Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers34.5 × 18.5 mmHardware PicoKey, the printed circuit board in 3D

    Hardware PicoKey

    Keyaan-07/PicoKey

    A FIDO2 based passkey using the RP2350A and in it's smallest form factor!

    37 parts10MIT
  • 2 layers13 × 10.2 mmNoise guy, the printed circuit board in 3D

    Noise guy

    kinoshita-lab/noise-guy

    noise generator made by ATTiny10

    16 parts10MIT
  • 4 layers20.2 × 14.8 mmCooldrv, the printed circuit board in 3D

    Cooldrv

    kliment/cooldrv

    drv8825-based stepper driver module

    11 parts10
  • 2 layers90 × 80.6 mmKosmos V3 PCB, the printed circuit board in 3D

    Kosmos V3 PCB

    KonkArLab/KOSMOS

    An underwater observation tool

    34 parts10
  • 2 layers188.9 × 83.9 mmWillis, the printed circuit board in 3D

    Willis

    krikun98/Willis

    Wireless PCB for Bruce the Keyboard

    114 parts10CERN-OHL-P-2.0
  • 6 layers36 × 36 mmNewSkyH7-Air, the printed circuit board in 3D

    NewSkyH7-Air

    kuku-199/NewSky

    159 parts10Apache-2.0
  • 2 layers125.1 × 95.9 mmF68K IO, the printed circuit board in 3D

    F68K IO

    kunichiko/FPGA-X68k-DE0CV-IO

    FPGA X68000 I/O Board for DE0-CV

    74 parts10
  • 2 layers85.7 × 69.9 mmSE30-Grayscale, the printed circuit board in 3D

    SE30-Grayscale

    kvanderlaag/Micront-SE30

    Micron XCEED CRT yoke board for internal greyscale on the Macintosh SE/30

    31 parts10MIT
  • 2 layers72 × 45 mmBrizer ZigBee, the printed circuit board in 3D

    Brizer ZigBee

    kvazimoda24/TionO2-ZigBee

    Ядром проекта является микроконтроллер ATmega328P. Для работы по протоколу ZigBee используется модуль E18-MS1-PCB.

    48 parts10
  • 2 layers76 × 99.9 mmMain pcb, the printed circuit board in 3D

    Main pcb

    kyletyni/mercury

    ESP32 based Micromouse source code and PCB files

    122 parts10
  • 2 layers99 × 40 mmNrom-128, the printed circuit board in 3D

    Nrom-128

    langel/guntner

    24kb NES Shmup

    12 parts10CC-BY-SA-4.0
  • 2 layers34 × 19 mmMgl switch, the printed circuit board in 3D

    Mgl switch

    leggomyfroggo/mgl_switch

    Open source design for a Game Boy Light replacement switch.

    20 parts10
  • 2 layers97 × 117 mmSensorPod Breakout v1.2, the printed circuit board in 3D

    SensorPod Breakout v1.2

    lmnts/PODD

    A tool to understand how buildings perform in terms of occupant comfort. https://lmnarchitects.com/tech-studio/

    125 parts10
  • 2 layers70.1 × 50 mmAmp board, the printed circuit board in 3D

    Amp board

    logical/telepathy

    Telepathy is a wireless eeg device.

    35 parts10
  • 2 layers46.5 × 36.6 mmPartycat, the printed circuit board in 3D

    Partycat

    lukecyca/partycat

    ESP8266 + WS2812 controller: https://talk.vanhack.ca/t/esp8266-ws2812-partycat-controller/5129

    19 parts10
  • 2 layers317.3 × 154.8 mmLCK75, the printed circuit board in 3D

    LCK75

    lyso1/LCK75v3

    The 2nd revision of the LCK75, this is updated to have support for ISO and split backspace layout options

    208 parts10MIT
  • 2 layers40 × 41 mmSx1255 eval, the printed circuit board in 3D

    Sx1255 eval

    M17-Project/SX1255

    Evaluation board for the SX1255 RF transceiver chip

    31 parts10
  • 2 layers130 × 110 mm3D Printer Mainboard STM32, the printed circuit board in 3D

    3D Printer Mainboard STM32

    m47812/Custom-3D-Printer-Controller

    A fully custom 3D Printer controller board based on an stm32f7 controller with TMC2209 stepper drivers

    191 parts10GPL-3.0
  • 2 layers30 × 20.3 mmUsb host dual socket pmod, the printed circuit board in 3D

    Usb host dual socket pmod

    machdyne/usb_host_dual_socket_pmod

    USB Host Dual Socket Pmod™ Compatible Module

    15 parts10
  • 2 layers50 × 20 mmReggie jig, the printed circuit board in 3D

    Reggie jig

    mackieks/reggie

    wide input 3A buck converter module using TPS563203DRLR

    9 parts10
  • 2 layers284 × 128.5 mmXva1-ui, the printed circuit board in 3D

    Xva1-ui

    MacMannes/XVA1-User-Interface

    A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.

    65 parts10GPL-3.0
  • 2 layers355.6 × 213.4 mmConnector validation, the printed circuit board in 3D

    Connector validation

    madworx/robotframework-kicadlibrary

    Robot Framework KiCad Library

    6 parts10MIT
  • 2 layers44.2 × 65.3 mmHx8k demoboard wing, the printed circuit board in 3D

    Hx8k demoboard wing

    maikmerten/hx8k-breakout-extension

    A PCB with SRAM, buttons, LEDs and some pmod-compatible connectors for the Lattice HX8K Breakout Board

    23 parts10MIT
  • 2 layers49.8 × 26.8 mmMw300breakout, the printed circuit board in 3D

    Mw300breakout

    Makerville/knit

    The production-ready WiFi board !

    31 parts10MIT