Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers70.8 × 89.2 mmRgb2ypbpr, the printed circuit board in 3D

    Rgb2ypbpr

    UzixLS/rgb2ypbpr

    RGB to YPbPr converter

    49 parts16MIT
  • 4 layers62.2 × 21.6 mmCounter, the printed circuit board in 3D

    Counter

    Velko/8-bit-CPU

    Homebrew 8-bit CPU

    65 parts16MIT
  • 4 layers120 × 140 mmDDI pcb, the printed circuit board in 3D

    DDI pcb

    vignesh-anand/DCS-F18-DDI-OS

    Open source project to build your own DDI (Digital Display Indicator) for the McDonnell Douglas F/A-18 Hornet in DCS World

    21 parts16
  • 2 layers80 × 80 mmSmartmeter P1 board, the printed circuit board in 3D

    Smartmeter P1 board

    weigu1/SmartyReader

    Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…

    77 parts16GPL-3.0
  • 2 layers128 × 55 mmMotoHUD, the printed circuit board in 3D

    MotoHUD

    wiciu15/motoHUDsch

    KiCad Schematic and PCB for motoHUD (https://github.com/wiciu15/motoHUDini)

    121 parts16
  • 2 layers46.3 × 74.3 mmBL 4C BatteryBreakout, the printed circuit board in 3D

    BL 4C BatteryBreakout

    will127534/BL-5C-Battery-Breakout-Board

    A simple breakout board for BL-5C + 3D Printed holder

    7 parts16
  • 4 layers62.8 × 61.7 mmCf mp3-player, the printed circuit board in 3D

    Cf mp3-player

    will127534/cf-mp3-player

    A simple MP3/WAV/FLAC player using CF card

    119 parts16MIT
  • 2 layers62 × 38 mmGameboy breakout board, the printed circuit board in 3D

    Gameboy breakout board

    willdurand/gameboy-breakout-board

    A GameBoy card slot breakout board.

    8 parts16
  • 2 layers44 × 77 mmUPS Monitor THT, the printed circuit board in 3D

    UPS Monitor THT

    wkcollis1-eng/DIY-LiFePO4-UPS

    12V LiFePO4 UPS for Home Assistant and network gear. First full outage validation (May 6, 2026): 217 min AC-off, 4.18 Ah / 53.3 Wh delivered, graceful shutdown via slope-based cliff_imminent trigger — confirmed…

    22 parts16MIT
  • 2 layers50.8 × 22.9 mmHostess Feather, the printed circuit board in 3D

    Hostess Feather

    wntrblm/Hostess_FeatherWing

    Hostess is a FeatherWing that provides a USB host co-processor. The FeatherWing handles all USB Host related tasks, including enumeration and running the device drivers, and communicates with the primary processor over…

    33 parts16
  • 2 layers25.4 × 25.4 mmSSD1306 SPI Breakout, the printed circuit board in 3D

    SSD1306 SPI Breakout

    WRansohoff/OLED_test_boards

    Repository with KiCAD projects for two boards which provide SPI communication to a 30-pin 128x64 monochrome SSD1306 display panel, and a 23-pin 96x64 multicolor SSD1331 one.

    18 parts16MIT
  • 2 layers41.9 × 44.8 mmClicky SNES Controller Kicad, the printed circuit board in 3D

    Clicky SNES Controller Kicad

    X-Illuminati/SNES-clickety-clacker

    SNES controller PCB with pads for tactile switches and layout optimized for OSH Park

    39 parts16CC-BY-4.0
  • 4 layers78 × 77.2 mmMatterhorn-64-CORE, the printed circuit board in 3D

    Matterhorn-64-CORE

    Xenii1642/Matterhorn-64-CORE

    The world’s smallest fully open-source Nintendo 64 motherboard redesign. Bare essentials, full power!

    177 parts16CERN-OHL-S-2.0
  • 2 layers20.9 × 27.7 mmT Echo Lite Core V1.0, the printed circuit board in 3D

    T Echo Lite Core V1.0

    Xinyuan-LilyGO/T-Echo-Lite

    T-Echo-Lite is a lightweight version based on T-Echo, featuring a smaller volume and lower power consumption design compared to T-Echo.

    3 parts16
  • 2 layers279.5 × 95 mmKVL, the printed circuit board in 3D

    KVL

    yamamo2shun1/C4NDY

    USB Audio and HID composite device project based on STM32G491.

    254 parts16MIT
  • 2 layers100 × 100 mmMZ2000 SD, the printed circuit board in 3D

    MZ2000 SD

    yanataka60/MZ-2000_SD

    MZ-80B、MZ-2000、MZ-2200でSD-CARDからのアプリケーション起動、BASICなどのアプリケーションからSD-CARDへのロード、セーブを実現するものです。

    30 parts16MIT
  • 2 layers210 × 120 mmFlatbox rev5, the printed circuit board in 3D

    Flatbox rev5

    yawn156/flatboxP

    Low profile hitbox-layout fightstick

    40 parts16
  • 2 layers100 × 100 mmLcr 2, the printed circuit board in 3D

    Lcr 2

    yjmwxwx/stm32asm

    256 parts16GPL-3.0
  • 2 layers100 × 100 mm1551-III Pico, the printed circuit board in 3D

    1551-III Pico

    ytmytm/1551-rePico

    Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

    80 parts16GPL-3.0
  • 2 layers72.9 × 25.4 mmBeepSensors, the printed circuit board in 3D

    BeepSensors

    57Bravo/BeepSensors

    GPS, IMU, MAG, BARO, and Buzzer for the BeepBerry

    19 parts15
  • 4 layers46 × 110 mmAware01 h7 rev2 0, the printed circuit board in 3D

    Aware01 h7 rev2 0

    95lux/aware01

    Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.

    158 parts15GPL-3.0
  • 4 layers100 × 74 mmBeaglelogic standalone, the printed circuit board in 3D

    Beaglelogic standalone

    abhishek-kakkar/beaglelogic-standalone

    BeagleLogic implemented as a turnkey and standalone logic analyzer

    260 parts15
  • 2 layersKi Test, the printed circuit board in 3D

    Ki Test

    AdrianWest/Bakery

    If Bakery has helped you in any way please consider buying me a coffee

    32 parts15GPL-3.0