

Videopaccart
An SD card reader Project for the Videopac G7000
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 60
- Pads
- 230
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 21 Apr 2018
- Updated
- 12 May 2018
Overview
Videopaccart is an open-source printed circuit board by bwack, from the bwack/Videopac-SDcart repository on GitHub. It is a 2-layer board with 23 parts on 60 nets.
It is built around the ATMEGA328P-AU, 74LS125DC and 74LS245SC, with the 74LS02PC, 74LVC1G00 and HM62256BLP-7 among its other parts. Its parts include 9 ICs, 6 capacitors, 4 resistors, 3 connectors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LVC1G00
SOT-353-40℃~+105℃ 1 1.65V~5.5V 1.7V、2V 2 2.3V、3.8V 32mA 32mA 450mV、550mV 4ns@5.5V,50pF 4uA 700mV、800mV 74LVC Local shutdown mode NAND Gate SOT-353 Logic Gates ROHSWuxi I-core ElecLogic GatesHM62256BLP-7
DIP28DIP28 New Arrivals ROHSHITUncategorised
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | C | smd:SM0603 | C1, C2, C3, C4, C5, C6 |
| 4 | R | smd:SM0603 | R1, R2, R3, R4 |
| 2 | 74LS02 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2, U7 |
| 1 | 27128 | Housings_DIP:DIP-28_W15.24mm_Socket_LongPads | U3 |
| 1 | 74LS125 | Housings_SSOP:SSOP-14_5.3x6.2mm_Pitch0.65mm | U8 |
| 1 | 74LS245 | Housings_DIP:DIP-20_W7.62mm_LongPads | U9 |
| 1 | 74LVC1G00 | Housings_SSOP:TSOP-5_1.65x3.05mm_Pitch0.95mm | U5 |
| 1 | AP111733 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | ATMEGA328P-AU | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U4 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Angled_2x03_Pitch2.54mm | CON1 |
| 1 | HM62256BLP-7 | SMD_Packages:SOIC-28 | U6 |
| 1 | MICRO_SD_HINGE | armory:MICRO_SD_HINGE_AMP | J2 |
| 1 | Resonator | Crystals:Resonator_SMD-3pin_7.2x3.0mm | Y1 |
| 1 | Videopac_Cart_Edge_Conn | Videopac:videopac-edgecon | J1 |
More from bwack/Videopac-SDcart
1- 2 layers62.2 × 84.5 mm

Similar boards
- 2 layers150.6 × 110.4 mm

AlphaPlus
ARMCoderBR/z80computer-release
A Z80-based computer for nostalgic enthusiasts. With video output!
88 parts5GPL-2.0 - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 4 layers304.8 × 215.9 mm

64 256KB SYSTEM BOARD
kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
197 parts4 - 2 layers233 × 367.7 mm

- 2 layers379.1 × 273.4 mm

NE Delta
frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics
185 parts - 2 layers100 × 100 mm

- 4 layers254 × 137.7 mm

S100 ColorMagic-1.1-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
150 parts1 - 4 layers147.5 × 134 mm

Questions
What parts does the Videopaccart use?
23 parts, built around the ATMEGA328P-AU, 74LS125DC, 74LS245SC and 74LS02PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Videopaccart KiCad files?
From the bwack/Videopac-SDcart repository on GitHub, at the commit this page was made from: the board is kicad/videopaccart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Videopaccart design in my own project?
Its repository states no licence, so its author keeps all rights: ask bwack before reusing the design.