3536NG. Its parts include 10 capacitors, 3 diodes, 2 connectors and 1 IC. It belongs with the power boards of this library.
Main components
3L7912
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 200uV 2V@(1A) 35V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMJ-3536NG
插件12V 1A Brass、Copper alloy Tin 插件 Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.mdEurorack-PSU
This repository has the KiCAD design files for a simple +12/-12V Eurorack PSU PCB. It also includes the BOM, CPL, and compressed GERBER files to order directly from a PCB Fab.
Schematic Design
Footprint Design
Design Description
This design utilizes a wall wart AC/AC converter which provides a ~17Vpp AC signal to the board. The board then rectifies this signal into its positive and negative parts and filters the rectified signals to a max ripple of 1V for the inputs of both regulators. This filtered signal is sent to two voltage regulators which have high frequency tantalum compensation capacitors. These regulators directly provide the -12/+12V rails. The LM7812 does not have a built in protection diode so that is why it's included.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C7, C8, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | 4700uf | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C1, C2, C3 |
| 2 | 2000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5, C6 |
| 1 | LOGO | ||
| 1 | 4700uF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C4 |
| 1 | 691137710002 | 2_terminal:CONN2_710002_WRE | J2 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220F-3_Vertical | LM7812 |
| 1 | L7912 | Package_TO_SOT_THT:TO-220F-3_Vertical | U2 |
| 1 | MJ-3536NG | 3.5 mm Connector:MJ-3536NG_CUD | J1 |
Similar boards
- 2 layers140 × 75 mm

- 2 layers100 × 40 mm

- 2 layers100 × 100 mm

2018-03-05-StateVariable2
promesoft/Kicad-BiquadFilter
Manually variable stereo filter (BP, HP, LP) in two sections
125 parts1 - 2 layers72 × 47 mm

- 2 layers130 × 100 mm

Audiovisualiser
alimleahat/analog-audio-visualizer-pcb
Three-band analog audio visualizer built in KiCad for ELEC2101, with PCB files, assembly photos, and bench measurements.
69 parts - 2 layers193 × 160 mm

- 2 layers188.3 × 93 mm

- 2 layers178 × 127 mm

Questions
How big is the PSU PCB?
It measures 107.9 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU use?
22 parts, built around the L7912, L7812 and MJ-3536NG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU KiCad files?
From the JacobParent7/Eurorack-PSU repository on GitHub, at the commit this page was made from: the board is PSU.kicad_pcb and its schematic PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU design in my own project?
Its repository states no licence, so its author keeps all rights: ask JacobParent7 before reusing the design.