Skip to the content
4 layers59 × 101 mmEnku mainboard r0.1, the printed circuit board in 3D

Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

Size
59 × 101 mm
Copper layers
4
Thickness
1.6 mm
Parts
127
Nets
102
Pads
438
Tracks, vias
3,383, 329
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Oct 2026
Updated
25 Oct 2026

Overview

Enku mainboard r0.1 is an open-source printed circuit board by aliaksei-lameyka, from the aliaksei-lameyka/ENKU-Base-reader repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 59 × 101 mm with 127 parts on 102 nets, routed with 3,383 tracks and 329 vias.

It is built around the ESP32-S3-WROOM-1-N16R8, TPS63802DLAR and DM3AT-SF-PEJM5, with the BMI270, USBLC6-2SC6 and CC0805KKX7R8BB475 among its other parts. Its parts include 52 resistors, 32 capacitors, 7 ICs, 6 connectors and 6 switches. It belongs with the computers and single-board computers boards and the ESP32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

12

README

hardware/mainboard/kicad/README.md

Current KiCad source - physical R138

Open enku-mainboard-r0.1.kicad_pro with KiCad10.0.7. Matching PCB/root schematic and power.kicad_sch, mcu_io.kicad_sch, epd_hv.kicad_sch, connectors.kicad_sch are canonical. Local symbols/footprints and library tables accompany them.

Qualification/documentation R139; NO FAB. Project status, mainboard overview, handoff, packet record.

The r0.1 filename preserves sheet/library references. Other versioned PCB files are historical trials. checks/current_checkpoint.json selects the immutable R138 guard set; verified checkpoints/proof and historical files are retained. Do not use an old variant as current factory input.

Actual native10.0.7 DRC/ERC/opens/parity zero; 27 scopes and 20 effective rejection cases. Accepted evidence. Physical qualification NOT RUN; a green check grants no manufacturing permission.

Parts

127
QtyValueFootprintReferences
84.7uF 25VENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC5, C24, C25, C26, C27, C28, C29, C31
6100kENKU:R_RC0603_YAGEO_REFLOWR10, R13, R16, R35, R36, R72
6100nFENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC10, C14, C17, C18, C19, C21
50R (22R tune)ENKU:R_RC0603_YAGEO_REFLOWR20, R21, R22, R64, R65
522RENKU:R_RC0603_YAGEO_REFLOWR30, R31, R32, R33, R34
522uF 10VENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC7, C8, C9, C11, C12
4ENKU:MOUNT_HOLE_D2_2_BOARD_ONLYH1, H2, H3, H4
410kENKU:R_RC0603_YAGEO_REFLOWR11, R12, R17, R18
4TL1016AAF160QGENKU:TL1016AAF160QG_ESWITCH_P520001SW3, SW4, SW5, SW6
30RENKU:R_RC0603_YAGEO_REFLOWR19, R28, R29
31k 1%ENKU:R_RC0603_YAGEO_REFLOWR86, R87, R88
3MBR0530T1GENKU:MBR0530T1G_ONSEMI_CASE425HD1, D2, D3
2100k 1%ENKU:R_RC0603_YAGEO_REFLOWR40, R82
2100nF 10VENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC37, C38
210uF 10VENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC13, C16
21MENKU:R_RC0603_YAGEO_REFLOWR39, R66
21uF 25VENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC22, C23
22.2k 1%ENKU:R_RC0603_YAGEO_REFLOWR84, R85
24.7kENKU:R_RC0603_YAGEO_REFLOWR24, R25
25.1k 1%ENKU:R_RC0603_YAGEO_REFLOWR62, R63
2GNDENKU:SERVICE_PAD_D1_5_NO_PASTETP1, TP14
10.47uH DFE201612E-R47M=P2ENKU:Murata_DFE201612EL1
10R DNPENKU:R_RC0603_YAGEO_REFLOW_DNP_NO_PASTER67
1100nF 25VENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC6
110k 0.1% 25ppmENKU:R_RT0603_YAGEO_REFLOWR71
11M 1%ENKU:R_RC0603_YAGEO_REFLOWR38
11S LiPo PCM / PH-2ENKU:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
11nF C0G 10VENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC39
11uFENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC15
11uF 10VENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC2
11uF 25VENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC4
11uF 25V X7RENKU:C_CC0805_YAGEO_REFLOW_TRANSFERC30
12.2R 1% 0805ENKU:R_CRCW0805_HP_VISHAY_REFLOWR37
126.7k 0.1% 25ppmENKU:R_RT0603_YAGEO_REFLOWR70
12M 1%ENKU:R_RC0603_YAGEO_REFLOWR26
12k 1%ENKU:R_RC0603_YAGEO_REFLOWR9
13.3k 1%ENKU:R_RC0603_YAGEO_REFLOWR73
13.48k 1%ENKU:R_RC0603_YAGEO_REFLOWR8
133.2k 1%ENKU:R_RC0603_YAGEO_REFLOWR81
13V3_SYSENKU:SERVICE_PAD_D1_5_NO_PASTETP6
14.7nFENKU:C_CC0603_YAGEO_REFLOW_TRANSFERC35
140.2k 1%ENKU:R_RC0603_YAGEO_REFLOWR80
147kENKU:R_RC0603_YAGEO_REFLOWR23
147uH TYS5040470M-10ENKU:TYS5040_LAIRD_G42_T14_H23L2
1511k 1%ENKU:R_RC0603_YAGEO_REFLOWR14
1680k 1%ENKU:R_RC0603_YAGEO_REFLOWR27
169.8k 1%ENKU:R_RC0603_YAGEO_REFLOWR83
191k 1%ENKU:R_RC0603_YAGEO_REFLOWR15
1AO3401AENKU:AO3401A_AOS_SOT23Q2
1BMI270ENKU:BMI270_Bosch_LGA14U5
1BOOT / RECOVERYENKU:TL3342F160QG_ESWITCH_P010632JSW2
1BQ24072TRGTRENKU:BQ24072T_RGT0016C_TIU3
1EPD_GDRENKU:SERVICE_PAD_D1_5_NO_PASTETP9
1EPD_RESEENKU:SERVICE_PAD_D1_5_NO_PASTETP10
1EPD_VCOMENKU:SERVICE_PAD_D1_5_NO_PASTETP13
1EPD_VGHENKU:SERVICE_PAD_D1_5_NO_PASTETP11
1EPD_VGLENKU:SERVICE_PAD_D1_5_NO_PASTETP12
1ESP32-S3-WROOM-1-N16R8ENKU:ESP32_S3_WROOM_1_N16R8_EP_GRID_03_TENT_REQUESTU1
1External cell NTC / hand solderENKU:NTC_WIRE_TERMINALS_TS_BAR_GND_NO_PASTEJ8
1FH34SRJ-24S-0.5SH(50)ENKU:FH34SRJ-24S-0.5SHJ3
1GCT USB4215-03-AENKU:USB4215_03_A_GCT_REVAJ5
1Hirose DM3AT-SF-PEJM5ENKU:MICROSD_DM3AT_ENKUJ2
1IRLML6346TRPBFENKU:IRLML6346_INFINEON_MICRO3Q1
1MK-12C03-G015ENKU:GSWITCH_MK12C03_G015_DRAWING_REVIEWSW1
1REG_PGENKU:SERVICE_PAD_D1_5_NO_PASTETP8
1SYS_ENENKU:SERVICE_PAD_D1_5_NO_PASTETP7
1TLV3012BIDBVRENKU:TLV3012B_DBV0006AU10
1TMUX1101DBVRENKU:TMUX1101_TI_DBV0005AU9
1TPS63802DLARENKU:TPS63802_DLA0010A_SPLIT_PASTEU4
1Tag-Connect TC2030-IDC-NLENKU:TC2030_NL_CONTACTS_PIN1J7
1USBLC6-2SC6ENKU:USBLC6_2SC6_ST_SOT23_6LU8
1VBATENKU:SERVICE_PAD_D1_5_NO_PASTETP4
1VBUS_USBENKU:SERVICE_PAD_D1_5_NO_PASTETP2
1VSYSENKU:SERVICE_PAD_D1_5_NO_PASTETP5

