Skip to the content
2 layers80 × 100 mmTelescope board, the printed circuit board in 3D

Telescope board

kaileh57/telescope

a telescope by Kaileh

Size
80 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
59
Pads
160
Tracks, vias
255, 64
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Dec 2025
Updated
24 Jan 2026

Overview

Telescope board is an open-source printed circuit board by kaileh57, from the kaileh57/telescope repository on GitHub. It is a 2-layer board of 80 × 100 mm with 39 parts on 59 nets, routed with 255 tracks and 64 vias.

It is built around the TMC2209SILENTSTEPSTICK, AMS1117-3.3 and AO3401A. Its parts include 11 capacitors, 3 resistors, 2 fuses, 1 IC and 1 diode.

Main components

3

README

README.md

DIY Newtonian Reflector Telescope

I designed my own telescope!

This is a pretty simple Newtonian Reflector style telescope, with a 114mm primary mirror, and a 25mm secondary mirror. I'm making it because I really love taking pictures of the stars, and was able to do some cool stuff a few weeks ago with a telescope at a family member's house! Hopefully this is a (comparatively) low cost way of getting into the field. There's a couple of great dark sky spots near me (Seattle), and hopefully I can update with some awesome pictures.

Hopefully, I can get some pretty cool images of galaxies and other cool objects, and I've included a barlow lens which should help with planetary photography.

I designed as much as possible myself! Unfortunately I don't have the capabilities to make motors or precision optics, and I'm using a modified version of the Crayford Focuser, as I'm not experienced enough with precision optics.

Crayford focuser: https://www.printables.com/model/125438-125-crayford-focuser-for-telescopes/files

Assembly

PCB: image Screenshot 2026-01-01 160001 Screenshot 2026-01-01 160035

CAD: Screenshot 2026-01-01 155525

Annotated CAD: image Azimuth and Altitude motors are connected to the PCB box via pre crimped cables, the Altitude cable should have a significant amount of lose cabling in order to accomodate the rotation of the base. The Raspberry PI HQ Camera is mounted to the end of the focuser, and should be attached via ribbon cable to the Raspberry PI Zero 2 W in the electronics enclosure, which is connected to the power management PCB. The GPS module should be plugged in to its header on the PCB, and should be placed in a location where it has a good view of the sky, for my configuration, it will be mounted on the side of a truck, and therefor is not practical to include in the CAD model. 12v DC power comes in to the PCB from the side. image Approximate limit switch positions, the model here is similar but not identical to the model I already have and am planning to install. The limit switches are wired into the appropriate port on the PCB and are used in calibration so that the telescope knows where its facing.

Annotated Diagram: Untitled drawing

Telescope Focuser: The 1.25" Crayford focuser design is from aeberbach on Printables, licensed under CC BY-NC 4.0.

License

Modified MIT License

text
MIT License (with exception)
Copyright (c) 2026 Kellen Heraty

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

EXCEPTION: This license does NOT apply to the 1.25" Crayford focuser design 
files (STL and STEP files in the /focuser directory), which are provided by 
aeberbach under Creative Commons Attribution-NonCommercial 4.0 International 
License (CC BY-NC 4.0). Those files may not be used for commercial purposes.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

Bill of Materials

Optics & Camera System

CategoryItemQtySpecificationSourceEst. CostLink
OpticsPrimary Mirror (spherical)1114mm diameter, f/8 (912mm FL), enhanced aluminum coating, BK7 glass, 14mm thickAliExpress$25.20Link
OpticsSecondary Mirror (flat diagonal)125 minor axis, flat, enhanced aluminum coatingAliExpressIncludedBundled with primary mirror set
CameraPi HQ Camera1Sony IMX477, 12.3MP, C-mount threadDigikey$50.00Link
CameraCSI cable (adapter)1500mm length, 22-pin (0.5mm pitch) to 15-pin (1.0mm pitch)AliExpress$4.55Link
CameraC-mount to 1.25" adapter1Short profile, screws onto C-mount, 1.25" barrel slides into focuserAliExpress$2.84Link
Accessory2x Barlow lens with T-ring11.25" barrel, 2x magnification, M42×0.75 T-thread for DSLRAliExpress$10.85Link

