

MKRZero V5.0
kicad design for samdg21 arm cortex m0
- Size
- 81.4 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 69
- Pads
- 243
- Tracks, vias
- 433, 303
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Aug 2024
- Updated
- 8 Oct 2026
Overview
MKRZero V5.0 is an open-source printed circuit board by newdigate, from the newdigate/samd21g-midi-tool repository on GitHub, published under the MIT licence. It is a 4-layer board of 81.4 × 60 mm with 58 parts on 69 nets, routed with 433 tracks and 303 vias.
It is built around the W25Q128JVSIQ, CR1220-2 and PCF8523T, with the PJ-320A, PMEG2005EL and PRTR5V0U2X,215 among its other parts. Its parts include 16 capacitors, 15 resistors, 6 ICs, 6 connectors and 4 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
6W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHCR1220-2
--40~80℃ Battery base CR1220 Phosphor bronze - Battery holder base ROHSQ&JButton And Strip Battery ConnectorPCF8523T
SOIC8Real-Time Clock (RTC) and calendarNXP SemiconductorsUncategorisedPJ-320A
插件-20℃~+70℃ 3.5mm Headphone Jack 30V 500mA 插件 Audio Connectors ROHSXKB ConnectionAudio Connectors (Headphones)PMEG2005EL
SOD-8821 Independent 20V 30uA@10V 3A 500mA 500mV@500mA SOD-882 Schottky Diodes ROHSNexperiaSchottky DiodesPRTR5V0U2X,215
-UncategorisedNXP Semiconductors
README
README.mdMidi Tool
kicad design files for a general purpose midi dev board based on Arduino MKRZero
- samdg21 arm cortex m0 microcontroller
- DIN-5 midi input and output
- st7735 display (128x128 16bit)
- PCF8523T realtime clock RTC
- socket for micro-SD card
- status LED
- SWD connection for programming
- PJ-320A connector for 2 foot-switches
- 5V POWER via USB
- 3V3 regulator
- 4-pin socket for neopixel strip
- Status LED
Firmware
Kicad plugins
Arduino libraries
sources / credits:
- schematics and pcb design based on MKRZERO Arduino
- 3d models:
- footprints
images


Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C9, C10, C11, C16 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8, R14, R15 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C13, C14 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R13 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | DIN-5 | MKRZero_V5.0:Deltron-671-0501-5 | JMIDIIN1, JMIDIOUT1 |
| 2 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 1 | .1uF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323 | D4 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 2X3_SMD_MALE | MKRZero_V5.0:2X3_SMT | J2 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm | Q1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 39 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 6N138 | Package_SO:SOP-8_6.605x9.655mm_P2.54mm | U3 |
| 1 | AMPHENOL_114-00841-68 | MKRZero_V5.0:AMPHENOL_114-00841-68 | J3 |
| 1 | AP7215-33YG-13 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | ATSAMD21G18A-48 | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | BLM18PG471SN1D | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | CR1220-2 | CR12202:CR12202 | IC2 |
| 1 | Conn_01x03_Pin | MKRZero_V5.0:MG03254F-RA | J7 |
| 1 | Conn_01x08_Pin | MKRZero_V5.0:ST7735 | J6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | PCF8523T | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | PJ-320A | PJ-320A_Library:PJ-320A | J8 |
| 1 | PMEG2005EL | Diode_SMD:D_SOD-323 | D2 |
| 1 | PRTR5V0U2X,215 | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U4 |
Similar boards
- 2 layers61.5 × 25 mm

- 4 layers67.6 × 25 mm

AllWizeK2-hardware
AllWize/AllWizeK2-hardware
Hardware files for the AllWize K2 board
96 parts1LGPL-2.1 - 2 layers

- 2 layers68.6 × 53.3 mm

PIDheaterUnoShield
diegodierick/Heater-shield
This repository contains code and design files for a four channel Arduino based heater.
40 parts1 - 2 layers44 × 50 mm

RadioSupport
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
25 parts35Unlicense - 2 layers25.4 × 25.4 mm

- 2 layers131.2 × 132.5 mm

- 2 layers19 × 106 mm

Questions
How big is the MKRZero V5.0 PCB?
It measures 81.4 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MKRZero V5.0 use?
58 parts, built around the W25Q128JVSIQ, CR1220-2, PCF8523T and PJ-320A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MKRZero V5.0 KiCad files?
From the newdigate/samd21g-midi-tool repository on GitHub, at the commit this page was made from: the board is hardware/MKRZero_V5.0.kicad_pcb and its schematic hardware/MKRZero_V5.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MKRZero V5.0 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).