
USB CDC
addy123d/USB-CDC
A bare-metal thermal printer controller that receives data over USB-CDC, processes it using a custom serial protocol (TSIP), and prints text and images on an RP203 thermal printer.
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

addy123d/USB-CDC
A bare-metal thermal printer controller that receives data over USB-CDC, processes it using a custom serial protocol (TSIP), and prints text and images on an RP203 thermal printer.


evandrosouza-developer/ps2tomsxUSB
This one is a full open design (electronics, pcb and firmware) of a PS/2 Keyboard adapter with USB console for use in MSX and other legacy computers - 15x8 matrix(BCD input - 8 bits "Low active" output).


ahmedkamel382/STM32-Oscilloscope
A custom Digital Storage Oscilloscope (DSO) built with an STM32F401 Black Pill and a custom PCB. Features a 1.47" SPI display, an analog front-end with hardware over-voltage protection, and real-time DSP for waveform…

Circuit-Digest/EdgeSense
Real-time Edge AI firmware & desktop studio for STM32H533 and VL53L8CH 8x8 multi-zone dToF sensor. On-device 3D gesture recognition, surface texture classification, hand posture detection, and raw CNH optical histogram…

yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM


evandrosouza-developer/ps2tomsxUSB
This one is a full open design (electronics, pcb and firmware) of a PS/2 Keyboard adapter with USB console for use in MSX and other legacy computers - 15x8 matrix(BCD input - 8 bits "Low active" output).

yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM

yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM

medo64/UsbOled
USB OLED allows a USB CDC serial connection to SSD1306 OLED Display Modules.

opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

hnz1102/ssh-serial-bridge
Firmware for the ESP32-S3 that bridges an SSH connection (over Wi-Fi) to UART and USB CDC serial ports. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for the SSH server.

serdzz/rp2350-sim800l-ppp
Embassy firmware for Waveshare RP2350-Plus + SIM800L: AT setup via atat, IP over PPP (embassy-net-ppp), sockets via embassy-net. Optional USB CDC logger.

VlasovLabTech/stm32_tmp117_PT1000_temperature
STM32F103C8 USB CDC thermometer project with PT1000 analog sensing and TMP117 I2C reference measurement, plus a desktop Python viewer for live plotting and filtering.


giang-hoangnguyen/MM_Control
Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.

kannakanna1/key
key.kicadsch の 4 行 × 3 列スイッチを読み取り、USB HID Boot Keyboard として入力するファームウェアです。CDC シリアルも複合デバイスのまま残し、参照実装と同じ 1200 bps touch → BootROM 書き込みを使用します。スケッチは firmware/keypad/keypad.ino、ボードパッケージは hardware/key/ch32x035f7p6/ です。

lzbgt/lora-weight-device
LoRaWAN hospital monitoring device concept with paid embedded IoT bring-up review support

medo64/OledFEC
Framework computer expansion card that allows a USB CDC serial connection to SSD1306 OLED display modules.

Samuel20040521/flico
flico 是一台以 Raspberry Pi Pico 為核心、用來量測螢幕 / 光源閃爍(flicker)的小型自製 儀器。光訊號由 Vishay BPW34 矽 PIN 光二極體接收,經 Microchip MCP6004 跨阻 放大器(TIA)轉成電壓,由 Pico 的 ADC 取樣後,透過 USB-CDC 串列傳回桌面端的 Rust GUI(eframe + egui)即時繪出時域波形與 FFT 頻譜。

Samuel20040521/SOC_Final
flico 是一台以 Raspberry Pi Pico 為核心、用於量測螢幕/光源閃爍 (flicker) 的小型自製儀器。光訊號由 Vishay BPW34 矽 PIN 光二極體接收,經 Microchip MCP6004 跨阻放大器 (TIA) 轉成電壓,由 Pico 的 ADC 取樣後,透過 USB-CDC 串列傳回桌面端的 Rust GUI 即時顯示時域波形與 FFT。