
Retroslop
CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.

Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
64 256KB SYSTEM BOARD is an open-source printed circuit board by kev-ju, from the kev-ju/PC-Retro-MTM repository on GitHub. It is a 4-layer board of 304.8 × 215.9 mm with 197 parts on 378 nets, routed with 12,138 tracks and 636 vias.
It is built around the 74LS384N, 74LS245SC and 74LS373SC, with the 74LS125DC, 74S138PC and MC1741CP1 among its other parts. Its parts include 95 ICs, 44 capacitors, 24 resistors, 12 connectors and 3 switches.

Modern KiCad version of the IBM 5150 system board clone originally created by MTM Scientific, Inc.
Buy the original board (not from these files, not affiliated) here
VCF discussion
mmruzek @ VCF was very kind to open-source the design files of his IBM 5150 system board clone. The project used a version of KiCad from 2012 or so, and was not immediately usable in later KiCad versions. I converted it to KiCad 9 and did enough clean-up and repair to get forward and backward annotation working without issue, along with some small edits listed below. I have not fabricated these files. Use at your own risk.
I added a BOM into the KiCad schematic featuring only US-based retailers where possible. I have not verified these parts, use at your own risk. It may be cheaper to buy the TTL parts direct from ti.com. Do not buy the TTL parts from China, most will be relabeled HC. The RAM and 82XX parts have numerous equivalents, sometimes with quite different part numbers.
If TD1 had its original DIP-14 footprint restored, the DS1000-125 could be used.
EPROMS that work with the 5150 are not common. An adapter can be used as described at MZD, or U28 could possibly be changed to a 27C512 or equivalent by using A13-A15 from the ISA slots and connecting ROM_ADDR_SEL to CE and XMEMR to OE.
IC Socket list:
3 x DIP-8
19 x DIP-14
51 x DIP-16
2 x DIP-18
14 x DIP-20
7 x DIP-24W
1 x DIP-28W
4 x DIP-40
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | RAM_64K_X_1 | 5150:DIP-16__300 | U37, U38, U39, U40, U41, U42, U43, U44, U45, U53, U54, U55, U56, U57, U58, U59 +20 |
| 25 | .047u | 5150:C_254_508_2PIN | C10, C16, C18, C19, C20, C21, C22, C24, C26, C27, C28, C29, C30, C31, C32, C33 +9 |
| 13 | 10u | 5150:C_3PIN | C2, C3, C6, C12, C13, C14, C17, C23, C25, C38, C40, C42, C44 |
| 9 | 27 | 5150:R5 | R13, R14, R15, R16, R17, R18, R19, R20, R21 |
| 7 | MountingHole | 5150:HOLE | H2, H3, H4, H5, H6, H7, H9 |
| 6 | 8K_X_8ROS | 5150:DIP-24__600 | U28, U29, U30, U31, U32, U33 |
| 5 | I/O_CONNECTOR | 5150:62PinEdgeIOConnector | J1, J2, J3, J4, J5 |
| 4 | 18K | 5150:R5 | R1, R3, R4, R5 |
| 4 | 74LS138 | 5150:DIP-16__300 | U46, U47, U48, U66 |
| 4 | 74LS244 | 5150:DIP-20__300 | U15, U16, U17, U23 |
| 4 | 74LS245 | 5150:DIP-20__300 | U8, U12, U13, U14 |
| 4 | 74LS373 | 5150:DIP-20__300 | U7, U9, U10, U18 |
| 3 | 47p | 5150:C_254_508_2PIN | C7, C11, C15 |
| 3 | 74LS04 | 5150:DIP-14__300 | U51, U83, U99 |
| 2 | .01u | 5150:CP8 | C5, C9 |
