

MM Control
Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 176
- Nets
- 159
- Pads
- 526
- Tracks, vias
- 1,175, 465
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Oct 2026
- Updated
- 25 Oct 2026
Overview
MM Control is an open-source printed circuit board by giang-hoangnguyen, from the giang-hoangnguyen/MM_Control repository on GitHub. It is a 2-layer board of 100 × 100 mm with 176 parts on 159 nets, routed with 1,175 tracks and 465 vias.
It is built around the TMC2209SILENTSTEPSTICK, DRV8872DDA and AMS1117-3.3. Its parts include 39 capacitors, 21 resistors, 17 connectors, 8 ICs and 1 inductor.
Main components
3TMC2209SILENTSTEPSTICK
-Power Management - Modules ROHSTRINAMIC Motion Control GmbHModulesDRV8872DDA
SO-8-40℃~+125℃ 3.6A 565mΩ Interleaved conduction protection、Current sensing/regulation function Yes SO-8 Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMM_Control
Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.
Repo gồm hồ sơ thiết kế (KiCad, Gerber, BOM), firmware, thư viện Python, vỏ in 3D và tài liệu hướng dẫn đặt mạch, mua linh kiện, hàn, kiểm tra, ứng dụng. Tác giả thiết kế: tue-minh. Chỉnh sửa và bổ sung: giang-hoangnguyen.

Bắt đầu
- Đọc hướng dẫn chi tiết tại docs/MM_Control_Hướng dẫn.pdf và docs/MM_Control_Hướng dẫn.pptx.
- Đặt PCB bằng hardware/MM_Control_gerber.zip: 2 lớp, 100 × 100 mm, 1,6 mm.
- Mua linh kiện theo hardware/BOM_MM_Control.csv, thêm 3 module TMC2209, động cơ, nguồn, ST-Link, cáp USB-C dữ liệu.
- Hàn theo 4 giai đoạn (nguồn 5 V, 3,3 V, MCU và USB, driver). Chỉnh RV1 cho TP3 = 5,0 V trước khi gắn linh kiện 5 V.
- Nạp firmware (
firmware/build/Debug/MM_Control.bintại 0x08000000) bằng ST-Link qua J3. - Test từng khối bằng ví dụ Python trong
firmware/python/examples.
Cấp nguồn
| Mục | Giá trị | Cơ sở |
|---|---|---|
| VM dùng được | 6,5–28 V | DRV8872 ≥ 6,5 V, TMC2209 ≤ 28 V (datasheet) |
| Dòng chop mỗi kênh DC | khoảng 1,75 A | 0,35 V / 0,2 Ω (datasheet DRV8872, tự tính) |
| TMC2209 | 2 A RMS mỗi cuộn | datasheet |
| Buck 5 V | 3 A | datasheet TPS5430 |
| Servo STS3215 | bản 7,4 V: 4–7,4 V; có bản 12 V | datasheet Feetech; dùng chung rail VM |
Board không có mạch chống ngược cực trên VM. USB-C không cấp nguồn cho board.
Cấu trúc thư mục
docs/ Hướng dẫn chi tiết (PDF, Word), slide hướng dẫn
hardware/ Gerber, BOM, schematic PDF, dự án KiCad 9
firmware/ Mã nguồn STM32 (CMake), thư viện Python, file .bin dựng sẵn
enclosure/ Vỏ in 3D: STL (hướng in), file Fusion, script dựng vỏ
images/ Ảnh dùng trong tài liệuVỏ in 3D
Hộp hai mảnh, kẹp board bằng 4 vít M4 × 12 qua lỗ góc, 4 insert M4 trong trụ nắp. In PLA.

