Skip to the content
12345678

PCF8523T

NXP Semiconductors

Real-Time Clock (RTC) and calendar

Part id
nxp/PCF8523T
Category
Uncategorised
Package
SOIC8
Pins
8
Used on
53 open-source boards

Overview

The PCF8523T is an uncategorised made by NXP Semiconductors in a SOIC8 package with 8 pins. Real-Time Clock (RTC) and calendar.

PCBKit's library has its KiCad symbol (Timer_RTC:PCF8523T, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 53 open-source boards in 44 repositories on GitHub use it.

Symbol

OSCI1OSCO2VBAT3VSS4SDA5SCL6INT1/CLKOUT7VDD8
Timer_RTC:PCF8523TFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the PCF8523T
PinNameType
1OSCIInput
2OSCOOutput
3VBATPower in
4VSSPower in
5SDAInput/output
6SCLInput
7INT1/CLKOUTOpen collector
8VDDPower in

Open-source boards using it

53See all 53
  • 2 layers19 × 106 mmPetRockMain1, the printed circuit board in 3D

    PetRockMain1

    jsenzel1/petrock

    Eurorack components and footprints for KiCad.

    117 parts48
  • 2 layers158 × 85 mmPiPLC Mainboard, the printed circuit board in 3D

    PiPLC Mainboard

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    154 parts19
  • 2 layers36 × 29.3 mmBle mvp 1b rev0, the printed circuit board in 3D

    Ble mvp 1b rev0

    saewoonam/ble_adv_covid

    Repo to implement the advertise and scanner portion for bluetooth to enable encounter/exposure tracing (e.g. Apple/Google / TCN / etc...) on a nRF52840 based battery powered dongle/device

    71 parts10
  • 2 layers115 × 100 mmCog1, the printed circuit board in 3D

    Cog1

    diegodemarco/cog1

    cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.

    133 parts6MIT
  • 2 layers104 × 43.3 mmSerial snooper, the printed circuit board in 3D

    Serial snooper

    can-caglar/Data-Logger-STM32

    The Serial Snooper is a UART data logger with automatic baud rate detection, real-time data stamping and a command-line-interface for configuration, running on an STM32F3 microcontroller.

    101 parts4
  • 2 layers49.5 × 106 mmSupra board, the printed circuit board in 3D

    Supra board

    jsenzel1/supra

    is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled

    119 parts4
  • 2 layers48.3 × 123.8 mmAltimeter v2, the printed circuit board in 3D

    Altimeter v2

    pimbongaerts/altimeter

    Underwater sonar/USBL interface for photogrammetry surveys. PCB design files and Arduino code.

    74 parts4
  • 2 layersGenesis, the printed circuit board in 3D

    Genesis

    iffycodes/Genesis

    Genesis Board design

    98 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PCF8523T?

Yes. The symbol is Timer_RTC:PCF8523T and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCF8523T?

SOIC8, with 8 pins. Its footprint is drawn on this page.

What can replace the PCF8523T?

Parts like it in the library: the LTA8062XS8/R8 by Linearin, the SD8568 by WAVE, the FH9926 by XIN FEI HONG and the LTC8836XS8/R8 by Linearin. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCF8523T?

53 boards in 44 repositories on GitHub; the most starred are listed on this page, with their KiCad files.