Skip to the content

Boards using the PJ-320A

58 boards

Boards in 39 GitHub repositories, designed in KiCad, that use the PJ-320A by XKB Connection (-20℃~+70℃ 3.5mm Headphone Jack 30V 500mA 插件 Audio Connectors ROHS). See how each wires it, with its parts, size, README and files; the PJ-320A’s symbol, footprint and pinout are on its own page.

  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers22.8 × 36 mmDigirig mobile, the printed circuit board in 3D

    Digirig mobile

    softcomplex/Digirig-Mobile

    Integrated digital modes interface for amateur radio

    64 parts133GPL-3.0
  • 2 layers182.8 × 169.2 mmErgoMaxReversible, the printed circuit board in 3D

    ErgoMaxReversible

    LouWii/ErgoMax

    Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets

    106 parts124
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 2 layers40 × 22.8 mmDigiport-891, the printed circuit board in 3D

    Digiport-891

    BD5HLI/DigiPort

    集成USB口和声卡的业余电台数据模式接口盒子

    45 parts15GPL-3.0
  • 2 layers76.2 × 146.6 mmMysteripad pcb, the printed circuit board in 3D

    Mysteripad pcb

    piit79/mysteripad

    A through-hole mechanical numpad with an extra row to match the Mysterium keyboard

    74 parts12GPL-3.0
  • 2 layers114.3 × 156 mm3DotDash, the printed circuit board in 3D

    3DotDash

    aydenvis/Ortho-Minidox-Choch-Switches

    56 parts9
  • 2 layers50 × 40 mmForceKey v1.0, the printed circuit board in 3D

    ForceKey v1.0

    fred-corp/ForceKey

    a force sensitive morse paddle key

    38 parts7CC-BY-SA-4.0
  • 2 layers265.6 × 116.2 mmYask, the printed circuit board in 3D

    Yask

    sanderboer/box_o_alps

    An alps keeb in a box.

    40 parts7MIT
  • 2 layers102 × 81.9 mmRisha, the printed circuit board in 3D

    Risha

    sboysel/risha

    Risha is an ultra-compact, wired split ortholinear keyboard featuring:

    21 parts5
  • 4 layers60.5 × 60 mmAmiga RGB video splitter, the printed circuit board in 3D

    Amiga RGB video splitter

    jbilander/Amiga_RGB_video_splitter

    Extend your amiga RGB video signal to two display units - screens, monitors, etc, simultaneously

    36 parts4CC-BY-SA-4.0
  • 2 layers50 × 50 mmEffortless, the printed circuit board in 3D

    Effortless

    pierrechevalier83/effortless

    A 3d printed split keyboard (3x5+2) that feels really good and takes minimal effort to print/assemble

    23 parts4
  • 4 layers45 × 30 mmKoe pro v2, the printed circuit board in 3D

    Koe pro v2

    yukihamada/koe-device

    Koe — AI voice companion device + Soluna Edition festival audio. Open hardware, ESP32-S3 + Raspberry Pi CM5, GPS atomic clock sync.

    47 parts1MIT
  • 2 layers142.3 × 105 mmSiamese kitten, the printed circuit board in 3D

    Siamese kitten

    50an6xy06r6n/eggcat

    keyboard stuff

    66 parts
  • 2 layers32 × 25.5 mmAudio Jack, the printed circuit board in 3D

    Audio Jack

    arghya-v/hackxpansion-audio-jack

    This was all possible thanks to Hackspansion: A hackclub YSWS

    16 parts
  • 2 layers505.4 × 130.4 mmSplit keyboard, the printed circuit board in 3D

    Split keyboard

    Arwinplayz/Split-Keyboard-V2

    I decided to make a V2 which would allow me to redo/refine some features. That is I want to add a LiPo battery and change the requirement of having both sides plugged in separately to the PC.

    262 parts
  • 2 layers124.6 × 130.5 mmCustom Hackboard, the printed circuit board in 3D

    Custom Hackboard

    FabioCastroMorffi/Raw-Split

    Raw Split is a wired 36 key split keyboard made with 3 PCBs and powered by an RP pico 2040

    46 parts
  • 2 layers145.7 × 109.3 mmQwail56, the printed circuit board in 3D

    Qwail56

    ixmachine/qwail56

    A split ergonomic mechanical keyboard based on Lily58, crkbd and Sofle.

    79 partsMIT
  • 4 layers52.8 × 40.1 mmBTM308-host, the printed circuit board in 3D

    BTM308-host

    KingJacker/BTM308-bluetooth-module-host

    This is a carrier board for the BTM308 Bluetooth audio module.

    52 parts
  • 2 layers54.5 × 25 mmRecorder TRS+TRRS, the printed circuit board in 3D

    Recorder TRS+TRRS

    meirtolpin11/GA-Cockpit-Recorder-PCB

    A small adapter PCB and 3D-printed enclosure for recording audio from a general aviation (GA) cockpit intercom onto a phone, dictaphone, action camera, or other consumer recorder.

    9 parts
  • 4 layers81.4 × 60 mmMKRZero V5.0, the printed circuit board in 3D

    MKRZero V5.0

    newdigate/samd21g-midi-tool

    kicad design for samdg21 arm cortex m0

    58 partsMIT
  • 2 layers51 × 30 mmEsp32audio, the printed circuit board in 3D

    Esp32audio

    ppisljar/freeesp32_audioplayer

    ESP32 Audio Player main board (KiCad, XIAO ESP32-S3)

    45 parts
  • 4 layers100 × 80 mmAuraForge-50X, the printed circuit board in 3D

    AuraForge-50X

    RaviKachhwaha/AuraForge-50X

    A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…

    83 parts
  • 2 layers139.5 × 98.5 mmSplitKeyboard, the printed circuit board in 3D

    SplitKeyboard

    ReetuInkila/SplitKeyboard

    A split ergo linear keyboard

    84 partsMIT