4 layers45.1 × 45.1 mm
SuperPower uC KiCad
SuperPower/Apollo
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
112 parts
4 layers45.1 × 45.1 mm
SuperPower uC KiCad
SuperPower/ApolloAll hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
- Size
- 45.1 × 45.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 78
- Pads
- 375
- Tracks, vias
- 807, 213
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Feb 2021
- Updated
- 5 Aug 2021
Overview
SuperPower uC KiCad is an open-source printed circuit board by SuperPower, from the SuperPower/Apollo repository on GitHub. It is a 4-layer board of 45.1 × 45.1 mm with 113 parts on 78 nets, routed with 807 tracks and 213 vias.
It is built around the TPS63070RNMT, AP9101CK6-AYTRG1 and IP4220CZ6, with the LTC4162EUFD-LAD#PBF, RV-3028-C7 and 2N7002A among its other parts. Its parts include 39 resistors, 26 capacitors, 13 transistors, 8 ICs and 7 connectors.
Main components
12
TPS63070RNMT
VQFN-15-HR(2.5x3)-40℃~+125℃@(TJ) 1 2.4MHz 2.5V~9V 2A 2V~16V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-15-HR(2.5x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AP9101CK6-AYTRG1
SOT-26-40℃~+85℃ 1 1.5V~5.5V 10nA 2.8V 4.275V Lithium Battery Not supported Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection、Overvoltage Protection Protection IC SOT-26 Battery Management ROHSDiodes IncorporatedBattery ManagementIP4220CZ6
SOT-23-60.3pF 15V 300W@8/20us 5V 80nA ESD IEC 61000-4-5 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
LTC4162EUFD-LAD#PBF
QFN-28(4x5)-40℃~+125℃ 115uA 1~8 3.2A 4.2V 4.5V~35V Charging IC I2C Lithium Battery Support Support QFN-28(4x5) Battery Management ROHSAnalog DevicesBattery Management
RV-3028-C7
DFN-8(1.5x3.2)DFN-8(1.5x3.2) Real Time Clocks ROHSMicro CrystalReal Time Clocks
2N7002A
SOT-23-55℃~+150℃ 1 N-channel 1.4pF 220mA 23pF 2V 3.4pF 3Ω@10V 540mW 60V N-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsDMP2035UVT
TSOT-26-55℃~+150℃ 1 P-Channel 1.5V 2.4nF 200pF 20V 210pF 23.1nC@4.5V 2W 45mΩ@2.5V 6A P-Channel TSOT-26 MOSFETs ROHSDiodes IncorporatedMOSFETs
CC0603JRX7R9BB104
0603100nF 50V X7R ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
CL31B106KAHNNNE
120610uF 25V X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTDMN3023L-7
SOT-23-55℃~+150℃ 1 N-channel 1.3W 1.8V 18.4nC 25mΩ@10V 30V 6.2A 67pF 873pF SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
RL0805FR-7W0R068L
0805250mW 68mΩ Thick Film Resistor ±1% ±1000ppm/℃ 0805 Chip Resistor - Surface Mount ROHSYAGEOCurrent Sense Resistors / Shunt Resistors
SPM6530T-1R5M-HZ
SMD,7.1x6.5mm1.5uH 11.6A 7A 9.7mΩ ±20% SMD,7.1x6.5mm Power Inductors ROHSTDKPower Inductors
README
README.mdSuperPower
Here you should find the best power supplies for your low-power projects. Because of different requirements for an Raspberry Pi and micro-controllers like the ESP32 we split the project into two boards, one for the Raspberry Pi (SuperPower-Rpi) and one for micro-controllers (SuperPower-uC) with low power.
