
Standalone scoring box
AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.

ESP32-C6 remote board inspired by homeThing
C6remote is an open-source printed circuit board by landonr, from the landonr/homething-c6 repository on GitHub. It is a 2-layer board of 37 × 130 mm with 53 parts on 55 nets, routed with 462 tracks and 65 vias.
It is built around the TSOP6136TT, TL3315NF160Q and RC0603FR-07100KL, with the XL-2020RGBC-WS2812B, RC0603FR-071ML and CC0603KRX7R9BB104 among its other parts. Its parts include 14 resistors, 11 switches, 7 diodes, 4 capacitors and 4 transistors. It belongs with the home automation and IoT and radio and wireless boards and the ESP32 and RISC-V boards of this library.
Open c6remote.kicad_pro in KiCad.
KiCad must resolve ../kicad lib/Library.pretty/ with the Library nickname.
The sym-lib-table file registers these symbol libraries:
ano rotary: The local ano rotary.kicad_sym file contains the Adafruit ANO rotary encoder symbol.Seeed_Studio_XIAO_Series: Seeed Studio's OPL KiCad library supplies the XIAO module symbols.The 3dmodels/ directory contains the board models.
See the 3D model sources for the source of each file.
The repository uses the same KiCad MCP server with Codex and GitHub Copilot in VS Code:
../.mcp.json../.vscode/mcp.jsonRun this workflow from the repository root.
Use a unique session name for each schematic or custom-footprint edit loop.
The PCB must remain unchanged between preflight and verify.
./scripts/hw.py doctor
./scripts/hw.py preflight my-edit
# Inspect the baseline before an edit.
./scripts/hw.py inspect my-edit component U3
./scripts/hw.py inspect my-edit net sda
./scripts/hw.py inspect my-edit pin U3 14
# Run after every schematic or custom-footprint edit.
./scripts/hw.py quick my-edit
# Inspect the refreshed state and all baseline changes.
./scripts/hw.py inspect my-edit changes
# Run once before handoff.
./scripts/hw.py verify my-edit
./scripts/hw.py clean my-editNative KiCad ERC is authoritative. Semantic analysis detects topology, BOM, metadata, findings, and custom-footprint regressions.
Use --json with inspect for stable structured output.
Use --force with quick or inspect to bypass reusable analysis.
Session artifacts stay in .cache/hw/<session>/.
The preflight command does not replace an existing session.
Reuse one session for repeated inspect and quick commands.
The session keeps its original baseline until you run clean.
If a session is old or incomplete, run clean and preflight again.
The tool refreshes stale inspection data before it prints results. It reuses validated analysis and changed-footprint data when all fingerprints match. It does not reuse failed or incomplete output. It rejects simultaneous operations on one session.
The tool resolves kicad-cli from KICAD_CLI, PATH, or the macOS application bundle.
It resolves the analyzer from KICAD_HAPPY_DIR, shared, Codex, or Claude skill locations.
An invalid override stops discovery.
The doctor command prints each selected path.
The analyzer must emit schema 1.4.x.
If the analyzer is missing or incompatible, move or remove its existing destination. Then install the pinned version:
python3 "${CODEX_HOME:-$HOME/.codex}/skills/.system/skill-installer/scripts/install-skill-from-github.py" --repo aklofas/kicad-happy --ref v2.2.0 --path skills/kicadExit code 0 means pass.
Exit code 1 means a design regression.
Exit code 2 means a tooling or configuration failure.
A PCB change makes quick and inspect fail before analysis starts.
The message explains that the session cannot validate PCB edits.
The quick command blocks only new deterministic analyzer errors.
The verify command always runs fresh native checks and stores outputs in the session cache.
Run these commands from this directory:
# Schematic ERC
/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli sch erc c6remote.kicad_sch --exit-code-violations
# Board DRC
/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli pcb drc c6remote.kicad_pcb --exit-code-violations
# Full board DRC with schematic parity and zone refill
/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli pcb drc c6remote.kicad_pcb --schematic-parity --refill-zones --exit-code-violationsRegenerate all Gerber, drill, position, and BOM files in export/:
../scripts/regen-fab.shRegenerate only the BOM after you edit symbol sourcing fields:
../scripts/export-bom.shUse this script instead of the KiCad MCP export_bom tool.
The MCP tool uses a different schema and removes the custom sourcing columns.
Render reusable 2D board views in renders/<format>/:
../scripts/render-2d.sh
../scripts/render-2d.sh --side top
../scripts/render-2d.sh --side bottom --format pdfGenerate the interactive HTML BOM for the pre-fabrication pin-1 check:
../scripts/gen-ibom.shThe command writes the ignored ibom.html file in this directory.
The pre-commit hook also updates it when you stage c6remote.kicad_pcb.
Complete the pre-fabrication checklist before you order a board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | SW_Push | Library:SW_TL3315NF160Q | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R12, R13, R14 |
| 6 | XL-2020RGBC-WS2812B | Library:LED_XL-2020RGBC-WS2812B_PLCC4_2.0x2.0mm | D2, D3, D4, D5, D6, D7 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R10, R11, R15 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Battery | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | DMM-4026-B-I2S-R | Library:MIC_DMM-4026-B-I2S-R | MK1 |
| 1 | INL-3AHIR30 | Library:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRBlack | D1 |
| 1 | IR_RX | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | IR_TX | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | LED_DIN | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | PCF8575DBR | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U3 |
| 1 | Qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | SCK | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | SD | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TSOP6136 | Library:Vishay_PANHEAD-4Pin_TopView | U2 |
| 1 | WS | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | XIAO-ESP32-C6 | Seeed_Studio_XIAO_Series:XIAO-ESP32-C6-SMD | U1 |
| 1 | ~ | Library:Ano Rotary | ENC1 |

AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.


DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.



iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.
It measures 37 × 130 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the TSOP6136TT, TL3315NF160Q, RC0603FR-07100KL and XL-2020RGBC-WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the landonr/homething-c6 repository on GitHub, at the commit this page was made from: the board is c6remote-kicad/c6remote.kicad_pcb and its schematic c6remote-kicad/c6remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask landonr before reusing the design.