Skip to the content
2 layers25.4 × 50.8 mmStm32....c breakout, the printed circuit board in 3D

A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.

Size
25.4 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
57
Pads
286
Tracks, vias
1,357, 92
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
5 May 2016
Updated
5 Jan 2018

Overview

Stm32....c breakout is an open-source printed circuit board by electroniceel, from the electroniceel/stm32....c-breakout repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 25.4 × 50.8 mm with 59 parts on 57 nets, routed with 1,357 tracks and 92 vias.

It is built around the STM32F103CBT6, IP4220CZ6 and XC6204B332MR, with the BAT54S, BC817 and BSS138 among its other parts. Its parts include 16 capacitors, 12 resistors, 5 connectors, 3 ICs and 3 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

6

README

README.md

STM32....C (LQFP48 and UFQFPN48) Breakout Module

A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.

Basic Features

  • Focus on small footprint and direct access to most pins.
  • 40 pins broken out, organized as two single row headers in 2.54mm pitch
  • Footprints for USB-B (THT) or Micro-USB (SMT) Header
  • Provides a 8 pin Micro-MaTch header for easy access to SWD and UART.
  • Pushbutton for Reset (press <1 second) and starting the bootloader (press >3 seconds).
  • Onboard LDO regulator (standard SOT-23-5) can be used for VDD and VDDA, just VDD or bypassed completely.
  • USB VBUS (5V) is available on a pin and can be routed to the onboard LDO
  • Dedicated USB disconnect function with proper pullup & disable (conforming to USB spec, not some dirty trickery)
  • Use of a crystal (SMT 3.2x2.5mm) is optional.
  • Options can be configured using solder bridges.
  • Power LED and User LED (on PC13, PB13 or disconnected).
  • Size: 25x51mm or 20x10 pins in the standard 2.54mm raster

Available pins

These pins are available on the 2.54mm headers:

  • PA0 - PA12, PA15
  • PB0 - PB15
  • PC13 - PC15
  • 5V (USB Vbus or input to the LDO regulator)
  • Vdd
  • Vdda
  • Vbat
  • NRST
  • GND (2 times), also used on Vssa

These pins are also available on the Micro-MaTch:

  • SWCLK, SWDIO, SWO
  • NRST
  • GND
  • Vdd
  • UART RX, UART TX (which ones can be selected via solder bridges)

These pins are not individually broken out:

  • Vssa (directly connected to GND)
  • PD0, PD1 (only connected to the onboard crystal pads)
  • Boot0 (only connected to the reset / bootloader button)

Comparison to the popular "Blue Pill" boards

  • Allows to select the STM32 model you want, even the F4 models
  • Allows to select the optimal power configuration via solder bridges
  • Gives access to the bootloader via button press
  • USB disconnect function allows using USB based bootloaders without hassle
  • Better engineered
    • Proper ESD protection for USB
    • Ferrite beads in the power traces
    • Pads for proper decoupling caps
  • Conveniant development with SWD, SWO, NRST, UART on one Micro-MaTch connector
  • Possible to use THT USB-B sockets which are mechanically more stable

Downside is that it is larger, Blue Pill uses 20x7 pins raster.

Some of the supported microcontrollers

  • STM32F070CB
  • STM32F072C8, STM32F072CB
  • STM32F102C8, STM32F102CB
  • STM32F103C8, STM32F103CB
  • STM32F301C8
  • STM32F302C8, STM32F302CB, STM32F302CC
  • STM32F303C8, STM32F303CB, STM32F303CC
  • STM32F334C6, STM32F334C8
  • STM32F401CB, STM32F401CC, STM32F401CD, STM32F401CE
  • STM32F411CC, STM32F411CE
  • STM32F412CE, STM32F412CG
  • STM32F413CG, STM32F413CH, STM32F423CH
  • STM32L151C6-A, STM32L151C8-A, STM32L151CB-A
  • STM32L152C6-A, STM32L152C8-A, STM32L152CB-A

These are just the ones that I checked for compatibility. Since ST regards pinout compatibility higly, nearly all STM32 controllers in LQFP48 and UFQFPN48 packages should work on this board.

Schematics & Layout

Schematics & Layout were done in KiCAD.

