

Si5351
The X-UHF is a modular RF prototyping system for amateur use.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 13
- Pads
- 45
- Tracks, vias
- 75, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Aug 2018
- Updated
- 6 Sep 2018
Overview
Si5351 is an open-source printed circuit board by calston, from the calston/x-uhf repository on GitHub. It is a 2-layer board with 15 parts on 13 nets, routed with 75 tracks and 10 vias.
It is built around the LD1117-3.3 and SI5351A-B-GT. Its parts include 6 capacitors, 4 connectors, 2 resistors, 2 ICs and 1 crystal.
Main components
2LD1117-3.3
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(1A) 10mA 18V 1A 3.3V 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSI5351A-B-GT
MSOP-10-40℃~+85℃ 1.71V~3.6V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSSilicon LabsClock Generators, PLLs, Frequency Synthesizers
README
README.mdX-UHF
The X-UHF is a modular RF prototyping system for amateur use.
This repo contains STL files and Kicad PCB designs and schematics for different modules.
Testing
This table reflects modules which have actually been built and performance tested.
| Module | PCB tested | Frequency tested | Design tested |
|---|---|---|---|
| SA612 Module | Yes | 50 Mhz | Yes |
| SI5351 | NO | N/A | NO |
| SI5351-BX | YES | 100 Mhz | Yes |
| DRA818 | NO | N/A | NO |
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitors_SMD:C_1210_HandSoldering | C4, C5, C6 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R1, R2 |
| 2 | 1u | Capacitors_SMD:C_1210_HandSoldering | C2, C3 |
| 1 | 10u | Capacitors_SMD:C_1210_HandSoldering | C1 |
| 1 | CLK0 | x-uhf:X-UHF_Interconnect | J2 |
| 1 | CLK1 | x-uhf:X-UHF_Interconnect | J3 |
| 1 | CLK2 | x-uhf:X-UHF_Interconnect | J4 |
| 1 | Crystal | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | LD1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | PWR_IIC | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm_SMD_Pin1Left | J1 |
| 1 | SI5351A | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U2 |
More from calston/x-uhf
4- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 4 layers70.8 × 108 mm

- 2 layers42.4 × 42.4 mm

Nema17 driver
fremsoft/impara-giocando-2
Seconda stagione di impara giocando, laboratorio di robotica e meccatronica
48 partsGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers43.2 × 45.7 mm

- 2 layers100 × 100 mm

- 2 layers75 × 120 mm

- 2 layers67.3 × 74.9 mm

- 2 layers100 × 85 mm

Questions
What parts does the Si5351 use?
15 parts, built around the LD1117-3.3 and SI5351A-B-GT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Si5351 KiCad files?
From the calston/x-uhf repository on GitHub, at the commit this page was made from: the board is si5351_big_xtal/si5351.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Si5351 design in my own project?
Its repository states no licence, so its author keeps all rights: ask calston before reusing the design.