
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

A through-hole mechanical numpad with an extra row to match the Mysterium keyboard
Mysteripad pcb is an open-source printed circuit board by piit79, from the piit79/mysteripad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.2 × 146.6 mm with 74 parts on 55 nets, routed with 877 tracks and 44 vias.
It is built around the ATMEGA328P-PU and PJ-320A. Its parts include 24 diodes, 8 resistors, 5 capacitors, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Mysteripad is a through-hole numeric keyboard (or "numpad") matching the form factor of the Mysterium keyboard (original), much like the Discipad (original) matches the Discipline (original).
Mysteripad was inspired by (but is not based on) the Discipad by Bryan of cftkb.com.
¹ To reduce the number of required I/O pins from 8 to 5, any two adjacent encoders share an I/O pin. Therefore, rotating any such encoders at higher speed simultaneously might not work correctly. Other combinations (1-3, 1-4, 2-4) should not be affected.
Bill of Materials and build guide (coming soon)
QMK firmware can be found in 42. Keebs QMK fork.
You can grab the Gerber zip files from releases (coming soon), have the PCBs made at one of the fabs and order all the electronic components at your favourite electronics store.
A complete kit will also be available from 42. Keebs sooner or later (probably in July September 2022).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 42keebs:D_DO-35_SOD27_P5.08mm_Horizontal | D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D25 +6 | |
| 16 | KEYSW | 42keebs:Kailh_MX_Socket-swapped-pads | SWB1, SWB2, SWB3, SWB4, SWC1, SWC2, SWC3, SWD1, SWD2, SWD3, SWE1, SWE2, SWE3, SWF1, SWF2, SWF3 |
| 6 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4, H5, H6 |
| 4 | 5.1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R7, R8 |
| 4 | RotaryEncoder_Switch_Combo | 42keebs:Kailh_MX_Socket-plus-EC11-encoder | ENC_SWA1, ENC_SWA2, ENC_SWA3, ENC_SWA4 |
| 3 | KEYSW | 42keebs:Kailh_MX_Socket-2u-swapped-pads-reversed-stabilizer | SWC4, SWE4, SWFB1 |
| 2 | 0.1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C3 |
| 2 | 22p | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 2 | 3.6V | 42keebs:ZD_DO-35_SOD27_P5.08mm_Horizontal_smaller | D1, D2 |
| 2 | 75R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
| 1 | 1.5K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 42_Keebs_Logo | 42keebs:42Keebs-icon-10mm-Mask | LOGO1 |
| 1 | 500mA | 42keebs:polyfuse_5.1mm | F1 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | BOOT | kbd:ResetSW_1side | BOOT1 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | PJ-320A | 42keebs:PJ-320A | J1 |
| 1 | RST | kbd:ResetSW_1side | RESET1 |
| 1 | USB_C_GCT_USB4085 | 42keebs:USB_C_GCT_USB4085-offset-pads | USB1 |

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio

LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus




It measures 76.2 × 146.6 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the ATMEGA328P-PU and PJ-320A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the piit79/mysteripad repository on GitHub, at the commit this page was made from: the board is mysteripad_pcb.kicad_pcb and its schematic mysteripad_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).