
Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts

Niche is an open-source printed circuit board by shvass, from the shvass/neo-schematics repository on GitHub. It is a 2-layer board of 37.3 × 44.2 mm with 26 parts on 50 nets, routed with 249 tracks and 15 vias.
It is built around the ESP32-S3-WROOM-1-N8 and IP4220CZ6. Its parts include 8 capacitors, 4 connectors, 3 ICs, 2 resistors and 1 diode. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C7 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8 |
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3, J7 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J5 |
| 1 | ESP32-S3-WROOM-1 | vrc-kicad:ESP32-S3-WROOM-1 | U2 |
| 1 | IP4220CZ6 | vrc-kicad:SOT95P275X110-6N | U3 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | TL-1117LV33 | vrc-kicad:SOT-223-3_TabPin2 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J2 |
| 1 | flash | vrc-kicad:SW_TACK_SMD | flash |
| 1 | reset | vrc-kicad:SW_TACK_SMD | reset |

electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts



electroniceel/stm32....c-breakout
A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.



osmocom/osmo-e1-hardware
Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware

It measures 37.3 × 44.2 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ESP32-S3-WROOM-1-N8 and IP4220CZ6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shvass/neo-schematics repository on GitHub, at the commit this page was made from: the board is niche.kicad_pcb and its schematic niche.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shvass before reusing the design.