

Mcu eight
An hardware USB Scribble Strip that supports the Mackie Control Protocol
- Size
- 280 × 29.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 40
- Pads
- 96
- Tracks, vias
- 232, 48
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Oct 2019
- Updated
- 9 Oct 2024
Overview
Mcu eight is an open-source printed circuit board by biappi, from the biappi/muScribble repository on GitHub. It is a 2-layer board of 280 × 29.3 mm with 9 parts on 40 nets, routed with 232 tracks and 48 vias.
Its parts include 8 switches and 1 IC. It belongs with the audio and music boards and the STM32 boards of this library.
README
README.mdµScribble
An hardware USB Scribble Strip that supports the Mackie Control Protocol.

Introduction
µScribble is an USB Midi gadget designed to be a companion to inexpensive faderboxes without displays. It should be compatible with any DAW that supports control surfaces. I've personally used it with Apple Logic Pro and Ableton Live.
The hardware itself is very simple an d based around an STM32F4 evaluation board, sometimes known as "blackpill", while the displays are the SPI variant of the ubiquitous SSD1306 OLED screens.
The software is implemented using the unicore-mx fork of libopencm3 as it has a slighlty better support for the stm32 target platform. It should be relatively easy to port the application code to any microcontroller of choice.
Hardware design files
The hardware is designed using the KiCad EDA
Software
The firmware depends on the arm-none-eabi-gcc toolchain, and to compile it
it's sufficient to invoke
makeAs a convenience, if you have the STLink
tools installed, you can flash the firmware to the device using the st-flash command
with
make flashParts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | MCU | Untitled:YAAJ_BohPill | U1 |
| 1 | Screen 1 | Untitled:display-spi | S1 |
| 1 | Screen 2 | Untitled:display-spi | S2 |
| 1 | Screen 3 | Untitled:display-spi | S3 |
| 1 | Screen 4 | Untitled:display-spi | S4 |
| 1 | Screen 5 | Untitled:display-spi | S5 |
| 1 | Screen 6 | Untitled:display-spi | S6 |
| 1 | Screen 7 | Untitled:display-spi | S7 |
| 1 | Screen 8 | Untitled:display-spi | S8 |
Similar boards
- 2 layers103 × 30.5 mm

- 2 layers31.8 × 47.6 mm

- 2 layers24 × 27.3 mm

Expansion Card Retrofit
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
9 parts1.1kCC-BY-4.0 - 2 layers15.6 × 17.3 mm

SKR Mini TFT Thermistor Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
9 parts1.1kGPL-3.0 - 2 layers39.1 × 49.5 mm

Learnoliver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
9 parts915 - 2 layers17.4 × 16.9 mm

- 2 layers9.8 × 108 mm

- 2 layers

Keyboard after
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
9 parts547GPL-3.0
Questions
How big is the Mcu eight PCB?
It measures 280 × 29.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mcu eight use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcu eight KiCad files?
From the biappi/muScribble repository on GitHub, at the commit this page was made from: the board is hardware/kicad/mcu-eight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcu eight design in my own project?
Its repository states no licence, so its author keeps all rights: ask biappi before reusing the design.