2 layers102.4 × 102.4 mm
Generator 5351 rect sine
MR-DOS/generator_5351_rect_sine
Rectangular and sine generator with Si5351 working up to 200 MHz
284 parts6GPL-3.0
2 layers109.6 × 44.5 mm
Gener5351
MR-DOS/gener53512Simple 3-channel standalone clock generator with Si5351
- Size
- 109.6 × 44.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 44
- Pads
- 227
- Tracks, vias
- 412, 55
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jan 2018
- Updated
- 23 Nov 2021
Overview
Gener5351 is an open-source printed circuit board by MR-DOS, from the MR-DOS/gener5351 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 109.6 × 44.5 mm with 56 parts on 44 nets, routed with 412 tracks and 55 vias.
It is built around the STM32F030F4P6, AMS1117-3.3 and SI5351A-B-GT, with the UG-2864KSWEG01 among its other parts. Its parts include 16 capacitors, 16 resistors, 6 diodes, 6 switches and 5 ICs. It belongs with the STM32 boards of this library.
Main components
4
STM32F030F4P6
TSSOP-20-40℃~+85℃ 12bit 15 16KB 2.4V~3.6V 32 Bit 48MHz 4KB ARM Cortex-M0 Built-in FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SI5351A-B-GT
MSOP-10-40℃~+85℃ 1.71V~3.6V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSSilicon LabsClock Generators, PLLs, Frequency SynthesizersUG-2864KSWEG01
-- OLED Display ROHSUGOLED Display
README
README.mdgener5351
This is a simple 3-channel clock generator for frequencies up to 200 MHz with Si5351 PLL.
HW
Currently, the HW part consists of the Si5351 conected to 3 edge SMA connectors, 6 buttons, 128x64 OLED and STM32F030F4P ARM Cortex M0 microcontroller. The board is powered from mini USB connector.
SW
The software is currently being written and is not ready for being used. The SW is written in C and has SW4STM32 project format.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistors_SMD:R_0805_HandSoldering | R4, R5, R8, R9, R11, R16 |
| 6 | 330 | Resistors_SMD:R_0805_HandSoldering | R2, R3, R6, R7, R10, R15 |
| 6 | LED_GRN | Diodes_SMD:D_0603 | D1, D2, D3, D4, D5, D6 |
| 6 | SW_SPST | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | 100n | Capacitors_SMD:C_0805_HandSoldering | C7, C11, C12, C13 |
| 3 | 1n | Capacitors_SMD:C_0805_HandSoldering | C14, C15, C16 |
| 3 | 2u2 | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C6 |
| 3 | 3K3 | Resistors_SMD:R_0805_HandSoldering | R12, R13, R14 |
| 3 | Conn_Coaxial | petr_kicad:Molex_SMA_Jack_Edge_Mount_Chinese | J3, J4, J5 |
| 2 | 15p | Capacitors_SMD:C_0805_HandSoldering | C9, C10 |
| 2 | 1u | Capacitors_SMD:C_0805_HandSoldering | C4, C5 |
| 1 | 220p | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 25 MHz | Crystals:Crystal_SMD_HC49-SD | Y2 |
| 1 | 330K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 4u7 | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 8 MHz | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | AMS1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x05_Female | Socket_Strips:Socket_Strip_Angled_1x05_Pitch2.54mm | J2 |
| 1 | LM75 | petr_kicad:SO-8_5.3x6.2mm_Pitch1.27mm | U5 |
| 1 | STM32F030F4P6 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3 |
| 1 | Si5351A | petr_kicad:MSOP-10 | U4 |
| 1 | UG-2864KSWEG01 | petr_kicad:UG-2864KSWEG01 | U1 |
| 1 | USB_OTG | Connectors:USB_Mini-B | J1 |
Questions
How big is the Gener5351 PCB?
It measures 109.6 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gener5351 use?
56 parts, built around the STM32F030F4P6, AMS1117-3.3, SI5351A-B-GT and UG-2864KSWEG01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gener5351 KiCad files?
From the MR-DOS/gener5351 repository on GitHub, at the commit this page was made from: the board is HW/Gener5351.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gener5351 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers58 × 34 mm
- 2 layers85.7 × 65.9 mm
- 2 layers76.9 × 100 mm
Bo Tom V3
Chethien1912/Shrimp-Feed-Grinder-Motor-Driver-PCB
Board điều khiển động cơ máy xay thức ăn cho tôm
75 parts - 4 layers54.3 × 76.1 mm
Phase interferometer
mpkendall/phase-interferometer
A 2(or more)-element phase interferometric direction finder for 433 MHz using a passive phased array
78 parts3 - 2 layers90 × 44 mm
- 2 layers
DFC77 ESP01
kev-m/DFC77
A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.
19 parts - 4 layers406 × 27.5 mm
