2 layers280 × 29.3 mm
Mcu eight
biappi/muScribble
An hardware USB Scribble Strip that supports the Mackie Control Protocol
9 parts24
SSD1306
22 boardsKiCad boards from 19 GitHub repositories tagged “ssd1306”, the most starred first; open any of them in PCBKit.
- 2 layers36 × 100 mm
Eleph
FeruzTopalov/eleph
GPS-based local relative navigation system for group of up to 6 members
56 parts24GPL-3.0 - 2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10 - 2 layers61.8 × 21.6 mm
USBQuadMouse
PR77/CH554_USBQuadMouseKeyboard
CH554 based USB to Quadrature Mouse and Keyboard Interface
24 parts8MIT - 2 layers65 × 100 mm
- 2 layers94 × 57.8 mm
Artsey ergo
tmshader/artsey-ergo
A 3D printable ergonomic wireless Artsey-based keyboard running ZMK.
36 parts6CERN-OHL-S-2.0 - 2 layers50 × 70 mm
Temp logger
hnz1102/temp-logger
Logging Thermocouple Temperature and Send Data to InfluxDB system.
52 parts5 - 2 layers40 × 60 mm
- 2 layers25.7 × 34.4 mm
TemperatureDisplay
RobThree/TemperatureDisplay
Measures temperature and humidity using a GXHT30 and displays this information on an SSD1306 OLED display. Offers a HTTP endpoint to read values as JSON, also outputs values on serial.
4 parts3MIT - 2 layers109.6 × 44.5 mm
- 2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1 - 2 layers35.5 × 11 mm
CLT
tomikaa87/vigilant-invention
This is just my playground repository for my various hobby projects
7 parts1GPL-3.0 - 2 layers55 × 28 mm
Pihole display cape
Ajimaru/pihole-display
OLED status display for Pi-hole and Unbound on a BeagleBone Black, with hardware buttons and a web UI.
3 partsMIT - 2 layers38 × 35 mm
STM32 Messgeraet
ijafarov7/stm32-klima-messgeraet
Temperatur- und Feuchte-Messgerät mit STM32F103, SHT40 und OLED (C/HAL, KiCad)
19 parts - 2 layers55 × 70 mm
Pocket pet
kondovskii/pocket-pet
Battery-powered handheld virtual pet on a custom 2-layer STM32L433 PCB. FreeRTOS, hand-written SSD1306 and LIS3DH drivers, wake-on-motion.
38 parts - 2 layers60.8 × 70.9 mm
OLED01
mlab-modules/OLED01
OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.
54 partsGPL-3.0 - 4 layers76 × 72 mm
Keychain rev b panel
olerast67/emotion-keychain
Брелок с OLED-экраном и анимированными эмоциями
168 partsApache-2.0 - 2 layers107.7 × 49.8 mm
- 4 layers92.5 × 70 mm
Clock
stevel1212-droid/stm32-rtc-climate-controller
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.
69 partsMIT - 2 layers50 × 67.5 mm
- 2 layers100 × 100 mm
- 4 layers30 × 52.5 mm
Keychain rev b
olerast67/emotion-keychain
Брелок с OLED-экраном и анимированными эмоциями
59 partsApache-2.0