Nguồn và giấy phép
- Datasheet: TI DRV8872, TPS5430; Trinamic TMC2209; Feetech STS3215 (liên kết trong tài liệu chi tiết, mục 9).
- Repo không kèm file LICENSE.
Parts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C20, C21, C22, C23, C24, C25, C26, C27, C36, C38 |
| 10 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C7, C10, C12, C34, C39, C40, C41, C43 |
| 9 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | 3V3, 5V1, DC_Fault1, DC_Fault2, DC_Fault3, DC_Fault4, MCU1, STEP_EN1, VCC1 |
| 7 | 100uf | Capacitor_SMD:CP_Elec_6.3x5.9 | C8, C9, C11, C13, C30, C31, C32 |
| 6 | MicroStep_Selection | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | MS1.1, MS1.2, MS1.3, MS2.1, MS2.2, MS2.3 |
| 5 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7, J8, J23, J24, J25 |
| 4 | 0.2R | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R2, R3, R4, R20 |
| 4 | DRV8872DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1, U3, U4, U6 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8, R11 |
| 3 | 471 | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2, RN3 |
| 3 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4, J5, J6 |
| 3 | TMC2209_SILENTSTEPSTICK | tmc2209:tue_TMC2209 | U7, U8, U9 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7 |
| 2 | 10pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C18 |
| 2 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolder | C2, C6 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C29 |
| 2 | 2.2uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C19 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J12 |
| 2 | G*** | kibuzzard-6AAE7481 | kibuzzard-6AAE7481, kibuzzard-6AAE7481 |
| 2 | G*** | kibuzzard-6AAE746A | kibuzzard-6AAE746A, kibuzzard-6AAE746A |
| 2 | G*** | kibuzzard-6AAE747C | kibuzzard-6AAE747C, kibuzzard-6AAE747C |
| 2 | G*** | kibuzzard-6AAE712B | kibuzzard-6AAE712B, kibuzzard-6AAE712B |
| 1 | 102 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 20k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 220uf | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 22uh | Inductor_SMD:L_10.4x10.4_H4.8 | L2 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | 5V_BUCK | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | 681 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 8 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J17 |
| 1 | Conn_01x03 | Connector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J18 |
| 1 | G*** | kibuzzard-6AAE12C7 | kibuzzard-6AAE12C7 |
| 1 | G*** | kibuzzard-6AAE72CB | kibuzzard-6AAE72CB |
| 1 | G*** | kibuzzard-6AAE131B | kibuzzard-6AAE131B |
| 1 | G*** | kibuzzard-6AAE70C3 | kibuzzard-6AAE70C3 |
| 1 | G*** | kibuzzard-6AAE7606 | kibuzzard-6AAE7606 |
| 1 | G*** | kibuzzard-6AAE11A1 | kibuzzard-6AAE11A1 |
| 1 | G*** | kibuzzard-6AAE137D | kibuzzard-6AAE137D |
| 1 | G*** | kibuzzard-6AAE111B | kibuzzard-6AAE111B |
| 1 | G*** | kibuzzard-6AAEB0D3 | kibuzzard-6AAEB0D3 |
| 1 | G*** | kibuzzard-6AAEAE35 | kibuzzard-6AAEAE35 |
| 1 | G*** | kibuzzard-6AAE75E4 | kibuzzard-6AAE75E4 |
| 1 | G*** | kibuzzard-6AAE0ECB | kibuzzard-6AAE0ECB |
| 1 | G*** | kibuzzard-6AAE748A | kibuzzard-6AAE748A |
| 1 | G*** | kibuzzard-6AAE1376 | kibuzzard-6AAE1376 |
| 1 | G*** | kibuzzard-6AAE7616 | kibuzzard-6AAE7616 |
| 1 | G*** | kibuzzard-6AAE11CA | kibuzzard-6AAE11CA |
| 1 | G*** | kibuzzard-6AAE12FE | kibuzzard-6AAE12FE |
| 1 | G*** | kibuzzard-6AAE1324 | kibuzzard-6AAE1324 |
| 1 | G*** | kibuzzard-6AAE70A5 | kibuzzard-6AAE70A5 |
| 1 | G*** | kibuzzard-6AAEAE3F | kibuzzard-6AAEAE3F |
| 1 | G*** | kibuzzard-6AAE137A | kibuzzard-6AAE137A |
| 1 | G*** | kibuzzard-6AAF97A4 | kibuzzard-6AAF97A4 |
| 1 | G*** | kibuzzard-6AAEAF4A | kibuzzard-6AAEAF4A |
| 1 | G*** | kibuzzard-6AAE75E6 | kibuzzard-6AAE75E6 |
| 1 | G*** | kibuzzard-6AAE0FD8 | kibuzzard-6AAE0FD8 |
| 1 | G*** | kibuzzard-6AAE1171 | kibuzzard-6AAE1171 |
| 1 | G*** | kibuzzard-6AAE76A8 | kibuzzard-6AAE76A8 |
| 1 | G*** | kibuzzard-6AAE0FE1 | kibuzzard-6AAE0FE1 |
| 1 | G*** | kibuzzard-6AAEB075 | kibuzzard-6AAEB075 |
| 1 | G*** | kibuzzard-6AAE1124 | kibuzzard-6AAE1124 |
| 1 | G*** | kibuzzard-6AAE1368 | kibuzzard-6AAE1368 |
| 1 | G*** | kibuzzard-6AAE0E6C | kibuzzard-6AAE0E6C |
| 1 | G*** | kibuzzard-6AAE131F | kibuzzard-6AAE131F |
The 150 most common of 176 parts.
Similar boards
- 2 layers113.4 × 55.3 mm

- 4 layers180 × 140 mm

- 2 layers80 × 100 mm

- 2 layers90 × 80 mm

- 4 layers20.7 × 10.8 mm

Decoder
phaiderikos/openloco
An open source and open hardware DCC decoder for model locomotives.
24 parts16GPL-3.0 - 4 layers40 × 100 mm

BR Motor
axpaul/Avionic-Mastodonte
Mastodonte experimental rocket avionic (On-board electronics) created by Paul Miailhe, Version 2025
118 parts6CERN-OHL-S-2.0 - 4 layers36 × 90 mm

MotorShield
axpaul/Avionic-Sirius
Sirius experimental rocket avionic (On-board electronics) created by Paul Miailhe, Version 2023/2024 launched at C'space 2024
114 parts2 - 2 layers130 × 119 mm

Questions
How big is the MM Control PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MM Control use?
176 parts, built around the TMC2209SILENTSTEPSTICK, DRV8872DDA and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MM Control KiCad files?
From the giang-hoangnguyen/MM_Control repository on GitHub, at the commit this page was made from: the board is hardware/MM_Control.kicad_pcb and its schematic hardware/MM_Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MM Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask giang-hoangnguyen before reusing the design.