Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers60 × 60 mmMinimidi v1 panellized 4x, the printed circuit board in 3D

    Minimidi v1 panellized 4x

    bjonnh/dinoctopus

    A MIDI router and USB interface using a Raspberry PICO (RP2040)

    88 parts6MIT
  • 2 layers21.7 × 10 mmBCR Breakout, the printed circuit board in 3D

    BCR Breakout

    bkw777/BCR_Breakout

    Adapter to get 5vdc from the BCR port on TRS-80 Model 100 and similar computers, and provide it on a standard usb port.

    2 parts6CC-BY-SA-4.0
  • 2 layers147 × 92 mmVan, the printed circuit board in 3D

    Van

    blinken/vandal

    An ESP32-based lighting control system for campervans (or anything else)

    227 parts6GPL-3.0
  • 2 layers50.8 × 53.3 mmSx1280-shield, the printed circuit board in 3D

    Sx1280-shield

    bluekitchen/sx1280-shield

    Breakout board for the SX1280 (Ebyte E28-2G4M12S module) in Arduino form factor

    8 parts6
  • 6 layers48.5 × 50 mmUSB Type C Switch, the printed circuit board in 3D

    USB Type C Switch

    bluetiger9/USB-Type-C-Switch

    2:1 USB 3.x Type-C Switch

    83 parts6MIT
  • 2 layers119.6 × 123.9 mmCpc6128 rom board, the printed circuit board in 3D

    Cpc6128 rom board

    bmpc/amstrad_cpc6128_romboard

    A ROM Board for the Amstrad CPC 6128 capable of loading two expansion ROMs simultaneously from an SD card.

    44 parts6
  • 2 layers145.2 × 92.1 mmAskew kbd, the printed circuit board in 3D

    Askew kbd

    bncpr/askew-kbd

    Custom split keyboard

    67 parts6
  • 2 layers385 × 230 mmMZ80K, the printed circuit board in 3D

    MZ80K

    Board-Folk/Sharp-MZ-80K

    Sharp MZ-80K Replica Public

    254 parts6
  • 4 layers85 × 56 mmV link hat, the printed circuit board in 3D

    V link hat

    BoostedMoose/v-link-hat

    Official repository of the V-Link HAT

    96 parts6
  • 2 layers9 × 9 mmBQStripped, the printed circuit board in 3D

    BQStripped

    bootchk/BQStripped

    Minimal PCB for TI BQ25504 energy harvester

    18 parts6
  • 2 layers62.4 × 57 mmEcho button thing, the printed circuit board in 3D

    Echo button thing

    bootsie123/echo-button-thing

    A PCB replacement for the Echo Button allowing support for Home Assistant through ESPHome

    33 parts6GPL-3.0
  • 2 layers50 × 50 mmBf-034, the printed circuit board in 3D

    Bf-034

    botanicfields/PCB-MBUS-AquesTalk-pico-LSI

    MBUS Module of AquesTalk pico LSI for M5Stack

    56 parts6CC0-1.0
  • 2 layers93 × 93 mmMxmatrix, the printed circuit board in 3D

    Mxmatrix

    brainsmoke/usb_proto

    This repository contains the KiCAD and OpenSCAD files for a USB-C fed protoboard. The protoboard contains a 5V and 3V3 rail. Some extras are also on the board such as a few LEDs and switches.

    340 parts6CC-BY-4.0
  • 2 layers71 × 63 mmPowerSection, the printed circuit board in 3D

    PowerSection

    brettski74/Modular-Solder-Reflow

    Modular designs for a DIY solder reflow hotplate, controller, power supply and more.

    39 parts6
  • 6 layers100 × 100 mmImx8x eps leviathan v2, the printed circuit board in 3D

    Imx8x eps leviathan v2

    BroncoSpace-Lab/scales-hardware

    Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)

    449 parts6
  • 2 layers171.5 × 81.3 mmNanoSpotWelder-3, the printed circuit board in 3D

    NanoSpotWelder-3

    bt-soft/NanoSpotWelder-3

    Pulse counter spot welder with ATmega32P microprocessor

    74 parts6Apache-2.0
  • 2 layers60 × 18 mmUSB I2C, the printed circuit board in 3D

    USB I2C

    burgrp/hw-USB-I2C

    USB-I2C bridge

    26 parts6
  • 2 layers150 × 69 mmProgramming jig r1.0, the printed circuit board in 3D

    Programming jig r1.0

    butterstick-fpga/programming-jig

    A FT232H based production programming jig for the ButterStick

    50 parts6
  • 2 layersVideopaccart, the printed circuit board in 3D

    Videopaccart

    bwack/Videopac-SDcart

    An SD card reader Project for the Videopac G7000

    23 parts6
  • 2 layers49 × 60 mmWifi switch, the printed circuit board in 3D

    Wifi switch

    byggarobot/wifi-switch

    A small board for controlling a load, such as lamps via MQTT over WiFi.

    32 parts6
  • 2 layersM41A, the printed circuit board in 3D

    M41A

    ByPS128/Arduino-Aliens-M41A-Rifle

    Light and Sound module for M41A rifle from Aliens movie, based on Arduino

    22 parts6MIT
  • 2 layers59 × 61.4 mmTMIDI, the printed circuit board in 3D

    TMIDI

    calcium3000/TeensyMIDIInterface

    MIDI interface for the Teensy 3.2 development board

    28 parts6
  • 2 layersSi5351, the printed circuit board in 3D

    Si5351

    calston/x-uhf

    The X-UHF is a modular RF prototyping system for amateur use.

    15 parts6
  • 2 layers195.3 × 76.2 mmQorthoz, the printed circuit board in 3D

    Qorthoz

    calvin-mcd/qorthoz

    ortholinear 10.25u qaz compatible pcb

    105 parts6GPL-3.0