OTA Tube Assembly & Mirror Cell

CategoryItemQtySpecificationSourceEst. CostLink
OTA HardwareAlignment dowel pins9M3×10mm steel, precisionHardware Store$4.00M3x10 dowel pins
OTA HardwareInterior flocking material1Self-adhesive black velvet or flocking paper, ~900×450mmAliExpress$8.86Link
Mirror CellCollimation bolts3M4×50mm hex headHardware Store$5.00M4x50mm hex bolts
Mirror CellCompression springs30.5mm wire, 5mm od, 10mm longHardware Store$4.00Between floor and floating plate for push-pull collimation
Mirror CellFlat washers (M4)6M4 sizeHardware Store$2.00Top and bottom of each spring M4x9x0.5
Mirror CellWing nuts3M4 threadHardware Store$3.50Hand-adjustable collimation from below
Mirror CellCell mounting screws6M3×16mm socket headHardware Store$4.50Attach cell housing to Segment 1
Mirror CellHeat-set inserts (M3)6M3×6mm×5mmHardware Store$6.00Press into Segment 1 for cell mounting
Mirror CellRTV Silicone1SealantAliExpress$2.96Link
Mirror CellEpoxy or super glue1Small tubeAliExpress$2.31Link

Secondary Spider Assembly

CategoryItemQtySpecificationSourceEst. CostLink
SpiderSpider mounting screws4M3×16mm socket head-Included aboveMount spider ring to Segment 4 (through tube wall at 45° offsets)
SpiderSpider mounting nuts4M3 hex nutsHardware Store$2.00M3 hex nuts for spider mounting
SpiderSecondary mirror adhesive1RTV silicone-Included aboveBonds secondary to 45° holder surface

Mount Structure

CategoryItemQtySpecificationSourceEst. CostLink
MountTube ring clamp bolts2M5×50mm hex headHardware Store$4.00Clamp tube rings around OTA m5x50
MountTube ring to cradle bolts4M5×50mm hex head-Included aboveAttach rings to altitude cradle
MountFork to turntable bolts4M5×25mm socket headHardware Store$3.50Secure forks to turntable
MountM5 nuts6Standard hex nutsHardware Store$2.50For clamp and cradle bolts
MountM5 washers16Flat washersHardware Store$3.00Under bolt heads and nuts
MountHeat-set inserts (M5)4M5 sizeHardware Store$6.00In turntable for fork mounting
MountHex nut (1/4-20)11/4-20 UNC threadHardware Store$1.50Tripod mount in base center
MountFelt/foam tape1Self-adhesive, ~25mm wide rollAliExpress$2.24Link
MountLazy susan mounting screws8M4×12mmHardware Store$4.004 per ring of lazy susan bearing
MountM4 nuts4Standard hex nutsHardware Store$2.00Inner ring of lazy susan (through-hole to base)

Bearings

CategoryItemQtySpecificationSourceEst. CostLink
Bearing608ZZ bearing18mm ID × 22mm OD × 7mm thickAliExpress$4.23Link
BearingLazy Susan bearing (Profile B)1120mm OD, 79mm ID, 8.5mm thick, aluminum, PCD: 91.8mm inner / 109mm outerAliExpress$6.69Link