Schematics as PDF

Picture

Module and raw PCB

License

CC-BY

This work is licensed under a Creative Commons Attribution 4.0 International License.

Parts

59
QtyValueFootprintReferences
12Solderbridgemodules:SolderbridgeSB2, SB3, SB4, SB5, SB7, SB8, SB9, SB10, SB11, SB12, SB13, SB14
5100nmodules:SMD0603-wide-CC1, C5, C12, C13, C14
410Kmodules:SMD0603-wide-RR4, R6, R7, R11
31Kmodules:SMD0603-wide-RR1, R2, R8
31µmodules:SMD0603-wide-CC9, C10, C15
3FILTERmodules:SMD0805-wideFB1, FB2, FB3
210nmodules:SMD0603-wide-CC16, C17
220pFmodules:SMD0603-wide-CC3, C4
24.7µmodules:SMD0805-wide-CC8, C11
2CONN_01X20Pin_Headers:Pin_Header_Straight_1x20P2, P3
11.5Kmodules:SMD0603-wide-RR10
1100Rmodules:SMD0603-wide-RR5
112MHzmodules:smd-xtal-3225X1
11Mmodules:SMD0603-wide-RR9
11n 2KVmodules:SMD1206-wideC18
136Kmodules:SMD0603-wide-RR12
14.7µFmodules:SMD0805-wide-CC2
1820Kmodules:SMD0603-wide-RR3
1BAT54Smodules:SOT-23D4
1BC817modules:SOT-23Q2
1BSS138modules:SOT-23Q1
1IP4220CZ6modules:SOT-23-6U3
1MicroMatch_8pinConnectors_Micro-MaTch:Conn-Micromatch-SMD-8P1
1STM32F103CBmodules:QFN-48_LQFP-48_Pitch0.5mmU1
1SW_PUSHmodules:Push-Button-SMD-6.0x3.5mmSW1
1Solderbridgemodules:Solderbridge-wideSB1
1USB_Bmodules:USB_B-THTP4
1USB_OTGmodules:Micro-USB-AB-receptacle-SMTP5
1USER_LEDmodules:SMD0603-wide-diodeD1
1XC6204B332MRmodules:SOT-23-5U2
1greenmodules:SMD0603-wide-diodeD3

Similar boards

  • 4 layers100 × 100 mmMWGEN G1, the printed circuit board in 3D

    MWGEN G1

    MR-DOS/MWGEN-G1

    12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.

    373 parts18GPL-3.0
  • 2 layers20.4 × 32.3 mmStm32f0..f breakout, the printed circuit board in 3D

    Stm32f0..f breakout

    electroniceel/stm32f0..f-breakout

    STM32F0..F (TSSOP20) Breakout Module

    35 parts2CC-BY-4.0
  • 2 layers46 × 38 mmNode, the printed circuit board in 3D

    Node

    feklee/san

    Self Aware Network

    39 parts8WTFPL
  • 2 layers124.5 × 66 mmBricoleur pcb, the printed circuit board in 3D

    Bricoleur pcb

    NTNU-TDT4295/BRICOLEUR

    This is the collision detection group's final submission for the course TDT4295 Computer Design Project 2018. This course aims to give students an introduction to the process of designing physical computer solutions…

    78 parts6
  • 4 layers236.1 × 156.9 mmImpeller18, the printed circuit board in 3D

    Impeller18

    buglalis/degree

    764 parts
  • 2 layers88.9 × 101.6 mmFrames v03, the printed circuit board in 3D

    Frames v03

    jonstapleton/mutable_eurorack

    Eurorack modules

    165 parts
  • 4 layers82.6 × 76.2 mmControl pcb, the printed circuit board in 3D

    Control pcb

    jrleeman/NSSL_EFM

    NSSL EFM Redesign

    86 parts

Questions

How big is the Stm32....c breakout PCB?

It measures 25.4 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stm32....c breakout use?

59 parts, built around the STM32F103CBT6, IP4220CZ6, XC6204B332MR and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm32....c breakout KiCad files?

From the electroniceel/stm32....c-breakout repository on GitHub, at the commit this page was made from: the board is stm32....c-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm32....c breakout design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).