
Usb host dual socket pmod
machdyne/usb_host_dual_socket_pmod
USB Host Dual Socket Pmod™ Compatible Module

Simple solar charger using the spv1040 MPPT IC and a DIO6605B 5v out step up
Solar MPPT with step up cutoff is an open-source printed circuit board by m0Ssss, from the m0Ssss/Solar-Squeezer-MPPT-Charger repository on GitHub. It is a 2-layer board of 100 × 42 mm with 48 parts on 19 nets, routed with 242 tracks and 31 vias.
It is built around the DIO6605BFN8 and SPV1040T. Its parts include 9 resistors, 8 capacitors, 2 ICs, 2 diodes and 2 connectors. It belongs with the power boards of this library.
Simple solar charger using the spv1040 MPPT IC and a DIO6605B 5v out step up.
0.3-4.2V in, single cell charger with USB out.
SPV1040 - CC CV charging; over voltage in protection, reverse polarity protection.
DIO6605B - IC disabled at Lithium battery overdischarge threshold using 2.4v zener diode.
Thermistor to disable charging at over temperature.
Using 2x 0.5v solar cells in series: we bought these from Aliexpress (https://www.aliexpress.com/item/1005004078313193.html?spm=a2g0o.productlist.main.1.a8662c1fw73vHF&algo_pvid=46a3f4ab-7525-4bb2-89c4-726baa17c553&algo_exp_id=46a3f4ab-7525-4bb2-89c4-726baa17c553-0&pdp_npi=4%40dis%21SEK%2171.32%2171.32%21%21%216.78%216.78%21%40211b813b17257091241408812e044c%2112000027967400926%21sea%21SE%21929281192%21X&curPageLogUid=nNXq3YYhi0kG&utparam-url=scene%3Asearch%7Cquery_from%3A)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C7, C8 |
| 4 | MountingHole | GaudiLabsFootPrints:MountingHoleM3 | H1, H2, H3, H4 |
| 4 | TestPoint | GaudiLabsFootPrints:SolderPad2mm | TP3, TP4, TP5, TP6 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | Fiducial | GaudiLabsFootPrints:Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | FID1, FID2 |
| 2 | TestPoint | GaudiLabsFootPrints:PAD_SMD_4x2mm | TP1, TP2 |
| 2 | USB_A | GaudiLabsFootPrints:USB A Kycon KUSBX-SMT4-ASFS1N-BTR | J1, J3 |
| 1 | 10 uH power choke | GaudiLabsFootPrints:inductor SDCH1V50204R7MR | L1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 160mO | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 4.7uH | GaudiLabsFootPrints:inductor SDCH1V50204R7MR | L2 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | DIO6605B | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U2 |
| 1 | D_Zener | Diode_SMD_Handsoldering_AKL:D_SOD-123F_Zener | Z3.9V1 |
| 1 | LOGO | GaudiLabsFootPrints:solar-logo | G*** |
| 1 | LOGO | GaudiLabsFootPrints:GaudiLabs_8 | G*** |
| 1 | LOGO | GaudiLabsFootPrints:squeezer-logo | G*** |
| 1 | LOGO | GaudiLabsFootPrints:tux | G*** |
| 1 | LOGO | GaudiLabsFootPrints:sun - | G*** |
| 1 | LOGO | GaudiLabsFootPrints:EnergyField-logo | G*** |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | SPV1040 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U1 |
| 1 | TVS diode 5v | Diode_SMD_Handsoldering_AKL:D_SOD-123F | D1 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | Z2.4V | Diode_SMD_AKL:D_SOD-523 | D2 |
The 47 most common of 48 parts.

machdyne/usb_host_dual_socket_pmod
USB Host Dual Socket Pmod™ Compatible Module


ImperialSpaceSociety/picotracker-Lora
This is the code base and hardware design files for the Lora pico tracker to be flown around the world



mlab-modules/SOLARMINI01
Small low-power MPPT module for photovoltaic cells.
It measures 100 × 42 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the DIO6605BFN8 and SPV1040T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the m0Ssss/Solar-Squeezer-MPPT-Charger repository on GitHub, at the commit this page was made from: the board is solar MPPT with step up cutoff.kicad_pcb and its schematic solar MPPT with step up cutoff.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask m0Ssss before reusing the design.