
Solar MPPT with step up cutoff
m0Ssss/Solar-Squeezer-MPPT-Charger
Simple solar charger using the spv1040 MPPT IC and a DIO6605B 5v out step up

USB Host Dual Socket Pmod™ Compatible Module
Usb host dual socket pmod is an open-source printed circuit board by machdyne, from the machdyne/usb_host_dual_socket_pmod repository on GitHub. It is a 2-layer board of 30 × 20.3 mm with 15 parts on 16 nets, routed with 95 tracks and 3 vias.
It is built around the DIO6605BFN8. Its parts include 8 resistors, 2 capacitors, 1 IC, 1 connector and 1 inductor.
This PMOD is designed for implementing USB host mode directly in an FPGA. It contains the necessary resistors as well as a boost converter to supply 5V to the USB VBUS.

This repo contains PCB layouts, schematics and pinouts.
Find more information on the product page.
| Pin | Signal |
|---|---|
| 1 | USB2_DP (bottom socket) |
| 2 | USB2_DN (bottom socket) |
| 3 | USB1_DP (top socket) |
| 4 | USB1_DN (top socket) |
| 5 | GND |
| 6 | 3V3 |
| 7 | NC |
| 8 | NC |
| 9 | NC |
| 10 | NC |
| 11 | GND |
| 12 | 3V3 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 15K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | 22R | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8 |
| 2 | 10uF | Inductor_SMD:L_0603_1608Metric | C1, C2 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | DIO6605B | Package_DFN_QFN:TDFN-8-1EP_3x2mm_P0.5mm_EP1.4x1.4mm | U1 |
| 1 | LOGO | ld-kicad:ld-kicad | G*** |
| 1 | PMOD-Device-x2-Type-1A-GPIO | pmod-conn_6x2:pmod_pin_array_6x2 | PMOD1 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J1 |

m0Ssss/Solar-Squeezer-MPPT-Charger
Simple solar charger using the spv1040 MPPT IC and a DIO6605B 5v out step up

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 30 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the DIO6605BFN8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the machdyne/usb_host_dual_socket_pmod repository on GitHub, at the commit this page was made from: the board is pcb/usb_host_dual_socket_pmod_v0/usb_host_dual_socket_pmod.kicad_pcb and its schematic pcb/usb_host_dual_socket_pmod_v0/usb_host_dual_socket_pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask machdyne before reusing the design.