4 layers56 × 43 mm
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers49.9 × 34 mm
Esp12f si7021-v1.2
amadeuspzs/esp8266-temperature-humidity
Low power MQTT temperature and humidity sensor
25 parts24 - 2 layers50.5 × 86.3 mm
- 2 layers64.6 × 87.1 mm
- 2 layers100 × 100 mm
- 4 layers43 × 43 mm
Gmsl serializer
antmicro/gmsl-serializer
Experimental GMSL2 serializer board compatible with Antmicro MIPI CSI video accessories
118 parts24Apache-2.0 - 2 layers127.9 × 82.9 mm
- 4 layers100 × 100 mm
- 2 layers108 × 64.1 mm
ISA POST Card v5.1
ausandavno/ISA_POST_Card_v5
A plug-in diagnostic card that displays Power On Self Test (POST) codes on an 8-bit ISA data bus. Tested for use with Micro8088 and Xi8088 systems.
40 parts24 - 2 layers99.7 × 64.1 mm
Malt
b3rendsh/msxdos2s
MSXDOS smaller 16K/32K rom with IDE interface drivers and enhancements
35 parts24 - 2 layers43.5 × 33.9 mm
Adapter
Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.
26 parts24 - 2 layers342.9 × 109.6 mm
- 8 layers180.6 × 148.5 mm
AMC FMC Carrier PcbDoc
BerkeleyLab/Marble-Mini
"Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE
931 parts24 - 2 layers280 × 29.3 mm
Mcu eight
biappi/muScribble
An hardware USB Scribble Strip that supports the Mackie Control Protocol
9 parts24 - 2 layers160.3 × 25.5 mm
N64rgb v3.prod
borti4938/n64rgb_flex
This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.
60 parts24GPL-3.0 - 2 layers273.8 × 109 mm
TrueStrike42
byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.
167 parts24 - 2 layers86.4 × 96.5 mm
MicroDroplet
CGrassin/microdroplet_electrowetting
µDroplet is a platform to experiment with electrowetting with an 8×8 array of electrodes.
104 parts24MIT - 2 layers65 × 50 mm
- 4 layers42 × 83.9 mm
StratoSoar MK2.2
crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
116 parts24 - 4 layers100 × 52.3 mm
- 2 layers200 × 81 mm
- 4 layers70 × 70 mm
CloudSmoker ver2f
cwgstreet/cloudSmoker
ESP32 wifi enabled quad temperature probe device to monitor bbq meat / pit temperatures with wireless cloud data logging for remote monitoring and push alert notifications
115 parts24 - 4 layers44 × 48.1 mm
- 2 layers319.1 × 76.2 mm
