Skip to the content

Open-source KiCad boards

3,904 match “SWD”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers48 × 12 mmSwdDebugger, the printed circuit board in 3D

    SwdDebugger

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    44 parts94BSD-3-Clause
  • 4 layers25.8 × 16 mmSwd2usbc, the printed circuit board in 3D

    Swd2usbc

    alvarop/swd2usbc

    Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!

    17 parts29CC0-1.0
  • 4 layers27 × 13 mmSwd2usbc basic, the printed circuit board in 3D

    Swd2usbc basic

    alvarop/swd2usbc

    Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!

    6 parts29CC0-1.0
  • 2 layers20.5 × 11 mmSwd2usbc programmer, the printed circuit board in 3D

    Swd2usbc programmer

    alvarop/swd2usbc

    Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!

    4 parts29CC0-1.0
  • 4 layers23.2 × 27 mmSWDProgrammer, the printed circuit board in 3D

    SWDProgrammer

    tongtongwang86/Revolute

    NRF52833 Based ScrollWheel Key

    37 parts5
  • 2 layers60 × 22 mmSwdprog, the printed circuit board in 3D

    Swdprog

    DistRap/distrap-hw

    DistRap boards

    40 parts4
  • 2 layers34.4 × 24.4 mmSWDAdapter, the printed circuit board in 3D

    SWDAdapter

    synthesissolutions/geeksforkids

    6 parts2
  • 2 layers20 × 50 mmSWDWriter, the printed circuit board in 3D

    SWDWriter

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    4 parts1MIT
  • 2 layers48.3 × 30.5 mmJlink tagConnect adapter v4, the printed circuit board in 3D

    Jlink tagConnect adapter v4

    Fescron/universal-jlink-adapter

    20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well as with a reset button.

    21 parts101
  • 2 layers16 × 19 mmDebugEdge Target Tester, the printed circuit board in 3D

    DebugEdge Target Tester

    debug-edge/DebugEdge

    A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.

    12 parts44
  • 2 layers29 × 12 mmUbmp v1, the printed circuit board in 3D

    Ubmp v1

    korken89/micro-bmp

    A small Black Magic Probe based on the pinout of the STLink V2 support firmware

    25 parts37
  • 2 layers49.8 × 33.3 mmSwindle ch32 revJ, the printed circuit board in 3D

    Swindle ch32 revJ

    mean00/swindle

    A custom version of the blackMagic probe with rust in it

    65 parts22
  • 2 layers21.6 × 27.9 mmJtag wire adapter, the printed circuit board in 3D

    Jtag wire adapter

    islandcontroller/jtag-wire-adapter

    A compact adapter for connecting J-Link debug probes to generic JTAG/SWD targets

    2 parts9CERN-OHL-P-2.0
  • 2 layers38.5 × 27 mmJlinkBreakout, the printed circuit board in 3D

    JlinkBreakout

    Jana-Marie/JlinkBreakout

    Segger Jlink to Tag-Connect and SWD adapter

    11 parts6
  • 2 layers66.2 × 24.1 mmYuricable, the printed circuit board in 3D

    Yuricable

    arag0re/yuricable-pro-max-pcb-kicad

    This is a KiCad Repo for the YuriCable Pro Max PCB to attach to a Flipper Zero

    13 parts5GPL-3.0
  • 4 layers52.7 × 42.5 mmOmniProbe, the printed circuit board in 3D

    OmniProbe

    emertcakir/OmniProbe

    Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

    77 parts4MIT
  • 2 layers39 × 20 mmSODA, the printed circuit board in 3D

    SODA

    ExploreEmbedded/SODA_SWD-Opensource-Debug-Adapter

    SODA is CMSIS Debug Adapter based on LPC11u35

    37 parts3CC0-1.0
  • 2 layers50.8 × 24.1 mmEmbedded debug, the printed circuit board in 3D

    Embedded debug

    stephendpmurphy/embedded-debug

    The embedded debug board can be used to provide access to Target MCU debug UART lines carried on unused traces of a 10pin SWD connector

    23 parts2CC-BY-SA-4.0
  • 2 layers53 × 26 mm1st MSPM0 DEMO PCB, the printed circuit board in 3D

    1st MSPM0 DEMO PCB

    ashfaque-ur-rahman/TI_MSPM0-PCB-Design

    Texas Instruments MSPM0 microcontroller PCB design — KiCad 2-layer board based on Phil's Lab tutorial

    40 parts
  • 6 layers26 × 42.5 mmStdc14-to arm10+8pin, the printed circuit board in 3D

    Stdc14-to arm10+8pin

    edwa-rd/swd-converter

    STDC14 / MIPI10 / ARM10 / 4x2pin conversion board(s)

    13 partsGPL-3.0
  • 2 layers45 × 18 mmJtag connect 6, the printed circuit board in 3D

    Jtag connect 6

    tmolteno/swd-connect

    A simple pogo-pin connector and footprint for connecting SWD debugging

    2 partsGPL-3.0
  • 2 layers50 × 40.1 mmJlink tagConnect adapter, the printed circuit board in 3D

    Jlink tagConnect adapter

    Fescron/universal-jlink-adapter

    20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well as with a reset button.

    14 parts101