
Smartyreader
weigu1/SmartyReader
Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…

Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…
Smartmeter P1 board is an open-source printed circuit board by weigu1, from the weigu1/SmartyReader repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 80 mm with 77 parts on 61 nets, routed with 641 tracks and 0 vias.
It is built around the WEMOS D1 MINI. Its parts include 26 resistors, 18 connectors, 11 transistors and 7 capacitors. It belongs with the ESP8266 and NXP (LPC, Kinetis, i.MX RT) boards of this library.

Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom (T210-D).
As it seems the same smartmeters are deployed in Sweden, parts of Austria and the Netherlands.
These smartmeters have a user port that delivers 10 second data (RJ12 connector under the green lid). The P1 data output communication protocol and format is specified in the Dutch Smart Meter Requirements v5.0.2 . The solution deployed in Luxembourg includes an additional security layer standard that is conform to the IDIS package 2.0 requirement. The encryption layer is based on DLMS security suite 0 algorithm: AES128-GCM. More information can be found in this document.
The Smartyreader is a simple board designed with KiCAD and decrypting the smartmeter data with an ESP8266 (Lolin D1 mini pro). The data is then published over MQTT via WiFi or Ethernet. A new version allows also to use LoRa or LoRaWAN.
For infos from the newest software look here: https://github.com/weigu1/SmartyReader/tree/main/Arduino/SmartyReader_P1_WiFi_Ethernet.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 |
| 7 | 10k | weigu:W0805 | R11, R12, R13, R14, R15, R25, R26 |
| 6 | 15k | weigu:W0805 | R16, R17, R18, R19, R20, R24 |
| 5 | 1k | weigu:W0805 | R6, R7, R8, R9, R10 |
| 5 | 220 | weigu:W0805 | R1, R2, R3, R4, R5 |
| 5 | C1 | weigu:WPin_3mm | AD1, AD1, AD1, AD1, AD1 |
| 5 | Jump | weigu:WSIL2 | JP1, JP2, JP3, JP4, JP5 |
| 4 | 100nF | weigu:W0805 | C1, C2, C3, C7 |
| 2 | 1.8k | weigu:W0805 | R21, R22 |
| 2 | 10uF | weigu:W1206 | C4, C5 |
| 1 | 0 | weigu:W1206 | R23 |
| 1 | 100pF | weigu:W0805 | C6 |
| 1 | 3.3V_H1 | weigu:WSIL2_SL | J10 |
| 1 | 5V_H1 | weigu:WSIL2_SL | J11 |
| 1 | 5V_H2 | weigu:WSIL2_SL | J12 |
| 1 | BAT+ | weigu:WSIL1 | J15 |
| 1 | Exp_Header1 | weigu:WSIL2_SL | J14 |
| 1 | Exp_Header2 | weigu:WSIL4_SL | J7 |
| 1 | Exp_Header3 | weigu:WSIL7_SL | J8 |
| 1 | Exp_Header4 | weigu:WSIL7_SL | J9 |
| 1 | GND_H3 | weigu:WSIL2 | J17 |
| 1 | I2C_Header | weigu:WSIL4_SL | J13 |
| 1 | RX6 | weigu:WSIL1 | J16 |
| 1 | Smartmeter1 | weigu:WRJ12 | J1 |
| 1 | Smartmeter2 | weigu:WRJ12 | J2 |
| 1 | Smartmeter3 | weigu:WRJ12 | J3 |
| 1 | Smartmeter4 | weigu:WRJ12 | J4 |
| 1 | Smartmeter5 | weigu:WRJ12 | J5 |
| 1 | TEENSY36 | weigu:WTEENSY36 | T1 |
| 1 | W5500_2x5 | weigu:WW5500 | J6 |
| 1 | WBATTERY | weigu:WBAT | BT1 |
| 1 | WEMOS_D1_mini | weigu:WWEMOSD1 | W1 |
| 1 | rainwater | weigu:WSIL4 | J18 |
The 75 most common of 77 parts.

weigu1/SmartyReader
Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…

weigu1/SmartyReader
Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…

weigu1/SmartyReader
Because of the EU Energy Efficiency Directive from 2012 the gas and electricity Distribution System Operators (DSO) in Luxembourg replaced there gas and energy meters with smartmeters (named smarty :() from Sagemcom…

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the weigu1/SmartyReader repository on GitHub, at the commit this page was made from: the board is KiCAD/smartyreader5/smartmeter_P1_board.kicad_pcb and its schematic KiCAD/smartyreader_v2_2_lora/smartyreader_ng_lora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).