Drive Systems

CategoryItemQtySpecificationSourceEst. CostLink
Alt DriveNEMA17 Worm Gear Motor (1:32)1RobotDigg, 42×42×48mm motor + 40×58×27mm gearbox, 8mm D-shaft output, 1.8Nm torque, 1.7AAliExpress$28.06Link
Alt DriveShaft coupler (8mm-8mm)1Aluminum, ~25mm body lengthAliExpress$3.49Link
Alt DriveMotor mount screws4M4×10mm flat headHardware Store$3.00-
Alt DriveMount plate screws4M4×20mm socket headHardware Store$3.50Attach motor mount plate to left fork
Az DriveNEMA17 Worm Gear Motor (1:32)1RobotDigg, same spec as altitude motorAliExpress$28.06Link
Az DriveGT2 timing belt (6mm)1~800mm length, open-ended, cut to fitAliExpress$8.48Link
Az DriveGT2 pulley (30T)130 teeth, 8mm bore, 6mm belt widthAliExpress$3.65Link
Az DriveMotor mount screws4M4×12mm flat head-Included aboveThrough slotted holes in base extension tab

PCB Through-Hole Components

CategoryItemQtySpecificationSourceEst. CostLink
PCB TH100µF 25V electrolytic capacitor3Through-hole, radialAliExpress$2.32Link
PCB TH220µF 10V electrolytic capacitor1Through-hole, radialAliExpress$2.15Link
PCB TH2×20 female header12.54mm pitch, through-holeAliExpress$1.42Link
PCB TH1×8 female header42.54mm pitch, through-holeAliExpress$1.61Link
PCB THJST-XH 4-pin connector2Vertical-Included with pigtails kitMotor output connectors (J_MOT1, J_MOT2)
PCB THDC barrel jack15.5×2.1mm, center positiveDigikey$0.64Link

Electronics Modules

CategoryItemQtySpecificationSourceEst. CostLink
ModuleRaspberry Pi Zero 2 W1PI zero 2 wDigikey$15.00Link
ModuleTMC2209 StepStick2BIGTREETECH V1.2 or V1.3AliExpress$9.72Link
ModuleNEO-6M GPS module13.3V logic output ONLY - 5V will damage Pi!AliExpress$8.90Link
ModuleMP1584 buck converter module1Adjustable output, set to 5.0-5.1V, needs to be adjustable for precisionAliExpress$1.57Link
Wiring22awg wire20cmFor connecting MP1584, hard to find in small quantitiesAliExpress$3.04Link
Module10×10mm heatsinks4Aluminum, with thermal adhesive tapeAliExpress$3.94Link

Power & Wiring

CategoryItemQtySpecificationSourceEst. CostLink
Power12V 5A DC power supply15.5×2.1mm barrel jack output, center positiveAliExpress$17.22Link
WiringJST-XH 4-pin pigtails4Pre-crimped leads, ~30cmAliExpress$7.13Link
WiringHeat shrink tubing1Assorted sizes kit-IncludedInsulate splices
WiringMotor cables24-wire, ~50cm, usually included with motorsWith motorsIncludedCheck if included with RobotDigg motors
WiringMotor extension2Allows the cables to reachAliExpress$6.05Link

Accessories

CategoryItemQtySpecificationSourceEst. CostLink
AccessoryRubber friction pads4Self-adhesiveAliExpress$2.18Link

Focuser Components

CategoryItemQtySpecificationSourceEst. CostLink
MotionMR83ZZ bearings43mm ID × 8mm OD × 3mm thickAliExpress$5.24Link
MotionSteel shaft15mm diameter × 90mm length, stainlessAliExpress$2.31Link
MotionAluminum flat bar110mm × 3mm × 150mm (cut 64+64+37 = 165mm needed)AliExpress$3.52Link
MotionCompression springs2OD < 5mm, ~6.5mm length, STIFF (not pen springs)Hardware Store$3.00Small compression springs
InsertsM3 heat-set inserts8M3 × 5mm L × 4.5mm ODHardware Store$8.00M3 heat-set inserts
InsertsM4 heat-set inserts4M4 × 6mm L × 5.5mm ODHardware Store$6.00M4 heat-set inserts
BoltsM3×10mm button head4Button head, bearing axlesHardware Store$3.00Button head screws for bearing axles
BoltsM3×12mm socket head4Socket head, drawtube capHardware Store$3.00Socket head for drawtube cap
BoltsM3×20mm socket head4Socket head, front cap to baseHardware Store$3.50Socket head for front cap
BoltsM4×12mm socket head4Socket head, mount focuser to telescope-Included above-
NutsM3 nylock nuts4Nylon insert lock nuts, secure bearing axlesHardware Store$2.50Nylock nuts for bearing security
NutsM3 hex nut1Standard, pressed into front cap for tension screw-Included above-
NutsM3 thumbscrew1Knurled head, main tension adjustmentHardware Store$3.00Knurled thumbscrew for tension
NutsM3 set screws2Grub screwsHardware Store$2.00-