SuperPower-Rpi for Raspberry Pi
SuperPower-uC for micro-controllers and low-power devices
Licence
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
Relevant links
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10μF | Capacitor_SMD:C_0805_2012Metric | C16, C17, C18, C19, C20, C21, C24, C25 |
| 7 | 1M | Resistor_SMD:R_0603_1608Metric | R11, R17, R25, R26, R41, R42, R43 |
| 6 | 22μF | Capacitor_SMD:C_0805_2012Metric | C26, C27, C28, C29, C30, C31 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R15, R16, R24, R44, R45 |
| 5 | 390k | Resistor_SMD:R_0603_1608Metric | R9, R19, R39, R54, R55 |
| 4 | 2N7002A | Package_TO_SOT_SMD:SOT-23 | Q4, Q9, Q10, Q11 |
| 4 | DMP2035UVT | Package_TO_SOT_SMD:SOT-23-6 | Q5, Q12, Q13, Q14 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C8, C22, C23 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R23, R46, R48 |
| 3 | DNP/0 | Resistor_SMD:R_0603_1608Metric | R2, R4, R18 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R8, R12 |
| 2 | 2.2μF | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | CC0603JRX7R9BB104 | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | CL31B106KAHNNNE | Capacitor_SMD:C_1206_3216Metric | C6, C7 |
| 2 | DMN3023L | Package_TO_SOT_SMD:SOT-23 | Q3, Q15 |
| 2 | RL0805FR-7W0R068L | Resistor_SMD:R_0805_2012Metric | R13, R20 |
| 2 | SPM6530T-1R5M | SPM6530T-1R5M:L_TDK_SPM6530T | L2, L3 |
| 2 | TPS63070RNMT | TPS63070RNM:VREG_TPS63070RNMR | U9, U10 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP5 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 130k | Resistor_SMD:R_0603_1608Metric | R49 |
| 1 | 150060VS75000_0603 | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | 150060YS75000_0603 | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 3V3_I2C | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 63.4k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | AP9101CK6-AYTRG1 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | BATT- | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | BSS84-7-F | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | CL10B105KO8NNNC | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | CL10B223KB8NNNC | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | Conn_01x02_Male | ext_input:ext_input_pads | J3 |
| 1 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J11 |
| 1 | Conn_01x13_Male | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J10 |
| 1 | DFLS230L | Diode_SMD:D_PowerDI-123 | D1 |
| 1 | DMN2019UTS | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | DNP/JST_XH_S2B_thru | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | DNP/JST_ZH_S2B_thru | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | DNP/SKRKAEE020 | SKRKAEE020:SKRKAEE020 | SW1 |
| 1 | ERJ-P06F4700V | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | IP4220CZ6 | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | U3 |
| 1 | JST_PH_S2B_thru | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Jumper_NC_Small | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | JP2 |
| 1 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | LTC4162EUFD-LAD | Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias | U4 |
| 1 | RV-3028-C7 | RV-3028-C7:IC_RV-3028-C7 | U5 |
| 1 | SPM6530T-4R7M | SPM6530T-4R7M:L_TDK_SPM6530T | L1 |
| 1 | Si3421DV | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | Q2 |
| 1 | SolderJumper_4_Bridged_1C | SOLDERJUMPER_4_BRIDGED_1C:SolderJumper-4_P2.0mm_Bridged1C_TrianglePad1.0x1.5mm_NumberLabels | JP1 |
| 1 | TMK212AB7475KG-T | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | TPS70933DRVT | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | USB-C | usb_c:usb-c-usb4105 | U2 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
More from SuperPower/Apollo
1Similar boards
- 2 layers65 × 56 mm
- 4 layers33 × 77 mm
ELEC3885
frankplow/ELEC3885
A robust and lightweight helmet-mounted safety camera for cycling
115 parts - 6 layers254 × 130 mm
- 4 layers82 × 55 mm
Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 2 layers54.4 × 27.9 mm
USB C-12V-2A BUCK BOOST CONVERTER
Rodolfo855/USB-C-12V-2A-BUCK-BOOST-CONVERTER
USB-C 12V @ 2AM BUCK BOOST CONVERTER
30 partsMIT - 2 layers88 × 88 mm
Acoustic levitation main
leastrobino/acoustic-levitation
Mirror of GitLab repository, all issues and pull requests should be created there.
68 parts21 - 2 layers45 × 20 mm
Cat Sink
ElectronicCats/Cat-Sink
A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller
41 parts15 - 2 layers43 × 108 mm
Bird3Controller
ysoyjcgoxohxoh/Bird3
Drop-in replacement Bird Brain design for Bird 3 scooters.
69 parts8MIT
Questions
How big is the SuperPower uC KiCad PCB?
It measures 45.1 × 45.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SuperPower uC KiCad use?
113 parts, built around the TPS63070RNMT, AP9101CK6-AYTRG1, IP4220CZ6 and LTC4162EUFD-LAD#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperPower uC KiCad KiCad files?
From the SuperPower/Apollo repository on GitHub, at the commit this page was made from: the board is apollo-board/SuperPower-uC-KiCad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperPower uC KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask SuperPower before reusing the design.