
SSD1331 SPI Breakout
WRansohoff/OLED_test_boards
Repository with KiCAD projects for two boards which provide SPI communication to a 30-pin 128x64 monochrome SSD1306 display panel, and a 23-pin 96x64 multicolor SSD1331 one.

Repository with KiCAD projects for two boards which provide SPI communication to a 30-pin 128x64 monochrome SSD1306 display panel, and a 23-pin 96x64 multicolor SSD1331 one.
SSD1306 SPI Breakout is an open-source printed circuit board by WRansohoff, from the WRansohoff/OLED_test_boards repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.4 × 25.4 mm with 18 parts on 19 nets, routed with 93 tracks and 14 vias.
Its parts include 9 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
These are KiCAD projects with schematics and footprints for 128x64 SSD1306 monochrome OLED screens and 96x64 SSD1331 multicolor ones. Both panels are roughly 1" diagonally, and the boards are designed for SPI communication.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C2, C7, C8 |
| 2 | 1u | Capacitors_SMD:C_0805_HandSoldering | C5, C6 |
| 2 | Pump | Capacitors_SMD:C_0805_HandSoldering | C3, C4 |
| 1 | 10u | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_HandSoldering | C1 |
| 1 | 2.2u | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | 4K7 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | <.5Vf | Diodes_SMD:SOD-123 | D1 |
| 1 | AP2210 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | U1 |
| 1 | Conn | Pin_Headers:Pin_Header_Straight_1x07 | P1 |
| 1 | ESD | Diodes_SMD:SOD-123 | D2 |
| 1 | IREF | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | Jumper_NC_Small | Resistors_SMD:R_0805_HandSoldering | JP2 |
| 1 | Jumper_NO_Small | Resistors_SMD:R_0805_HandSoldering | JP1 |
| 1 | SSD1306_ribbon | ribbon_connectors:SSD1306_ribbon | P2 |

WRansohoff/OLED_test_boards
Repository with KiCAD projects for two boards which provide SPI communication to a 30-pin 128x64 monochrome SSD1306 display panel, and a 23-pin 96x64 multicolor SSD1331 one.


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.


Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WRansohoff/OLED_test_boards repository on GitHub, at the commit this page was made from: the board is SSD1306_SPI/SSD1306_SPI_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).