Skip to the content

Boards using the IP4220CZ6

41 boards

Boards in 32 GitHub repositories, designed in KiCad, that use the IP4220CZ6 by UMW (0.3pF 15V 300W@8/20us 5V 80nA ESD IEC 61000-4-5 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the IP4220CZ6’s symbol, footprint and pinout are on its own page.

  • 2 layers100 × 95.1 mmProtoboard-6x4-breakout, the printed circuit board in 3D

    Protoboard-6x4-breakout

    electroniceel/protoboard

    Advanced protoboard layout with 1.27mm pitch for smd parts

    4,745 parts311CC-BY-4.0
  • 2 layers15 × 31 mmPocketAdmin, the printed circuit board in 3D

    PocketAdmin

    krakrukra/PocketAdmin

    oshw keystroke injection device ( badusb )

    25 parts241MIT
  • 2 layers75.2 × 61.1 mmHelios, the printed circuit board in 3D

    Helios

    Grix/helios_dac

    Helios Laser DAC

    102 parts132
  • 2 layers25.4 × 50.8 mmStm32....c breakout, the printed circuit board in 3D

    Stm32....c breakout

    electroniceel/stm32....c-breakout

    A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.

    59 parts20CC-BY-4.0
  • 2 layers50 × 75 mmLocalTrack, the printed circuit board in 3D

    LocalTrack

    krakrukra/LocalTrack

    OSHW GPS Tracker (Logger)

    63 parts18MIT
  • 2 layers46 × 84 mmVocore breakout, the printed circuit board in 3D

    Vocore breakout

    electroniceel/vocore2-breakout

    Breakout-board for the VoCore2

    88 parts11CC-BY-4.0
  • 4 layers100 × 132.5 mmIcE1usb panel, the printed circuit board in 3D

    IcE1usb panel

    osmocom/osmo-e1-hardware

    Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware

    240 parts9
  • 2 layers146 × 127 mmMT7620N, the printed circuit board in 3D

    MT7620N

    oshwlab/MakerRouter

    Rounter for makers.

    176 parts7
  • 2 layers124.5 × 66 mmBricoleur pcb, the printed circuit board in 3D

    Bricoleur pcb

    NTNU-TDT4295/BRICOLEUR

    This is the collision detection group's final submission for the course TDT4295 Computer Design Project 2018. This course aims to give students an introduction to the process of designing physical computer solutions…

    78 parts6
  • 4 layers50 × 56 mmVocore, the printed circuit board in 3D

    Vocore

    oshwlab/osbean-board

    Boards for OSBean.

    128 parts4
  • 2 layers60 × 100 mmBitMasher, the printed circuit board in 3D

    BitMasher

    superkittens/BitMasher-Hardware

    BitMasher hardware design files

    172 parts3
  • 4 layers31 × 45 mmTrick tracker, the printed circuit board in 3D

    Trick tracker

    HomeSmartMesh/bike_trick_tracker

    Tracking sensors for bike movements like height from pressure 9 axis and ToF with record and telemetry

    61 parts2MIT
  • 4 layers45.1 × 45.1 mmSuperPower uC KiCad, the printed circuit board in 3D

    SuperPower uC KiCad

    SuperPower/Artemis

    All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal

    99 parts2
  • 2 layers159.6 × 109.6 mmLinefollower, the printed circuit board in 3D

    Linefollower

    BardinPetr/letovo-linefollower

    130 parts
  • 4 layers236.1 × 156.9 mmImpeller18, the printed circuit board in 3D

    Impeller18

    buglalis/degree

    764 parts
  • 6 layers245.6 × 153.7 mmMain schematic, the printed circuit board in 3D

    Main schematic

    datamaskinprosjekt/PCB

    248 partsMIT
  • 2 layers75.2 × 61.1 mmHelios, the printed circuit board in 3D

    Helios

    Fer040848/Helios

    Open source, low cost USB DAC for the ISP-DB25 (ILDA) laser protocol. Allows you to control an ILDA laser projector via computer over USB. Supports lots of third party software (see link above).

    101 parts
  • 2 layers15.2 × 33.4 mmBocal HIDKey, the printed circuit board in 3D

    Bocal HIDKey

    Freimor/HRDW-HIDKey

    HID device for easy loadout new MAC with setup script.

    39 partsMIT
  • 2 layers87.6 × 92.1 mmProtogen PCB left, the printed circuit board in 3D

    Protogen PCB left

    Freimor/Protogen_Helmet_1

    Protogen helmet for Wolfy

    172 partsMIT
  • 4 layers210.7 × 85 mmTripSitter, the printed circuit board in 3D

    TripSitter

    Henryen-cyber/Datamskinprosjekt

    Hex for MCU are packaged in the Github releases.

    194 parts
  • 4 layers32.7 × 35 mmOrin nano controller, the printed circuit board in 3D

    Orin nano controller

    NathanHowell/orin-nano-controller

    Four Jetson boot/control straps land on the 12-pin right-angle socket (J2). They are driven by two SN74LVC2G07 dual open-drain buffers: IC1 handles the APO and RESET lanes, IC2 handles RECOVERY and POWER.

    29 parts
  • 2 layers37.3 × 44.2 mmNiche, the printed circuit board in 3D

    Niche

    shvass/neo-schematics

    26 parts
  • 4 layers45.1 × 45.1 mmSuperPower uC KiCad, the printed circuit board in 3D

    SuperPower uC KiCad

    SuperPower/Apollo

    All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal

    113 parts
  • 4 layers44 × 33 mmAnastasia, the printed circuit board in 3D

    Anastasia

    Viva-la-Insomnia/OSHW-Smartwatch

    Contribute by contacting us / sending in a pull request. Welcome additions: integration of https://github.com/NordicSemiconductor/ble-sdk-efm32/, USB code.

    99 parts