More from aliaksei-lameyka/ENKU-Base-reader

1
  • 4 layers59 × 101 mmEnku mainboard r1.7-base sd power sclk mosi, the printed circuit board in 3D

    Enku mainboard r1.7-base sd power sclk mosi

    aliaksei-lameyka/ENKU-Base-reader

    Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

    125 parts1CERN-OHL-W-2.0

Similar boards

  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 4 layers65 × 52 mmProtogenControllerV1, the printed circuit board in 3D

    ProtogenControllerV1

    coelacant1/Protogen-Electronics

    SmartMatrix SmartLED Shield breakout for Protogen hardware

    77 parts8GPL-3.0
  • 4 layers60 × 130 mmParsnip, the printed circuit board in 3D

    Parsnip

    LimesKey/parsnip-node

    A portable LoRa communicator. Custom 4-layer PCB (ESP32-S3 + E22P-915M30S LoRa + NEO-M9N GNSS), designed in KiCad for 915 MHz.

    481 parts6
  • 2 layers60 × 60 mmArcboard stm32-mk2, the printed circuit board in 3D

    Arcboard stm32-mk2

    christrotter/arcboard-stm32-mk2

    Next iteration of the stm32f405 board; paradigm shift means new repo.

    94 partsMIT
  • 4 layers212 × 116 mmEswitch simple, the printed circuit board in 3D

    Eswitch simple

    dpeckham/eswitch

    8-channel ESP32-S3 + PROFET+2 (BTS7008-1EPP) 12V load switch with 3-position ATO fuse bypass, KiCad 10, script-generated

    230 parts
  • 8 layers320 × 380 mmChess board, the printed circuit board in 3D

    Chess board

    nicksan222/chess

    Make your move. Watch the board come alive. ♟️✨

    347 partsMIT
  • 8 layers64 × 56 mmPS GAN-60W, the printed circuit board in 3D

    PS GAN-60W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    89 parts4MIT
  • 2 layers278 × 94 mmDune, the printed circuit board in 3D

    Dune

    ayaangrover/dune

    a wireless low profile hotswap split keyboard

    90 parts2MIT

Questions

How big is the Enku mainboard r0.1 PCB?

It measures 59 × 101 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Enku mainboard r0.1 use?

127 parts, built around the ESP32-S3-WROOM-1-N16R8, TPS63802DLAR, DM3AT-SF-PEJM5 and BMI270. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Enku mainboard r0.1 KiCad files?

From the aliaksei-lameyka/ENKU-Base-reader repository on GitHub, at the commit this page was made from: the board is hardware/mainboard/kicad/enku-mainboard-r0.1.kicad_pcb and its schematic hardware/mainboard/kicad/connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Enku mainboard r0.1 design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).