Open-source KiCad boards

43 match “USB_CDC”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers55 × 54 mm
USB CDC
addy123d/USB-CDC
A bare-metal thermal printer controller that receives data over USB-CDC, processes it using a custom serial protocol (TSIP), and prints text and images on an RP203 thermal printer.
35 parts
4 layers24.9 × 20 mm
USB UART Converter ch32x033
svddevelop/x033_Converter_CDC_UART_SPI_I2C_PIN
CH32X033 as a USB multitool that allows you to configure pin, UART, SPI, and I2C settings through a terminal.
9 parts
2 layers24 × 17 mm
CH340C
upsidedownlabs/Candy-UART
Candy size USB to UART bridge.
20 parts19
2 layers55 × 65 mm
PS2-MSX F1
evandrosouza-developer/ps2tomsxUSB
This one is a full open design (electronics, pcb and firmware) of a PS/2 Keyboard adapter with USB console for use in MSX and other legacy computers - 15x8 matrix(BCD input - 8 bits "Low active" output).
35 parts7MIT
2 layers32.9 × 49.6 mm
MBusCH55x
jmysu/mBusCH55x
An affordable USB-CDC dev board.
50 parts1GPL-3.0
2 layers88 × 60 mm
DSO Final
ahmedkamel382/STM32-Oscilloscope
A custom Digital Storage Oscilloscope (DSO) built with an STM32F401 Black Pill and a custom PCB. Features a 1.47" SPI display, an analog front-end with hardware over-voltage protection, and real-time DSP for waveform…
25 parts
2 layers38.5 × 31 mm
TOF SCANNER
Circuit-Digest/EdgeSense
Real-time Edge AI firmware & desktop studio for STM32H533 and VL53L8CH 8x8 multi-zone dToF sensor. On-device 3D gesture recognition, surface texture classification, hand posture detection, and raw CNH optical histogram…
58 parts
6 layers98.9 × 81.4 mm
EthernetSwitch
SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch
Managed Ethernet switch platform built around the LAN9645 and STM32H743, featuring copper and SerDes ports, SPI management, RMII, LwIP, and a USB diagnostic CLI.
231 parts
2 layers95.1 × 85.4 mm
Main cart
yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM
77 parts
2 layers24 × 17 mm
FT232RQ
upsidedownlabs/Candy-UART
Candy size USB to UART bridge.
13 parts19
2 layers55 × 65 mm
PS2-MSX F4
evandrosouza-developer/ps2tomsxUSB
This one is a full open design (electronics, pcb and firmware) of a PS/2 Keyboard adapter with USB console for use in MSX and other legacy computers - 15x8 matrix(BCD input - 8 bits "Low active" output).
34 parts7MIT
2 layers95.1 × 85.4 mm
Main cart
yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM
69 parts
2 layers92.7 × 54.8 mm
Receiver cart
yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM
50 parts
2 layers27.4 × 12 mm
UsbOled
medo64/UsbOled
USB OLED allows a USB CDC serial connection to SSD1306 OLED Display Modules.
15 partsMIT
4 layers60.2 × 20.8 mm
PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72
4 layers43.2 × 62 mm
USBAudioBridge
fsodari/USBAudioBridge
NXP RT1010 based USB to I2S bridge to connect to a Digilent Arty A7.
120 parts
2 layers110 × 125 mm
Starter
opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
113 parts
2 layers45 × 35 mm
Milling coupon
opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
33 parts
4 layers85 × 75 mm
Starter
opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
111 parts
2 layers93 × 50 mm
Ssh bridge for raspberrypi
hnz1102/ssh-serial-bridge
Firmware for the ESP32-S3 that bridges an SSH connection (over Wi-Fi) to UART and USB CDC serial ports. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for the SSH server.
37 parts3
2 layers78 × 79 mm
Nri g13-shifter
serdzz/rp2350-sim800l-ppp
Embassy firmware for Waveshare RP2350-Plus + SIM800L: AT setup via atat, IP over PPP (embassy-net-ppp), sockets via embassy-net. Optional USB CDC logger.
38 parts2Apache-2.0
2 layers24 × 24.5 mm
Tmp117
VlasovLabTech/stm32_tmp117_PT1000_temperature
STM32F103C8 USB CDC thermometer project with PT1000 analog sensing and TMP117 I2C reference measurement, plus a desktop Python viewer for live plotting and filtering.
7 parts1
2 layers34.8 × 34.3 mm
STM32F1
cdcortesr/CommBoard
Serial communication board
32 parts
4 layers20 × 55.7 mm
Qcomlt debugboard
CodeLinaro-mirror/qcomlt_debugboard
96boards specifications compliant Mezzanine used to control the DC Input, USB VBUS, PWR/RST buttons and Debug UART via a single USB2.0 CDC interface.
40 partsCERN-OHL-P-2.0