3D Printed Components

Hoping to print all from the same person, near me in Seattle. Mostly PETG, some PLA, TPU would be cool but not needed at all.

ComponentMaterialInfillEst. Print TimeNotes
OTA - Tube Assembly
Tube_Segment_1 (rear)PETG30% gyroid~12 hoursMirror cell interface, 220mm length, 130mm ID, 4mm wall
Tube_Segment_2PETG30% gyroid~12 hoursMiddle segment, alignment pins at joints
Tube_Segment_3PETG30% gyroid~12 hoursMiddle segment
Tube_Segment_4 (front)PETG30% gyroid~12 hoursFocuser boss (70×70mm), spider mount holes at 45° offset
OTA - Mirror Cell (Hadley-style)
Primary_Mirror_Cell_HousingPETG30%~8 hours154mm OD flange, 120mm ID wall, floor with 40mm vent, 3× spring bosses
Floating_PlatePETG30%~2 hours118mm OD × 8mm, hex pockets for bolt capture, 115mm mirror recess
OTA - Secondary Assembly
Secondary_SpiderPLA or PETG40%~4 hours4-vane design, ring fits inside tube top, 45° mirror holder, 3× collimation screws
OTA - Focuser (aeberbach Crayford - Printables #125438)
Focuser_BodyPETG40%~2.5 hoursMain body with 4× bearing mounts, 4× M3 insert holes for front cap
Pinion_BlockPETG40%~30 minShaft passes through; 2× spring holes in back for tension
Front_CapPETG40%~45 minRecess for M3 hex nut (tension screw); mounts with 4× M3×20mm
DrawtubePETG30%~1.5 hoursPrint flange-down; slots for 2× 64mm aluminum strips
Drawtube_CapPETG30%~30 minPrint flange-down; secures aluminum strips; 4× M3×12mm + M3 inserts
Pinion_Spacer (×2)PETG30%~15 min totalCovers exposed shaft ends outside body
Focus_Knob (×2)PETG30%~30 min totalSmall knob(s)
OTA - Dust Covers
Front_Dust_CapPLA or PETG20%~1 hour139mm ID, 145mm OD, 15mm tall with pull tab
Rear_Dust_CoverPLA or PETG20%~1 hour160mm OD disc with 154/148mm retention ring
Focuser_CapPLA20%~15 min31.5mm plug, 38mm flange, friction fit
Mount - Tube Rings & Cradle
Tube_Ring (×2)PETG30%~4 hours total148mm OD, 140mm ID, split clamp, mounting boss for cradle
Altitude_CradlePETG30%~3 hours200×80×8mm plate, LEFT shaft 45mm (motor side), RIGHT shaft 25mm
Mount - Forks
Altitude_Fork_LEFTPETG30%~8 hours60×120×15mm, 4× M4 heat-set holes for motor mount plate
Altitude_Fork_RIGHTPETG30%~8 hours60×120×15mm, 608ZZ bearing pocket for pivot
Alt_Motor_Mount_PlatePETG30%~1 hour60×60×5mm, NEMA17 pattern, 25mm center clearance hole
Mount - Azimuth Base
Azimuth_Stationary_BasePETG25%~12 hours280mm dia + motor extension tab (80×70×8mm), tripod mount, lazy susan PCD 91.8mm
Azimuth_TurntablePETG25%~6 hours220mm OD, 80mm center hole, lazy susan PCD 109mm, fork mounting bosses
Base_Feet (×4)PETG or TPU30%~2 hours~40mm tall for gearbox clearance, rubber pad attachment
Electronics
Electronics_EnclosurePLA20%~6 hoursBox for PCB + Pi Zero, ventilation slots, friction-fit lid

