Skip to the content

Boards using the RC0603FR-071ML

51 boards

Boards in 43 GitHub repositories, designed in KiCad, that use the RC0603FR-071ML by Unknown maker. See how each wires it, with its parts, size, README and files; the RC0603FR-071ML’s symbol, footprint and pinout are on its own page.

  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense
  • 4 layers46.4 × 99.8 mmTrimix Analyzer, the printed circuit board in 3D

    Trimix Analyzer

    magnus188/aegir

    Open-source ESP32-P4 trimix analyzer prototype for technical diving,

    171 parts14
  • 2 layers37 × 130 mmC6remote, the printed circuit board in 3D

    C6remote

    landonr/homething-c6

    ESP32-C6 remote board inspired by homeThing

    53 parts7
  • 4 layers70 × 70 mmBlue interface board, the printed circuit board in 3D

    Blue interface board

    BetzDrive/interface-board

    Power and signal conditioning board for the Betz Drive system

    130 parts5
  • 4 layers40 × 50 mmCrawler schematic, the printed circuit board in 3D

    Crawler schematic

    SySch415/MITE-ESC

    Electronic Speed Controller for SCX24 rock crawlers

    82 parts5MIT
  • 4 layers88.9 × 79.4 mmLink, the printed circuit board in 3D

    Link

    oats-center/avena-rs

    Avena On The Road: Bringing pavement health data to your fingertips

    170 parts3
  • 4 layers116 × 112 mmBldc esc, the printed circuit board in 3D

    Bldc esc

    EwoudVV/bldc-esc

    A custom STM32 motor controller for BLDC and PMSM motors.

    453 parts2
  • 2 layers70 × 55 mmCapsicum, the printed circuit board in 3D

    Capsicum

    hutscape/capsicum

    🫑 Retrofit a wired doorbell to add WiFi and make it connected 🔔

    80 parts2
  • 2 layers56 × 47 mmUlp flasher, the printed circuit board in 3D

    Ulp flasher

    LieBtrau/ultra-low-power-led-flasher

    ATtiny13 firmware to drive the flasher

    56 parts2GPL-3.0
  • 4 layers112 × 90 mmNova pcb v6 power v2, the printed circuit board in 3D

    Nova pcb v6 power v2

    Ace2932/Fennec

    This project is a heavily modified fork of the open-source NovaSM3 quadruped, redesigned to serve as a research platform for embodied AI.

    61 parts1MIT
  • 4 layers59 × 101 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    aliaksei-lameyka/ENKU-Base-reader

    Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

    127 parts1CERN-OHL-W-2.0
  • 4 layers160 × 161.8 mmAcquisition board, the printed circuit board in 3D

    Acquisition board

    open-ephys/oe-acquisition-board-gen3

    3rd Generation Open Ephys USB Acquisition Board

    360 parts1
  • 4 layers65 × 64 mmPiweather, the printed circuit board in 3D

    Piweather

    pluggee/piweather

    raspberry pi based system for weather monitoring and automation

    60 parts1MIT
  • 4 layers51 × 34.3 mmR1001, the printed circuit board in 3D

    R1001

    pluggee/R1001

    DRV8825 Based Stepper Motor Driver

    50 parts1GPL-3.0
  • 4 layers159 × 21.7 mmKSS V50, the printed circuit board in 3D

    KSS V50

    anaidan/KSS_V50

    Kinetic Sun Sculpture V50

    128 parts
  • 4 layers165 × 100 mmUsb scoring platform, the printed circuit board in 3D

    Usb scoring platform

    AndrewCraswell/agency

    Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.

    224 partsMIT
  • 4 layers1 × 55.8 mmBlockBuilder, the printed circuit board in 3D

    BlockBuilder

    AnotherMike-exe/KiCadBlocks

    Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

    82 partsMIT
  • 2 layers290 × 280 mmCm5-guard A, the printed circuit board in 3D

    Cm5-guard A

    Brico-Hams/antenaSatCommrotor

    DUPLEXER 145 / 435 MHz — BNC — 25 W TARGET — REV A

    158 parts
  • 4 layers65 × 56 mmCanary pwr, the printed circuit board in 3D

    Canary pwr

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    132 parts
  • 4 layers191.5 × 121.8 mmFoxhunt1, the printed circuit board in 3D

    Foxhunt1

    gx1400/kicad_foxhunt_batterytest

    Custom amateur radio fox hunt (hidden transmitter) controller, aimed at being a flexible, dynamic platform for a wide range of fox-hunt formats — not just a fixed single-mode beacon.

    260 parts
  • 2 layersOmniStimDriverBoard PCB, the printed circuit board in 3D

    OmniStimDriverBoard PCB

    Hamza-Anver/OmniStimDriverBoard-PCB

    This is an evaluation board to test operating principles of the OptiStim head unit.

    99 parts
  • 2 layers113 × 65 mmOmniStimEvalBoard, the printed circuit board in 3D

    OmniStimEvalBoard

    Hamza-Anver/OmniStimEvalBoard-Hardware

    This is an evaluation board to test operating principles of the OptiStim head unit.

    102 parts
  • 2 layers45.5 × 23 mmHeimdall switch, the printed circuit board in 3D

    Heimdall switch

    heimdall-suite/heimdall-switch

    Wireless power switch node for RC vehicles, part of the Heimdall Suite.

    42 parts