| 2 | 4.7k | 5150:DIP-16__300 | RN1, RN3 |
| 2 | 510 | 5150:R5 | R22, R25 |
| 2 | 74LS02 | 5150:DIP-14__300 | U27, U50 |
| 2 | 74LS158 | 5150:DIP-16__300 | U62, U79 |
| 2 | 74LS175 | 5150:DIP-16__300 | U26, U98 |
| 2 | 74LS74 | 5150:DIP-14__300 | U67, U96 |
| 2 | 74S08 | 5150:DIP-14__300 | U49, U97 |
| 2 | DIP_SW8 | 5150:DIP-16__300 | SW1, SW2 |
| 2 | MountingHole_Pad | 5150:PLATED_HOLE | H1, H8 |
| 2 | POWER_CON | 5150:POWER_CON | P1, P2 |
| 1 | .047u | 5150:CP8 | C8 |
| 1 | 1200 | 5150:R5 | R7 |
| 1 | 125n | 5150:TD1 | TD1 |
| 1 | 14.31818 | 5150:VC | Y1 |
| 1 | 150 | 5150:R5 | R6 |
| 1 | 180 | 5150:R5 | R11 |
| 1 | 1MEG | 5150:R5 | R2 |
| 1 | 1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 1x4 | 5150:PIN_ARRAY_4x1 | P3 |
| 1 | 20DIP300 | 5150:DIP-20__300 | U100 |
| 1 | 220 | 5150:R5 | R12 |
| 1 | 2x2 | 5150:PIN_ARRAY_2X2 | P4 |
| 1 | 3.9K | 5150:R5 | R9 |
| 1 | 30 OHM | 5150:R5 | R23 |
| 1 | 30 OHM | 5150:DIP-16__300 | RN4 |
| 1 | 33 1/2W | 5150:R5 | R10 |
| 1 | 4.7K | 5150:R5 | R8 |
| 1 | 5-30 | 5150:VR | VC1 |
| 1 | 74LS00 | 5150:DIP-14__300 | U52 |
| 1 | 74LS125 | 5150:DIP-14__300 | U80 |
| 1 | 74LS20 | 5150:DIP-14__300 | U64 |
| 1 | 74LS30 | 5150:DIP-14__300 | U5 |
| 1 | 74LS32 | 5150:DIP-14__300 | U101 |
| 1 | 74LS322 | 5150:DIP-20__300 | U24 |
| 1 | 74LS38 | 5150:DIP-14__300 | U63 |
| 1 | 74LS670 | 5150:DIP-16__300 | U19 |
| 1 | 74S00 | 5150:DIP-14__300 | U81 |
| 1 | 74S10 | 5150:DIP-14__300 | U84 |
| 1 | 74S138 | 5150:DIP-16__300 | U65 |
| 1 | 74S280 | 5150:DIP-14__300 | U94 |
| 1 | 74S74 | 5150:DIP-14__300 | U82 |
| 1 | 75477 | 5150:DIP-8__300 | U95 |
| 1 | 7ns | 5150:TD2 | TD2 |
| 1 | 8.2K | 5150:DIP-16__300 | RN2 |
| 1 | 8087 | 5150:DIP-40__600 | U4 |
| 1 | 8088 | 5150:DIP-40__600 | U3 |
| 1 | 8237A | 5150:DIP-40__600 | U35 |
| 1 | 8253-5 | 5150:DIP-24__600 | U34 |
| 1 | 8255A-5 | 5150:DIP-40__600 | U36 |
| 1 | 8259A | 5150:DIP-28__600 | U2 |
| 1 | 8284A | 5150:DIP-18__300 | U11 |
| 1 | 8288 | 5150:DIP-20__300 | U6 |
| 1 | CASSETTE | 5150:5PINDIN | J6 |
| 1 | DIP_RELAY | 5150:G5V-2DPDT | K1 |
| 1 | KBD | 5150:5PINDIN | J7 |
| 1 | MC1741 | 5150:DIP-8__300 | U1 |
| 1 | RUN | 5150:PIN_ARRAY_2X1 | J8 |
| 1 | TYPE FC | 5150:D5 | D1 |

CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.

ForgottenMachines/Entrex
The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.


Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.

schenkmi/electronic-retro-computing-projects
In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.


lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
It measures 304.8 × 215.9 mm and has 4 copper layers, 1.61 mm thick.
197 parts, built around the 74LS384N, 74LS245SC, 74LS373SC and 74LS125DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kev-ju/PC-Retro-MTM repository on GitHub, at the commit this page was made from: the board is 64_256KB_SYSTEM_BOARD.kicad_pcb and its schematic 64_256KB_SYSTEM_BOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kev-ju before reusing the design.