PCB SMT Components (JLCPCB Assembly)

DesignatorValue/PartLCSC#Qty/BoardExt (2 boards)Notes
C322uF 16V TantalumC7822641$0.67Extended
C4,C7,C8,C9,C10,C11100nF 0603C146636$0.17Basic (6× ~$0.03)
D16.8V Zener SOD-123C21201$0.26Extended
F14A Polyfuse 2920C1392841$0.61Littelfuse Extended
F21.5A Polyfuse 1206C700831$0.33TECHFUSE Extended
Q1AO3401A P-FETC151271$0.11Basic
R1,R2,R310k 0603C258043$0.02Basic
U1AMS1117-3.3C61861$0.32Basic

SMT Total: $2.49 (from JLCPCB quote)

Cost Summary

SourceTotal
Digikey$72.69
AliExpress$285.26
Hardware StoreI will pay/find these parts
JLCPCB$45.71
Total$403.66

Parts

39
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0603_1608MetricC4, C7, C8, C9, C10, C11
6TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP3, TP4, TP5, TP6
4Jumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2, JP3, JP4
3100µF 25VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C5, C6
310kResistor_SMD:R_0603_1608MetricR1, R2, R3
2JST-PHConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ_LIM1, J_LIM2
2JST-XHConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ_MOT1, J_MOT2
2TMC2209_SILENTSTEPSTICKTMC2209_SILENTSTEPSTICK:MODULE_TMC2209_SILENTSTEPSTICKJ_TMC1, J_TMC2
1220µF 10VCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC2
122µF TantCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ1
1D_ZenerDiode_SMD:D_SOD-123D1
1JST-PHConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalJ_GPS1
1J_MP1584Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ_MP1584
1PolyfuseFuse:Fuse_1206_3216MetricF2
1PolyfuseFuse:Fuse_2920_7451MetricF1
1Raspberry Pi ZeroConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ_PI1

Similar boards

  • 2 layers100 × 100 mmMM Control, the printed circuit board in 3D

    MM Control

    giang-hoangnguyen/MM_Control

    Board điều khiển chuyển động dùng STM32F407VET6, 100 × 100 mm, 2 lớp. Một board gồm 4 kênh động cơ DC (DRV8872), 3 socket driver bước TMC2209, cổng bus servo STS3215, USB-C (CDC), CAN và các header SPI, I2C, UART.

    176 parts
  • 4 layers180 × 140 mmOpenPNP, the printed circuit board in 3D

    OpenPNP

    jaytektas/openPNP_mobo

    393 parts
  • 2 layers90 × 80 mmDucMinh, the printed circuit board in 3D

    DucMinh

    tue-minh/PCB_DucMinh

    62 parts
  • 4 layers243.8 × 171.5 mmNeotron Pico, the printed circuit board in 3D

    Neotron Pico

    Neotron-Compute/Neotron-Pico

    A Neotron powered by the Raspberry Pi Pico

    242 parts250
  • 4 layers67 × 98 mmSJ-201-R6, the printed circuit board in 3D

    SJ-201-R6

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    235 parts113
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 4 layers75.2 × 99.5 mmFOC, the printed circuit board in 3D

    FOC

    nordstream3/FOC

    Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…

    261 parts81

Questions

How big is the Telescope board PCB?

It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Telescope board use?

39 parts, built around the TMC2209SILENTSTEPSTICK, AMS1117-3.3 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Telescope board KiCad files?

From the kaileh57/telescope repository on GitHub, at the commit this page was made from: the board is PCB/telescope_board.kicad_pcb and its schematic PCB/telescope_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Telescope board design in my own project?

Its repository states no licence, so its author keeps all rights: ask kaileh57 before reusing the design.